Protective equipment for martial arts - Part 7: Additional requirements and test methods for hand and foot protectors

This European Standard specifies additional requirements and test methods for hand and foot protectors which are used in unarmed martial arts, including boxing, for strikes against other persons or training equipment.

Schutzausrüstung für den Kampfsport - Teil 7: Zusätzliche Anforderungen und Prüfverfahren für Hand- und Fußschützer

Dieses Dokument legt zusätzliche Anforderungen und Prüfverfahren an Hand- und Fußschützer für unbewaffnete
Kampfsportarten, einschließlich Boxen fest, die für Schläge gegen andere Personen oder gegen
Trainingsgeräte verwendet werden.

Équipement de protection pour les arts martiaux - Partie 7: Exigences et méthodes d'essai complémentaires relatives aux protecteurs de main et de pied

La présente Norme européenne spécifie des exigences et méthodes d’essai complémentaires relatives aux
protecteurs de main et de pied utilisés dans les arts martiaux, y compris la boxe, pour les frappes contre
d’autres personnes ou un équipement d’entraînement.

Varovalna oprema za borilne športe - 7. del: Dodatne zahteve in preskusne metode za ščitnike rok in nog

General Information

Status
Published
Publication Date
10-Mar-2009
Current Stage
9020 - Submission to 2 Year Review Enquiry - Review Enquiry
Start Date
15-Jul-2024
Completion Date
15-Jul-2024

Buy Standard

Standard
EN 13277-7:2009
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzausrüstung für den Kampfsport - Teil 7: Zusätzliche Anforderungen und Prüfverfahren für Hand- und FußschützerEquipement de protection pour les arts martiaux - Partie 7 : Exigences et méthodes d'essai complémentaires pour protecteurs de main et de piedProtective equipment for martial arts - Part 7: Additional requirements and test methods for hand and foot protectors97.220.30Oprema za dvoranske športeIndoor sports equipment13.340.50Varovanje nog in stopalLeg and foot protection13.340.40Varovanje dlani in rokHand and arm protectionICS:Ta slovenski standard je istoveten z:EN 13277-7:2009SIST EN 13277-7:2009en,fr,de01-julij-2009SIST EN 13277-7:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13277-7March 2009ICS 13.340.40; 13.340.50 English VersionProtective equipment for martial arts - Part 7: Additionalrequirements and test methods for hand and foot protectorsÉquipement de protection pour les arts martiaux - Partie 7:Exigences et méthodes d'essai complémentaires relativesaux protecteurs de main et de piedSchutzausrüstung für den Kampfsport - Teil 7: ZusätzlicheAnforderungen und Prüfverfahren für Hand- undFußschützerThis European Standard was approved by CEN on 31 January 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13277-7:2009: ESIST EN 13277-7:2009

Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC . 17 Figures Figure 1 — Dimensions of hand protectors, class A . 7 Figure 2 — Dimensions of hand protectors, class B . 8 Figure 3 —Zone of protection on the hand protector, class A . 9 Figure 4 — Zones of protection of the hand protector, class B . 10 Figure 5 — Positioning of the zone of protection of foot protectors . 11 Figure 6 — Direction of the force applied on hand protectors . 13 Figure 7 — Direction of the force applied on foot protectors . 14 Figure 8 — Principle of impact testing of hand protectors and foot . 15 SIST EN 13277-7:2009

1 Scope This European Standard specifies additional requirements and test methods for hand and foot protectors which are used in unarmed martial arts, including boxing, for strikes against other persons or training equipment. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13277-1:2000, Protective equipment for martial arts — Part 1: General requirements and test methods 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 hand protector equipment worn on the hand to protect the user against injuries caused by strikes against other persons or training equipment
3.2 foot protector equipment to protect the entire foot (without the sole area) against injuries caused by strikes against other persons or training equipment
4 Classification 4.1 Hand protectors The following classes of hand protectors are defined:  Class A: Hand protectors comprising a zone of normal (simple) protection (see Figure 1).  Class B: Hand protectors comprising a zone of increased protection (see Figure 2). 4.2 Foot protectors There are no different classes specified. 5 Requirements 5.1 Innocuousness Hand and foot protectors shall comply with the requirements in EN 13277-1:2000, 4.2. SIST EN 13277-7:2009

5.3 Combinations Hand protectors or foot protectors can be used together with other protective equipment for martial arts. If the combined use is not appropriate, this shall be indicated in the information supplied by the manufacturer. 5.4 Restraint
The restraint system shall meet the requirements defined in EN 13277-1:2000, 4.3. A restraint system shall be supplied by the manufacturer which enables the user to attach the foot protector without any assistance. In the case of hand protectors, the assistance of an additional person may be necessary. The protector shall remain in place during use.
Restraint devices shall be so designed that they may not cause unnatural forces or movements or constrict limbs. Testing shall be carried out according to 6.3.
5.5 Zone of protection 5.5.1 General Dimensions and positions with respect of the hand or the foot to the zones of protection of hand protectors and foot protectors are defined by Figures 1 to 5 and by Tables 1 to 3.
5.5.2 Hand protectors 5.5.2.1 Dimensions 5.5.2.1.1 Class A For dimensions of the zone of protection, see Figure 1 and Table 1. SIST EN 13277-7:2009

Key
1 wrist area 2 zone of protection Figure 1 — Dimensions of hand protectors, class A Table 1 — Dimensions of hand protectors, class A Dimensions in millimetres Size x1 maximum x2 minimum y minimum r maximum
5 10
70 60 20
6 15
80 65
7 20
90 70
8 25 100 75
9 30 110 80 10 35 120 85 11 40 130 90
5.5.2.1.2 Class B For dimensions of the zone of protection see Figure 2 and Table 2. SIST EN 13277-7:2009

Key 1 wrist area 2 zone of protection 1 3 zone of protection 2 Figure 2 — Dimensions of hand protectors, class B Table 2 — Dimensions of hand protectors, class B Dimensions in millimetres Size x1 x2 x3 x4 y1 y2 r1 r2 r3 r4 maximum minimum maximum minimumminimumminimummaximummaximum maximum maximum
5 10 230
70 210 65
75 10 10 10 30
6 15 250
90 230 70
80 10 10 10 30
7 20 270 110 245 75
85 10 10 10 35
8 25 285 125 260 80
90 15 15 15 35
9 30 300 140 270 85
95 15 15 15 40 10 35 310 150 280 90 100 15 15 15 40 11 40 320 160 285 95 105 15 15 15 45
5.5.2.2 Positioning 5.5.2.2.1 General The dimensions are defined on the ou
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.