EN 12385-4:2002+A1:2008
(Main)Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
This Part of this European Standard specifies the particular materials, manufacturing and testing requirements for
ropes for general lifting applications.
The particular hazards covered by this Part are identified in Clause 4.
This Part of this European Standard does not establish requirements for information for use other than those given
in clause 7 of Part 1. Neither does it cover the requirements for ropes fitted with terminations.
Minimum breaking force values for the more common classes, sizes and grades of rope are provided in tables 5 to
17.
Drahtseile aus Stahldraht - Sicherheit - Teil 4: Litzenseile für allgemeine Hebezwecke
Dieser Teil dieser Europäischen Norm legt die besonderen Anforderungen an Werkstoffe, Herstellung und Prüfung für Litzenseile für allgemeine Hebezwecke fest.
Die besonderen Gefährdungen, die in diesem Teil behandelt werden, sind in Abschnitt 4 angegeben.
Dieser Teil dieser Europäischen Norm legt über die Anforderungen in Teil 1, Abschnitt 7, hinausgehend keine weiteren Anforderungen an Anwendungshinweise fest. Er enthält auch keine Anforderungen an Seile mit Endverbindungen.
Mindestbruchkräfte für die gebräuchlicheren Seilklassen, Durchmesser und Seilfestigkeitsklassen sind in den Tabellen 5 bis 17 angegeben.
Câbles en acier - Sécurité - Partie 4: Câbles à torons pour applications de levage générales
La présente partie de cette Norme européenne spécifie les matériaux particuliers, les prescriptions pour la fabrication
et les essais des câbles toronnés pour les applications générales de levage.
Les phénomènes dangereux particuliers couverts par la présente partie sont identifiés à l’article 4.
La présente partie de cette Norme européenne ne donne pas de prescriptions relatives à l’information pour l’utilisation
autres que celles données à l’article 7 de la partie 1. Elle ne couvre pas non plus les prescriptions pour les câbles
munis de terminaisons.
Les valeurs de charges de rupture minimales pour les classes, les dimensions et les catégories de câble les plus
courantes sont fournies dans les Tableaux 5 à 17.
Jeklene žične vrvi - Varnost - 4. del: Pramenaste vrvi za splošne dvigalne namene
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applicationsCâbles en acier - Sécurité - Partie 4: Câbles à torons pour applications de levage généralesDrahtseile aus Stahldraht - Sicherheit - Teil 4: Litzenseile für allgemeine HebezweckeTa slovenski standard je istoveten z:EN 12385-4:2002+A1:2008SIST EN 12385-4:2003+A1:2008en,fr77.140.65ICS:SLOVENSKI
STANDARDSIST EN 12385-4:2003+A1:200801-junij-2008
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12385-4:2002+A1
March 2008 ICS 77.140.65 Supersedes EN 12385-4:2002 English Version
Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
Câbles en acier - Sécurité - Partie 4: Câbles à torons pour applications de levage générales
Drahtseile aus Stahldraht - Sicherheit - Teil 4: Litzenseile für allgemeine Hebezwecke This European Standard was approved by CEN on 12 November 2001, includes Amendment 1 approved by CEN on 14 February 2008 and includes Corrigendum 1 issued by CEN on 19 October 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12385-4:2002+A1:2008: E
page Foreword.3 Introduction.4 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Hazards.5 5 Safety requirements and/or measures.5 6 Verification of safety requirements and/or measures.8 7 Information for use.8 Annex A (normative) Calculation of minimum breaking force for those ropes covered by Tables 5 to 17.22 Annex B (normative) Summary of factors for calculations.23 Annex C (informative) Calculation of approximate nominal length mass of ropes over 60mm diameter.24 Annex D (informative) Information which should be provided with an enquiry or an order.25 Annex ZA (informative) !!!!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC.26 Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC.27 Bibliography.28
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Introduction This Part of this European Standard has been prepared to be a harmonized standard to provide one means of complying with the essential safety requirements of the Machinery Directive. This Part of this European Standard is a type C standard as stated in EN 292. For the purposes of the Certificate referred to in clause 7, this Part assumes a working load limit based on a safety factor of 5. The safety factor and the required minimum breaking force of the rope for a given application is the responsibility of the manufacturer of the machine of which the rope forms a part. During the preparation of this standard, it was assumed that a negotiation would take place between the purchaser and the manufacturer concerning the intended purpose of the rope. Although tables of breaking forces and masses are provided for a number of the more common classes, diameters and rope grades, this Part of this standard is not limited to those given, providing all of the other requirements are met. Specifiers, purchasers and users should recognise that some ropes are specially designed by the manufacturer to meet particular lifting machinery requirements.
1 Scope This Part of this European Standard specifies the particular materials, manufacturing and testing requirements for ropes for general lifting applications. The particular hazards covered by this Part are identified in Clause 4.
