EN ISO 28399:2011
(Main)Dentistry - Products for external tooth bleaching (ISO 28399:2011)
Dentistry - Products for external tooth bleaching (ISO 28399:2011)
ISO 28399:2011 specifies requirements and test methods for external tooth bleaching products. These products are intended for use in the oral cavity, either by professional application (in-office tooth bleaching products) or consumer application (professional or non-professional home use of tooth bleaching products). It also specifies requirements for their packaging, labelling and instructions for use.
The following tooth bleaching products are not covered by ISO 28399:2011:
those intended to change colour perception of natural teeth by mechanical methods (e.g. stain removal) or using restorative approaches, such as veneers or crowns;
auxiliary or supplementary materials (e.g. tray materials) and instruments or devices (e.g. lights) that are used in conjunction with the bleaching products.
Zahnheilkunde - Externe Zahnbleichmittel (ISO 28399:2011)
Diese Internationale Norm legt Anforderungen an und Prüfverfahren für externe Zahnbleichmittel fest. Diese
Produkte sind zur Anwendung in der Mundhöhle vorgesehen, entweder durch eine professionelle Anwendung
(Zahnbleichmittel in der Zahnarztpraxis) oder durch den Verbraucher (professionelle oder nichtprofessionelle
häusliche Anwendung von Zahnbleichmitteln), oder beides. Sie legt auch Anforderungen an ihre Verpackung,
Kennzeichnung und Gebrauchsanweisung fest.
Diese Internationale Norm ist nicht anwendbar für folgende Zahnbleichmittel:
— die in ISO 11609 beschrieben sind;
— diejenigen, die dazu vorgesehen sind, die Farbwahrnehmung der natürlichen Zähne durch mechanische
Verfahren (z. B. Entfernung verfärbter Beläge) oder mithilfe restaurativer Verfahren, wie Veneers und Kronen
zu verändern;
— Hilfs- oder Zusatzmaterialien (z. B. Löffelmaterialien) sowie Instrumente oder Geräte (z. B. Lampen), die
zusammen mit den Bleichmitteln verwendet werden.
Diese Internationale Norm beschreibt nicht die biologische Sicherheit von Zahnbleichmitteln.
ANMERKUNG Die biologische Sicherheit eines Zahnbleichmittels kann unter Anwendung von ISO 10993-1 und
ISO 7405 bewertet werden.
Médecine bucco-dentaire - Produits d'éclaircissement dentaire, à usage externe (ISO 28399:2011)
L'ISO 28399:2011 spécifie les exigences et les méthodes d'essai relatives aux produits d'éclaircissement dentaire par voie externe destinés à être utilisés dans la cavité buccale, soit pour un usage professionnel (produits d'éclaircissement dentaire prévus pour une utilisation au cabinet dentaire) soit pour une application directe par le consommateur à domicile (produits d'éclaircissement dentaire prescrits par des professionnels ou disponibles dans le commerce). Elle spécifie également les exigences relatives à l'emballage et à l'étiquetage, y compris la notice d'utilisation.
L'ISO 28399:2011 ne traite pas des produits d'éclaircissement dentaire suivants:
ceux destinés à modifier la perception de la teinte des dents naturelles, soit par des moyens mécaniques (par exemple l'élimination des taches), soit à l'aide de techniques de restauration telles que les facettes prothétiques ou les couronnes;
les produits auxiliaires ou complémentaires (par exemple les porte-empreintes) et les instruments ou dispositifs (par exemple les sources de lumière) qui peuvent être utilisés conjointement avec les produits d'éclaircissement.
