EN ISO 18098:2022

Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation (ISO 18098:2022)

This document specifies the equipment and procedures for determining the apparent overall density and the apparent core density under reference conditions. It is applicable to full-size thermal insulating products and test specimens of preformed pipe insulation.

Wärmedämmstoffe für die Haustechnik und für betriebstechnische Anlagen - Bestimmung der Rohdichte von vorgeformten Rohrdämmstoffen (ISO 18098:2022)

Dieses Dokument legt die Prüfeinrichtungen und Verfahren zum Bestimmen der Rohdichte und der Kern Rohdichte unter definierten Prüfbedingungen fest. Es gilt für Wärmedämmstoffe in Liefermaßen und für Probekörper aus vorgeformten Rohrdämmstoffen.

Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Détermination de la masse volumique apparente des coquilles isolantes préformées (ISO 18098:2022)

Le présent document spécifie les équipements nécessaires et les procédures à suivre pour déterminer la masse volumique apparente totale et la masse volumique apparente à cœur dans des conditions de référence. Elle s’applique aux produits isolants thermiques en vraies dimensions et aux éprouvettes de coquille isolantes préformées.

Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije - Ugotavljanje volumske mase predoblikovanih cevnih izolacij (ISO 18098:2022)

Ta evropski standard določa opremo in postopke za ugotavljanje skupne volumske mase in volumske mase izvrtka pod referenčnimi pogoji. Uporablja se za toplotnoizolacijske proizvode in preskušance predoblikovanih cevnih izolacij v naravni velikosti.

General Information

• Status: Published
• Publication Date: 06-Sep-2022
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: CEN/TC 88 - Thermal insulating materials and products
• Drafting Committee: CEN/TC 88/WG 10 - Building equipment and industrial installations
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 07-Sep-2022
• Due Date: 08-Dec-2021
• Completion Date: 07-Sep-2022
• Ref Project: SIST EN ISO 18098:2022 - Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation (ISO 18098:2022)

Relations

• Replaces: EN 13470:2001 - Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation
• Effective Date: 14-Sep-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2022
Nadomešča:
SIST EN 13470:2002
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije -
Ugotavljanje volumske mase predoblikovanih cevnih izolacij (ISO 18098:2022)
Thermal insulating products for building equipment and industrial installations -
Determination of the apparent density of preformed pipe insulation (ISO 18098:2022)
Wärmedämmstoffe für die Haustechnik und für betriebstechnische Anlagen -
Bestimmung der Rohdichte von vorgeformten Rohrdämmstoffen (ISO 18098:2022)
Produits isolants thermiques pour l'équipement du bâtiment et les installations
industrielles - Détermination de la masse volumique apparente des coquilles isolantes
préformées (ISO 18098:2022)
Ta slovenski standard je istoveten z: EN ISO 18098:2022
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 18098
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2022
EUROPÄISCHE NORM
ICS 91.100.60 Supersedes EN 13470:2001
English Version
Thermal insulating products for building equipment and
industrial installations - Determination of the apparent
density of preformed pipe insulation (ISO 18098:2022)
Produits isolants thermiques pour l'équipement du Wärmedämmstoffe für die Haustechnik und für
bâtiment et les installations industrielles - betriebstechnische Anlagen - Bestimmung der
Détermination de la masse volumique apparente des Rohdichte von vorgeformten Rohrdämmstoffen (ISO
coquilles isolantes préformées (ISO 18098:2022) 18098:2022)
This European Standard was approved by CEN on 6 August 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18098:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 18098:2022) has been prepared by Technical Committee ISO/TC 163 "Thermal
performance and energy use in the built environment" in collaboration with Technical Committee
CEN/TC 88 “Thermal insulating materials and products” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2023, and conflicting national standards shall
be withdrawn at the latest by September 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13470:2001.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 18098:2022 has been approved by CEN as EN ISO 18098:2022 without any modification.

INTERNATIONAL ISO
STANDARD 18098
Second edition
2022-08
Thermal insulating products for
building equipment and industrial
installations — Determination of the
apparent density of preformed pipe
insulation
Produits isolants thermiques pour l'équipement du bâtiment et les
installations industrielles — Détermination de la masse volumique
apparente des coquilles isolantes préformées
Reference number
ISO 18098:2022(E)
ISO 18098:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 18098:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Test specimens . 2
6.1 Dimensions of test specimens . 2
6.2 Number of test specimens . 2
6.3 Preparation of test specimens . 2
6.4 Conditioning of test specimens . 2
7 Procedure .3
7.1 Test conditions . 3
7.2 Test procedure . 3
8 Calculation and expression of results . 3
9 Accuracy of measurement.4
10 Test report . 4
iii
ISO 18098:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO
...