EN ISO 1927-3:2012
(Main)Monolithic (unshaped) refractory products - Part 3: Characterization as received (ISO 1927-3:2012)
Monolithic (unshaped) refractory products - Part 3: Characterization as received (ISO 1927-3:2012)
ISO 1927-3:2012 specifies the methods for the characterization of monolithic (unshaped) refractory materials as received and for checking the homogeneity of a delivery of a product. It is applicable to castables (dense and insulating), gunning materials tap hole clay, injection mixes, dry vibrating mixes, and ramming materials, as defined in ISO 1927-1.
Ungeformte (monolithische) feuerfeste Erzeugnisse - Teil 3: Prüfung im Anlieferungszustand (ISO 1927-3:2012)
Dieser Teil der ISO 1927 legt die Verfahren zur Prüfung ungeformter (monolithischer) feuerfester Erzeugnisse im Anlieferungszustand und für die Prüfungen der Gleichmäßigkeit von Lieferungen eines Erzeugnisses fest. Er gilt für die in ISO 1927 1 festgelegten Feuerbetone (dichten Feuerbetone und wärmedämmenden Feuerbetone), feuerfesten Spritzmassen, Stichlochmassen, Einpressmassen, Trocken¬massen sowie Rammmassen.
ANMERKUNG Eine Übersicht geeigneter Prüfungen ist im Anhang A aufgeführt.
Produits réfractaires monolithiques (non façonnés) - Partie 3: Caractérisation à l'état de réception (ISO 1927-3:2012)
L'ISO 1927-3:2012 spécifie les méthodes pour la caractérisation des matériaux réfractaires monolithiques (non façonnés) à l'état de réception et pour le contrôle de l'homogénéité d'une livraison de produits. Elle s'applique aux bétons (denses et isolants), aux matériaux projetables, argiles de bouchage, mélanges injectables, pisés et aux matériaux moulables, tels que définis dans l'ISO 1927-1.
Neoblikovani (monolitni) ognjevzdržni izdelki - 3. del: Pripravljeni neoblikovani izdelki (ISO 1927-3:2012)
Ta del standarda ISO 1927 določa metode za opis neoblikovanih (monolitnih) ognjevzdržnih izdelkov, kot so prejeti, in za preskušanje homogenosti dobave izdelka. Velja za betone (goste in izolacijske), gline kot mašilne materiale za torkretiranje, vbrizgane mešanice, suhe vibracijske mešanice in mašilne materiale, kot so določeni s standardom ISO 1927-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2013
1DGRPHãþD
SIST EN 1402-3:2004
Neoblikovani (monolitni) ognjevzdržni izdelki - 3. del: Pripravljeni neoblikovani
izdelki (ISO 1927-3:2012)
Monolithic (unshaped) refractory products - Part 3: Characterization as received (ISO
1927-3:2012)
Ungeformte (monolithische) feuerfeste Erzeugnisse - Teil 3: Prüfung im
Anlieferungszustand (ISO 1927-3:2012)
Produits réfractaires monolithiques (non façonnés) - Partie 3: Caractérisation à l'état de
réception (ISO 1927-3:2012)
Ta slovenski standard je istoveten z: EN ISO 1927-3:2012
ICS:
81.080 Ognjevzdržni materiali Refractories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 1927-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 81.080 Supersedes EN 1402-3:2003
English Version
Monolithic (unshaped) refractory products - Part 3:
Characterization as received (ISO 1927-3:2012)
Produits réfractaires monolithiques (non façonnés) - Partie Ungeformte (monolithische) feuerfeste Erzeugnisse - Teil 3:
3: Caractérisation à l'état de réception (ISO 1927-3:2012) Prüfung im Anlieferungszustand (ISO 1927-3:2012)
This European Standard was approved by CEN on 30 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1927-3:2012: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 1927-3:2012) has been prepared by Technical Committee ISO/TC 33 "Refractories"
in collaboration with Technical Committee CEN/TC 187 “Refractory products and materials” the secretariat of
which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1402-3:2003.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 1927-3:2012 has been approved by CEN as a EN ISO 1927-3:2012 without any modification.
INTERNATIONAL ISO
STANDARD 1927-3
First edition
2012-12-01
Monolithic (unshaped) refractory
materials —
Part 3:
Characterization as received
Produits réfractaires monolithiques (non façonnés) —
Partie 3: Caractérisation à l’état de réception
Reference number
ISO 1927-3:2012(E)
©
ISO 2012
ISO 1927-3:2012(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
ISO 1927-3:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Principle . 2
4 Sampling . 3
5 Determination of chemical composition . 3
5.1 Preparation of test sample . 3
5.2 Alumina-silica products . 3
5.3 Basic products . 3
5.4 Special products . 3
5.5 Carbon-containing products . 3
6 Determination of grain-size distribution . 3
6.1 Principle . 3
6.2 Apparatus . 3
6.3 Quantity of sample . 4
6.4 Preparation of test samples . 4
6.5 Procedure . 4
6.6 Expression of results . 6
7 Determination of moisture content . 6
7.1 Preparation of test sample . 6
7.2 Quantity of sample . 6
7.3 Procedure . 6
7.4 Calculation . 7
8 Determination of workability index . 7
8.1 General . 7
8.2 Apparatus . 7
8.3 Preparation of test pieces . 9
8.4 Procedure and calculation .10
9 Test report .10
Annex A (informative) Summary of tests . 11
ISO 1927-3:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 1927-3 was prepared by Technical Committee ISO/TC 33, Refractories.
ISO 1927 consists of the following parts, under the general title Monolithic (unshaped) refractory products:
— Part 1: Introduction and classification
— Part 2: Sampling for testing
— Part 3: Characterization as received
— Part 4: Determination of consistency of castables
— Part 5: Preparation and treatment of test pieces
— Part 6: Measurement of physical properties
— Part 7: Tests on pre-formed shapes
— Part 8: Determination of complementary properties
iv © ISO 2012 – All rights reserved
INTERNATIONAL STANDARD ISO 1927-3:2012(E)
Monolithic (unshaped) refractory materials —
Part 3:
Characterization as received
1 Scope
This part of ISO 1927 specifies the methods for the characterization of monolithic (unshaped) refractory
materials as received and for checking the homogeneity of a delivery of a product. It is applicable to castables
(dense and insulating), gunning materials tap hole clay, injection mixes, dry vibrating mixes, and ramming
materials, as defined in ISO 1927-1.
NOTE A check list of appropriate tests is given in Annex A.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 565, Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
ISO 1927-1, Monolithic (unshaped) refractory products — Part 1: Introduction and classification
ISO 1927-2, Unshaped refractory materials — Part 2: Sampling for testing
ISO 10058-1, Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray
fluorescence method) — Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica
ISO 10058-2, Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray
fluorescence method) — Part 2: Wet chemical analysis
ISO 10058-3, Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray
fluorescence method) — Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled
plasma atomic emission spectrometry (ICP-AES)
ISO 12677, Chemical analysis of refractory products by XRF — Fused cast bead method
ISO 14719, Chemical analysis of refractory material, glass and glazes — Determination of iron 2+ and iron 3+
by the spectral photometric method with 1-10 phenanthroline
ISO 14
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.