EN 13701:2001
(Main)Space systems - Glossary of terms
Space systems - Glossary of terms
This European Standard contains the definition of all common terms used in European space standards. Terms specific to a particular space standard are defined in that standard.
Raumfahrttechnik - Glossar
Dieses Dokument enthält die Definition der gebräuchlichsten Fachausdrücke, die im europäischen Raumfahrtnormenwerk benutzt werden. Fachausdrücke, die für eine Raumfahrtnorm spezifisch sind, werden in dieser Norm definiert.
Système spatiale - Vocabulaire
Le présent document passe en revue la définition des termes utilisés dans les normes spatiales européennes. Les termes propres à une norme spatiale particulière sont définis dans la norme en question.
Space systems - Glossary of terms
General Information
RELATIONS
Standards Content (sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Space systems - Glossary of termsRaumfahrttechnik - GlossarSysteme spatiale - VocabulaireSpace systems - Glossary of terms49.140Vesoljski sistemi in operacijeSpace systems and operations01.040.49Letalska in vesoljska tehnika (Slovarji)Aircraft and space vehicle engineering (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 13701:2001SIST EN 13701:2002en01-januar-2002SIST EN 13701:2002SLOVENSKI
STANDARDSIST EN 13701:2002
SIST EN 13701:2002
SIST EN 13701:2002
SIST EN 13701:2002
SIST EN 13701:2002
SIST EN 13701:2002
SIST EN 13701:2002
SIST EN 13701:2002
SIST EN 13701:2002
SIST EN 13701:2002
SIST EN 13701:2002
SIST EN 13701:2002
SIST EN 13701:2002
...
This May Also Interest You
This Standard specifies gyros functions and performances as part of a space project. This Standard covers aspects of functional and performance requirements, including nomenclature, definitions, functions and performance metrics for the performance specification of spaceborne gyros.
The Standard focuses on functional and performance specifications with the exclusion of mass and power, TM/TC interface and data structures.
When viewed from the perspective of a specific project context, the requirements defined in this Standard can be tailored to match the genuine requirements of a particular profile and circumstances of a project.
The requirements verification by test can be performed at qualification level only or also at acceptance level. It is up to the Supplier, in agreement with the customer, to define the relevant verification approach in the frame of a specific procurement, in accordance with clause 5.2 of ECSS-E-ST-10-02.
The present standard does not cover gyro use for launch vehicles.
This standard can be tailored for the specific characteristics and constraints of a space project in conformance with ECSS-S-ST-00.
- Standard52 pagesEnglish languagesale 10% offe-Library read for×1 day
- 11-Sep-2018
- 01.040.49
- 49.090
- 49.140
- M/496
- CEN/CLC/TC 5
This document controls the definition of all common terms used in the European Cooperation for Space Standardization (ECSS) Standards System. Terms specific to a particular ECSS Standard are defined in that standard.
This document does not include the definition of terms used with their common meaning. In this case, the definition from the Oxford English Dictionary applies.
- Standard62 pagesEnglish languagesale 10% offe-Library read for×1 day
- 27-Jan-2015
- 01.040.49
- 49.140
- M/496
- CEN/CLC/TC 5
This Standard specifies star sensor performances as part of a space project. The Standard covers all aspects of performances, including nomenclature, definitions, and performance requirements for the performance specification of star sensors.
The Standard focuses on:
- performance specifications (including the impact of temperature, radiation and straylight environments);
- robustness (ability to maintain functionalities under non nominal environmental conditions).
Other specification types, for example mass and power, housekeeping data and data structures, are outside the scope of this Standard.
This Standard also proposes a standard core of functional interfaces defined by unit suppliers and avionics primes in the context of Space AVionics Open Interface aRchitecture (SAVOIR) initiative.
When viewed from the perspective of a specific project context, the requirements defined in this Standard should be tailored to match the genuine requirements of a particular profile and circumstances of a project.
This standard may be tailored for the specific characteristics and constraints of a space project in conformance with ECSS-S-ST-00.
- Standard88 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies the technical delivery requirements for seamless and welded butt welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of carbon and alloy steel in two test categories which are intended for pressure purposes at room temperature, at low temperature or at elevated temperatures, and for the transmission and distribution of fluids and gases.
It specifies:
a) type of fittings;
type A: Butt-welding fittings with reduced pressure factor;
type B: Butt-welding fittings for use at full service pressure;
b) steel grades and their chemical compositions;
c) mechanical properties;
d) dimensions and tolerances;
e) requirements for inspection and testing;
f) inspection documents;
g) marking;
h) protection and packaging.
NOTE The selection of the appropriate fitting (material, thickness) is the ultimate responsibility of the manufacturer of the pressure equipment (see European Legislation for Pressure Equipment). In the case of a harmonized supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific item of equipment. Consequently, it is essential that the technical data stated in the material standard be assessed against the design requirements of this specific item of equipment to verify that the ESRs of the PED are satisfied.
- Standard145 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft149 pagesEnglish languagesale 10% offe-Library read for×1 day
This document covers the different types of weaving and knitting machines defined in ISO 5247 (all parts)[2] and ISO 7839[3], respectively.
It is applicable to:
full-width weaving machines with weft insertion by:
shuttles;
rigid, telescopic or flexible rapiers;
projectiles;
hydraulic (waterjet) or by pneumatic (airjet) nozzle;
narrow fabric weaving machines with weft insertion by shuttles or needles;
jacquard machines;
knitting machinery including:
circular knitting;
flat bed knitting;
warp knitting;
raschel;
cotton (flat weft weaving);
other fabric manufacturing machines e.g.:
multi-phase weaving machines;
circular weaving machines;
stitch bonding machines.