This Part of this European Standard does not establish requirements for information for use other than those given in clause 7 of Part 1. Neither does it cover the requirements for ropes fitted with terminations. Minimum breaking force values for the more common classes, sizes and grades of rope are provided in tables 5 to 17. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 10264-2, Steel wire and wire products – Steel wire for ropes – Part 2: Cold drawn non-alloyed steel wire for ropes for general applications.
EN 12385-1:2002, Steel wire ropes – Safety – Part 1: General requirements.
EN 12385-2:2002, Steel wire ropes – Safety – Part 2: Definitions, designation and classification.
ISO 4346, Steel wire ropes for general purposes – Lubricants – Basic requirements.
Table 1- Hazards and associated requirements Hazards identified in annex A of EN 1050:1996 Relevant clause of annex A of EN 292-2:1991/A1:1995 Relevant clause of this standard 27.4
27.6 Mechanical hazard from insufficient strength of parts
Mechanical hazard from inadequate selection of ropes and their inadequate integration into the machine
4.1.2.3
4.3.1 5 and 6
NOTE For the purposes of this Part of EN 12385, insufficient strength of parts means failure to achieve the minimum breaking force of the rope. 5 Safety requirements and/or measures 5.1 General In addition to the requirements given 5.2 to 5.5, the requirements shall also conform to those given in EN 12385-1.
5.2 Materials 5.2.1 Wire Wires, before ropemaking, shall conform to EN 10264-2.
For those ropes where a rope grade is applicable, e.g. Tables 5 to 16, the tensile strength grades of the wires shall be subject to the limits given in Table 2.
For those ropes where a rope grade is not applicable, e.g. large diameter ropes, the tensile strength grades of the wires shall be one or a combination of those given in EN 10264-2.
Table 2 — Wire tensile strength grades excluding centre and filler wires for given rope grades Rope Wire tensile strength grades N/mm2
Grade Minimum
Maximum
1770 1960 2160 1570 1770 1960 1960 2160 2160
a) fibre; b) steel, as an independent wire rope (IWRC) or wire strand (WSC); c) composite (e.g. steel and fibre or steel and solid polymer); d) cushion core; or e) solid polymer.
5.2.3 Lubricant The lubricant shall comply with ISO 4346.
5.3 Rope manufacture 5.3.1 Lubrication At least the strands shall be lubricated.
5.3.2 Construction The rope construction shall be either:
a) one of those covered by Tables 5 to 17; or b) another single layer or parallel-closed or rotation-resistant rope construction as specified by the manufacturer and covered by the respective classes in EN 12385-2.
5.3.3 Rope grade For rope sizes up to and including 60 mm diameter, the rope grade shall be 1770, 1960 or 2160 or an intermediate grade as specified by the manufacturer, but not exceeding 2160.
NOTE Ropes larger than 60mm diameter may not have a rope grade. 5.4 Diameter 5.4.1 Tolerances When measured in accordance with 6.3.1 of EN 12385-1:2002, the measured diameter shall not vary from the nominal diameter by more than the values given in Table 3. For ropes with diameters from 2 mm to 5 mm inclusive, the tolerance shall be rounded up to the nearest 0,05 mm.
Table 3 — Tolerances on rope diameter
Nominal rope diameter
mm Tolerance as percentage of nominal rope diameter From 2 to < 4 08+ From 4 to < 6 07+ From 6 to < 8 06+ 8 and greater 05+
5.4.2 Differences between diameter measurements The difference between any two of the four measurements taken in accordance with 6.3.1 of EN 12385-1:2002 and expressed as a percentage of the nominal rope diameter, shall not exceed the values given in Table 4.
Table 4 — Differences between diameter measurements
Difference between measurements as percentage of nominal rope diameter Nominal rope diameter
mm Rope with strands that are exclusively of wire or incorporate solid polymer Ropes with strands that incorporate
fibre centres From 2 to < 4 From 4 to < 6 From 6 to < 8 8 and greater 7 6 5 4 - 8 7 6
NOTE The values in the table apply irrespective of the type of core in the rope. 5.5 Breaking force The breaking force shall be specified only as minimum breaking force.
The values of minimum breaking force for the more common classes and grades of ropes shall be not less than those given in Tables 5 to 16. For intermediate rope diameters, the values shall be not less than those obtained using the formula in annex A with the factors given in annex B.
The values of minimum breaking force for large diameter ropes are given in Table 17. For intermediate rope diameters, the values shall be not less than those obtained using the formula in annex A.
NOTE
Refer to the definitions given in EN 12385-2 for derivation of the formula for calculation of minimum breaking force.
5.6 Designation and classification Rope designation and classification shall conform to EN 12385-2.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.