EN ISO 29469:2022
(Main)Thermal insulating products for building applications - Determination of compression behaviour (ISO 29469:2022)
Thermal insulating products for building applications - Determination of compression behaviour (ISO 29469:2022)
This document specifies the equipment and procedures for determining the compression behaviour of specimens. It is applicable to thermal insulating products and can be used to determine the compressive stress in compressive creep tests and for applications in which insulation products are exposed only to short-term loads.
The method can be used for quality control purposes and can also be employed to obtain reference values from which design values can be calculated using safety factors.
Wärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei Druckbeanspruchung (ISO 29469:2022)
Dieses Dokument legt Prüfeinrichtungen und Verfahren zur Bestimmung des Verhaltens von Probekörpern bei Druckbeanspruchung fest. Es gilt für Wärmedämmstoffe und kann zur Bestimmung der Druckspannung bei Druck-Kriech-Versuchen und für Anwendungen, bei denen Wärmedämmstoffe nur kurzzeitig belastet werden, angewendet werden.
Das Verfahren kann zur Qualitätskontrolle eingesetzt werden und dient auch dazu, Referenzwerte zu ermitteln, aus denen mit Sicherheitsfaktoren Auslegungswerte berechnet werden können.
Produits isolants thermiques destinés aux applications du bâtiment - Détermination du comportement en compression (ISO 29469:2022)
Le présent document spécifie l’équipement et les modes opératoires pour déterminer le comportement en compression des éprouvettes. Il s’applique aux produits isolants thermiques et peut être utilisé pour déterminer la contrainte en compression lors des essais de fluage en compression et pour des applications dans lesquelles les produits isolants ne sont soumis qu’à des charges de courte durée.
La méthode peut être utilisée à des fins de contrôle de la qualité et peut également être employée pour obtenir des valeurs de référence à partir desquelles des valeurs de conception peuvent être calculées en utilisant des facteurs de sécurité.
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje obnašanja pri tlačni obremenitvi (ISO 29469:2022)
Ta evropski standard določa opremo in postopke za ugotavljanje obnašanja pri tlačni obremenitvi preskušancev. Uporablja se za toplotnoizolacijske proizvode in tudi za določanje tlačne napetosti v tlačnih preskusih lezenja ter za načine uporabe, pri katerih so izolacijski proizvodi samo začasno obremenjeni. Ta metoda se lahko uporablja za preverjanje kakovosti. Lahko se uporablja tudi za pridobivanje referenčnih vrednosti, na podlagi katerih se s pomočjo varnostnih dejavnikov lahko izračunajo vrednosti projektiranja.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2023
Nadomešča:
SIST EN 826:2013
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje obnašanja
pri tlačni obremenitvi (ISO 29469:2022)
Thermal insulating products for building applications - Determination of compression
behaviour (ISO 29469:2022)
Wärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei
Druckbeanspruchung (ISO 29469:2022)
Produits isolants thermiques destinés aux applications du bâtiment - Détermination du
comportement en compression (ISO 29469:2022)
Ta slovenski standard je istoveten z: EN ISO 29469:2022
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 29469
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2022
EUROPÄISCHE NORM
ICS 91.100.60 Supersedes EN 826:2013
English Version
Thermal insulating products for building applications -
Determination of compression behaviour (ISO
29469:2022)
Produits isolants thermiques destinés aux applications Wärmedämmstoffe für das Bauwesen - Bestimmung
du bâtiment - Détermination du comportement en des Verhaltens bei Druckbeanspruchung (ISO
compression (ISO 29469:2022) 29469:2022)
This European Standard was approved by CEN on 23 October 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 29469:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 29469:2022) has been prepared by Technical Committee ISO/TC 163 "Thermal
performance and energy use in the built environment" in collaboration with Technical Committee
CEN/TC 88 “Thermal insulating materials and products” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2023, and conflicting national standards shall be
withdrawn at the latest by November 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 826:2013.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 29469:2022 has been approved by CEN as EN ISO 29469:2022 without any modification.
INTERNATIONAL ISO
STANDARD 29469
Second edition
2022-10
Thermal insulating products
for building applications —
Determination of compression
behaviour
Produits isolants thermiques destinés aux applications du bâtiment —
Détermination du comportement en compression
Reference number
ISO 29469:2022(E)
ISO 29469:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 29469:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Test specimens . 4
6.1 Dimensions of specimens . 4
6.2 Specimen preparation . 4
6.3 Number of specimens . 4
6.4 Conditioning of specimens . 5
7 Procedure .5
7.1 Test conditions . 5
7.2 Test procedure . 5
8 Calculation and expression of results . 5
8.1 Compressive strength and corresponding strain . 5
8.1.1 Compressive strength . 5
8.1.2 Strain. 6
8.2 Compressive stress at 10 % strain . 6
8.3 Compression modulus of elasticity . 6
9 Accuracy . 7
10 Test report . 7
Annex A (normative) Modifications to the general test method for cellular glass products .9
iii
ISO 29469:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 163, Thermal performance and energy use
in the built environment, Subcommittee SC 1, Test and measurement methods, in collaboration with the
European Committee for Standardization (CEN) Technical Committee CEN/TC 88, Thermal insulating
materials and products, in accordance with the Agreement on technical cooperation between ISO and
CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 29469:2008), which has been technically
revised.
The main changes are as follows:
— subclause 5.1 has been modified;
— the conditioning and testing conditions in 6.4 and 7.1 have been modified;
— subclause 8.1.2 has been clarified;
— Annex A, modifications have been made to the general test method for cellular glass products to
include capping in the test protocol;
— some editorial corrections have been made.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
INTERNATIONAL STANDARD ISO 29469:2022(E)
Thermal insulating products for building applications —
Determination of compression behaviour
1 Scope
This document specifies the equipment and procedures for determining the compression behaviour of
specimens. It is applicable to thermal insulating products and can be used to determine the compressive
stress in compressive creep tests and for applications in which insulation products are exposed only to
short-term loads.
The method can be used for quality control purposes and can also be employed to obtain reference
values from which design values can be calculated using safety factors.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.