NOTE Because of the high requirements on measurement conditions, grade 1 methods are normally not feasible for textile machinery.
- Standard23 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies the significant hazards, hazardous situations and events, common to self-propelled road-rail machines - henceforward referred to as machines - and associated equipment, arising due to the adaptation for their use on railway networks and urban rail networks. These machines are intended for construction, maintenance and inspection of the railway infrastructure, shunting and emergency rescue vehicles, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer; see Clause 4.
This document deals with the common hazards during assembly and installation, commissioning, travelling on and off track, use including setting, programming, and process changeover, operation, cleaning, fault finding, maintenance and de-commissioning of the machines.
NOTE Specific measures for exceptional circumstances are not dealt with in this document. They can be subject to negotiation between manufacturer and the machine operator.
The common hazards dealt with include the general hazards presented by the machines, also the hazards presented by the following specific machine functions:
a) excavation;
b) ballast tamping, ballast cleaning, ballast regulating, ballast consolidating;
c) track construction, renewal, maintenance and repair;
d) lifting;
e) overhead contact line system renewal / maintenance;
f) maintenance of the components of the infrastructure;
g) inspection and measurement of the components of the infrastructure;
h) working in tunnels;
i) shunting;
j) vegetation control;
k) emergency rescue and recovery;
during commissioning, use, maintenance and servicing.
For a road-rail machine it is assumed that an EU road permissible host vehicle will offer an accepted safety level for its designed basic functions before conversion. Unless explicitly stated otherwise in a particular clause this specific aspect is not dealt with in this document.
This document does not deal with:
1) requirements with regard to the quality of work and the performance of the machine;
2) machines that utilize the contact line system for traction purposes;
3) specific requirements established by a railway Infrastructure Manager or Urban Rail Manager;
4) negotiations between the manufacturer and the machine operator for additional or alternative requirements;
5) requirements for use and travel of the machine on public highway;
6) hazards due to air pressure caused by the passing of high-speed trains at more than 190 km/h;
7) requirements which could be necessary in case of use in extreme conditions, such as extreme ambient temperatures (tropical or polar); see 5.30;
8) highly corrosive or contaminating environment, e.g. due to the presence of chemicals;
9) potentially explosive atmospheres.
Other special machines used on railway tracks are dealt with in other European Standards, see Annex E.
- Standard86 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft79 pagesEnglish languagesale 10% offe-Library read for×1 day
This European Standard is applicable to entertainment audio earplugs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.
- Standard9 pagesEnglish languagesale 10% offe-Library read for×1 day
This European Standard is applicable to entertainment audio ear-muffs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.
- Standard9 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies minimum requirements for design, calculation, examinations and tests of hydraulic powered loader cranes and their mountings on vehicles or static foundations.
This document applies to loader cranes designed to be installed on:
- road vehicles, including trailers, with load carrying capability;
- tractors (road or agricultural), where only a towed trailer has capability to carry goods;
- demountable bodies to be carried by any of the above;
- other types of carriers (e.g. separate loaders, crawlers, rail vehicles, non-seagoing vessels);
- static foundations.
This document also applies to loader cranes equipped with special tools or interchangeable equipment (e.g. grapple, clamshell bucket, pallet clamp, etc.), as specified in the operator’s manual.
This document does not apply to loader cranes used on board sea going vessels or to articulated boom system cranes which are designed as total integral parts of special equipment such as forwarders.
The hazards covered by this document are identified in Clause 4.
This document does not cover hazards related to the lifting of persons.
NOTE The use of cranes for lifting of persons can be subject to specific national regulations.
This document is not applicable to loader cranes manufactured before the publication of this document. For loader cranes designed before the publication of this document, the provisions concerning stress calculations in the version of EN 12999 that was valid at the time of their design, are still applicable.
- Standard107 pagesEnglish languagesale 10% offe-Library read for×1 day
- 13-Oct-2020
- 53.020.20
- 2006/42/EC
- M/396
- CEN/TC 147
This document addresses good clinical practice for the design, conduct, recording and reporting of clinical investigations carried out in human subjects to assess the clinical performance or effectiveness and safety of medical devices.
For post-market clinical investigations, the principles set forth in this document are intended to be followed as far as relevant, considering the nature of the clinical investigation (see Annex I).
This document specifies general requirements intended to
— protect the rights, safety and well-being of human subjects,
— ensure the scientific conduct of the clinical investigation and the credibility of the clinical investigation results,
— define the responsibilities of the sponsor and principal investigator, and
— assist sponsors, investigators, ethics committees, regulatory authorities and other bodies involved in the conformity assessment of medical devices.
NOTE 1 Users of this document need to consider whether other standards and/or national requirements also apply to the investigational device(s) under consideration or the clinical investigation. If differences in requirements exist, the most stringent apply.
NOTE 2 For Software as a Medical Device (SaMD) demonstration of the analytical validity (the SaMD's output is accurate for a given input), and where appropriate, the scientific validity (the SaMD's output is associated to the intended clinical condition/physiological state), and clinical performance (the SaMD's output yields a clinically meaningful association to the target use) of the SaMD, the requirements of this document apply as far as relevant (see Reference [4]). Justifications for exemptions from this document can consider the uniqueness of indirect contact between subjects and the SaMD.
This document does not apply to in vitro diagnostic medical devices. However, there can be situations, dependent on the device and national or regional requirements, where users of this document might consider whether specific sections and/or requirements of this document could be applicable.
- Standard96 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.