EN 10264-1:2012

Steel wire and wire products - Steel wire for ropes - Part 1: General requirements

This part of this European Standard defines the general requirements for wire intended for mechanical steel ropes. Additional requirements are given in the following parts of this European Standard, which are specific to each category of wire.
This part of this European Standard specifies:
-   dimensional tolerances;
-   mechanical characteristics;
-   requirements relating to the chemical composition of the steel wire;
-   conditions to be satisfied by any coating.

Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 1: Allgemeine Anforderungen

Dieser Teil der Europäischen Norm legt die allgemeinen Anforderungen an Draht für Stahlseile fest. Zusätzliche Anforderungen sind in den weiteren Teilen dieser Europäischen Norm, die für bestimmte Drahtarten gelten, festgelegt.
Dieser Teil der Europäischen Norm betrifft:
- Maßtoleranzen;
- mechanische Eigenschaften;
- Anforderungen an die chemische Zusammensetzung des Stahldrahts;
- Anforderungen an Überzüge.

Fils et produits tréfilés en acier - Fils pour câbles - Partie 1: Prescriptions générales

La présente partie de la présente Norme européenne définit les prescriptions générales relatives aux fils
destinés aux câbles. Les exigences complémentaires sont données dans les parties suivantes de la présente
norme, spécifiques pour chaque catégorie de fil.
La présente partie de la norme européenne spécifie :
- les tolérances dimensionnelles ;
- les caractéristiques mécaniques ;
- les exigences relatives à la composition chimique des fils d’acier ;
- les conditions auxquelles un revêtement éventuel doit satisfaire.

Jeklena žica in žični izdelki - Jeklena žica za vrvi - 1. del: Splošne zahteve

Ta del tega evropskega standarda določa splošne zahteve za žico, namenjeno za mehanske jeklene vrvi. Dodatne zahteve so določene v naslednjih delih tega evropskega standarda, ki so značilni za vsako kategorijo žic. Ta del tega evropskega standarda določa: – tolerance mer; – mehanske značilnosti; – zahteve, povezane s kemijsko sestavo jeklene žice; – pogoje, ki jih morajo izpolnjevati premazi.

General Information

• Status: Published
• Publication Date: 10-Jan-2012
• Withdrawal Date: 30-Jul-2012
• ICS: 21.220.20 - Cable or rope drives and their components
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• Technical Committee: ECISS/TC 106 - Wire rod and wires
• Drafting Committee: ECISS/TC 106 - Wire rod and wires
• Current Stage: 9020 - Submission to 2 Year Review Enquiry - Review Enquiry
• Start Date: 15-Apr-2024
• Completion Date: 15-Apr-2024
• Ref Project: SIST EN 10264-1:2012 - Steel wire and wire products - Steel wire for ropes - Part 1: General requirements

Relations

• Replaces: EN 10264-1:2002 - Steel wire and wire products - Steel wire for ropes - Part 1: General requirements
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 1: Allgemeine AnforderungenFils et produits tréfilés en acier - Fils pour câbles - Partie 1: Prescriptions généralesSteel wire and wire products - Steel wire for ropes - Part 1: General requirements77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chainsICS:Ta slovenski standard je istoveten z:EN 10264-1:2012SIST EN 10264-1:2012en,fr,de01-marec-2012SIST EN 10264-1:2012SLOVENSKI
STANDARDSIST EN 10264-1:20031DGRPHãþD



SIST EN 10264-1:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10264-1
January 2012 ICS 77.140.65; 21.220.20 Supersedes EN 10264-1:2002English Version
Steel wire and wire products - Steel wire for ropes - Part 1: General requirements
Fils et produits tréfilés en acier - Fils pour câbles - Partie 1: Prescriptions générales
Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 1: Allgemeine Anforderungen This European Standard was approved by CEN on 19 November 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10264-1:2012: ESIST EN 10264-1:2012



EN 10264-1:2012 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Information to be supplied by the client .55Characteristics of and requirements for wire .55.1Diameter tolerances .55.2Tensile strength .55.2.1Tensile strength grade - permitted variations .55.2.2Procedure for tensile test .65.3Reverse bend test .65.4Torsion test .65.5Tensile test on knotted wire .65.6Coatings .76Inspection documents .77Sampling and compliance criteria .78Marking .
...