Zobozdravstvo - Izdelki za zunanje beljenje zob (ISO 28399:2011)
Ta mednarodni standard določa zahteve in preskusne metode za izdelke za zunanje beljenje zob. Ti izdelki so namenjeni uporabi v ustni odprtini ali s strokovnim nanosom (izdelki za beljenje zob v zobozdravstvu) ali z nanosom stranke (strokovna ali nestrokovna uporaba izdelkov za beljenje zob doma) ali oboje. Prav tako določa zahteve za njihovo pakiranje, opremljanje z nalepkami in navodili za uporabo. Ta mednarodni standard ne velja za naslednje izdelke za beljenje zob: – ki so določeni v ISO 11609; – ki so namenjeni spremembi barve zaznave naravnih zob z mehanskimi metodami (npr. odstranitev madežev) ali z uporabo obnovitvenih pristopov, kot so prevleke in krone, pomožni ali nadomestni materiali (npr. materiali za vložke) ter instrumenti ali naprave (npr. luči), ki se uporabljajo skupaj z izdelki za beljenje. Ta mednarodni standard ne določa vidikov biološke varnosti za izdelke za beljenje zob.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2011
Zobozdravstvo - Izdelki za zunanje beljenje zob (ISO 28399:2011)
Dentistry - Products for external tooth bleaching (ISO 28399:2011)
Zahnheilkunde - Äußere Zahnbleichmittel (ISO 28399:2011)
Art dentaire - Produits d'éclaircissement dentaire (ISO 28399:2011)
Ta slovenski standard je istoveten z: EN ISO 28399:2011
ICS:
11.060.01 Zobozdravstvo na splošno Dentistry in general
71.100.70 .R]PHWLND7RDOHWQL Cosmetics. Toiletries
SULSRPRþNL
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 28399
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2011
ICS 97.170
English Version
Dentistry - Products for external tooth bleaching (ISO
28399:2011)
Médecine bucco-dentaire - Produits d'éclaircissement Zahnheilkunde - Externe Zahnbleichmittel (ISO
dentaire, à usage externe (ISO 28399:2011) 28399:2011)
This European Standard was approved by CEN on 11 September 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28399:2011: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 28399:2011) has been prepared by Technical Committee ISO/TC 106 "Dentistry" in
collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2011, and conflicting national standards shall be withdrawn at the
latest by July 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 28399:2011 has been approved by CEN as a EN ISO 28399:2011 without any modification.
INTERNATIONAL ISO
STANDARD 28399
First edition
2011-01-15
Dentistry — Products for external tooth
bleaching
Médecine bucco-dentaire — Produits d'éclaircissement dentaire, à
usage externe
Reference number
ISO 28399:2011(E)
©
ISO 2011
ISO 28399:2011(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
ISO 28399:2011(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 Classification .2
4.1 General .2
4.2 Products for professional application.2
4.3 Products for consumer application.2
5 Requirements.2
5.1 Concentration of active ingredients for bleaching .2
5.2 Surface microhardness.2
5.3 Surface erosion .2
6 Test methods .3
6.1 Preparation of tooth specimens .3
6.2 Preparation and application of tooth bleaching product .3
6.3 Surface microhardness.3
7 Packaging, marking and information to be supplied by the manufacturer.3
7.1 General .3
7.2 Packaging.3
7.3 Marking and instructions for use.3
Annex A (informative) Test method for the measurement of hydrogen peroxide concentration.5
Annex B (informative) Test method for the measurement of erosion of enamel and dentine caused
by products for external tooth bleaching .6
Annex C (informative) Test method for laboratory assessment of tooth bleaching efficacy .10
Bibliography.13
ISO 28399:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 28399 was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 7, Oral care
products.
iv © ISO 2011 – All rights reserved
ISO 28399:2011(E)
Introduction
Products for external tooth bleaching are used in dentistry for changing the colour of natural teeth towards a
lighter or whiter shade. They are applied in the oral cavity directly on the outer surfaces of teeth. This
International Standard includes requirements and test methods for products intended for external bleaching of
natural teeth by chemical means.
INTERNATIONAL STANDARD ISO 28399:2011(E)
Dentistry — Products for external tooth bleaching
1 Scope
This International Standard specifies requirements and test methods for external tooth bleaching products.
These products are intended for use in the oral cavity, either by professional application (in-office tooth
bleaching products) or consumer application (professional or non-professional home use of tooth bleaching
products), or both. It also specifies requirements for their packaging, labelling and instructions for use.
This International Standard is not applicable to tooth bleaching products:
⎯ specified in ISO 11609;
⎯ those intended to change colour perception of natural teeth by mechanical methods (e.g. stain removal)
or using restorative approaches, such as veneers or crowns;
⎯ auxiliary or supplementary materials (e.g. tray materials) and instruments or devices (e.g. lights) that are
used in conjunction with the bleaching products.
This International Standard does not specify biological safety aspects of tooth bleaching products.
NOTE A tooth bleaching product can be evaluated for its biological safety using ISO 10993-1 and ISO 7405.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 1942:2009 Dentistry — Vocabulary
ISO 6344-1, Coated abrasives — Grain size analysis — Part 1: Grain size distribution test
ISO 8601, Data elements and interchange formats — Information interchange — Representation of dates and
times
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 1942 and the following apply.
3.1
bleaching
〈natural teeth〉 removal of intrinsic or acquired discolorations of natural teeth through the use of chemicals,
sometimes in combination with the application of auxiliary means
NOTE Adapted from ISO 1942:2009, 2.28.
ISO 28399:2011(E)
3.2
professional home use
〈of a product〉 use prescribed by a professional and for use at home under the repeated supervision of the
dentist
4 Classification
4.1 General
Products for external tooth bleaching can be classified for either:
a) professional application; or
b) consumer application.
NOTE Products for external tooth bleaching can be used alone or in conjunction with auxiliary means of application.
4.2 Products
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.