EN ISO 22610:2006

Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Test method to determine the resistance to wet bacterial penetration (ISO 22610:2006)

ISO 22610:2006 specifies a test method, with associated test apparatus, which is used to determine the resistance of a material to the penetration of bacteria, carried by a liquid, when subjected to mechanical rubbing.

Operationsabdecktücher, -mäntel und Rein-Luft-Kleidung zur Verwendung als Medizinprodukte für Patienten, Klinikpersonal und Geräte - Prüfverfahren für die Widerstandsfähigkeit gegen Keimdurchtritt im feuchten Zustand (ISO 22610:2006)

Diese Internationale Norm legt ein Prüfverfahren mit der dazugehörigen Ausrüstung fest (siehe Anhang A), das für die Bestimmung der Widerstandsfähigkeit eines Materials gegen den Durchtritt von durch Flüssigkeit übertragende Bakterien verwendet wird, während das Material mechanischem Reiben oder mechanischer Belastung ausgesetzt wird.

Champs chirurgicaux, casaques et tenues de bloc, utilisés en tant que dispositifs médicaux, pour les patients, le personnel et les équipements - Méthode d'essai de résistance à la pénétration de la barrière bactérienne à l'état humide (ISO 22610:2006)

L'ISO 22610:2006 spécifie une méthode d'essai ainsi que l'équipement associé susceptibles d'être utilisés pour déterminer la résistance d'un matériau à la pénétration de bactéries dans un liquide lorsque ce matériau est soumis à un frottement mécanique.

Kirurške zastirke, ogrinjala in garniture za čisti zrak, ki se uporabljajo kot medicinski pripomočki za paciente, zdravstveno osebje in opremo – Preskusne metode za določanje odpornosti proti prodiranju vlažnih bakterij (ISO 22610:2006)

General Information

• Status: Published
• Publication Date: 30-Jun-2006
• Withdrawal Date: 30-Jan-2007
• ICS: 13.340.10 - Protective clothing
• Technical Committee: CEN/TC 205 - Non-active medical devices
• Drafting Committee: CEN/TC 205/WG 14 - Surgical clothing and drapes used as medical devices in health care facilities - Performance requirements and test methods
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Start Date: 07-Aug-2008
• Completion Date: 07-Aug-2008
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Mandate: M/295 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
• Ref Project: SIST EN ISO 22610:2006 - Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Test method to determine the resistance to wet bacterial penetration (ISO 22610:2006)

Relations

• Revised: prEN ISO 22610 - Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Test method to determine the resistance to wet bacterial penetration (ISO/AWI 22610:2008)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2006
.LUXUãNH]DVWLUNHRJULQMDODLQJDUQLWXUH]DþLVWL]UDNNLVHXSRUDEOMDMRNRW
PHGLFLQVNLSULSRPRþNL]DSDFLHQWH]GUDYVWYHQRRVHEMHLQRSUHPR±3UHVNXVQH
PHWRGH]DGRORþDQMHRGSRUQRVWLSURWLSURGLUDQMXYODåQLKEDNWHULM,62
Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical
staff and equipment - Test method to determine the resistance to wet bacterial
penetration (ISO 22610:2006)
Operationsabdecktücher, -mäntel und Rein-Luft-Kleidung zur Verwendung als
Medizinprodukte für Patienten, Klinikpersonal und Geräte - Prüfverfahren für die
Widerstandsfähigkeit gegen Keimdurchtritt im feuchten Zustand (ISO 22610:2006)
Champs chirurgicaux, casaques et tenues de bloc, utilisés en tant que dispositifs
médicaux, pour les patients, le personnel et les équipements - Méthode d'essai de
résistance a la pénétration de la barriere bactérienne a l'état humide (ISO 22610:2006)
Ta slovenski standard je istoveten z: EN ISO 22610:2006
ICS:
11.140 Oprema bolnišnic Hospital equipment
13.340.10 Varovalna obleka Protective clothing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 22610
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2006
ICS 13.340.10
English Version
Surgical drapes, gowns and clean air suits, used as medical
devices, for patients, clinical staff and equipment - Test method
to determine the resistance to wet bacterial penetration (ISO
22610:2006)
Champs chirurgicaux, casaques et tenues de bloc, utilisés Operationsabdecktücher, -mäntel und Rein-Luft-Kleidung,
en tant que dispositifs médicaux, pour les patients, le zur Verwendung als Medizinprodukte, für Patienten,
personnel et les équipements - Méthode d'essai de Klinikpersonal und Geräte - Prüfverfahren für die
résistance à la pénétration de la barrière bactérienne à Widerstandsfähigkeit gegen Keimdurchtritt im feuchten
l'état humide (ISO 22610:2006) Zustand (ISO 22610:2006)
This European Standard was approved by CEN on 24 May 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22610:2006: E
worldwide for CEN national Members.

Foreword
This document (EN ISO 22610:2006) has been prepared by Technical Committee CEN/TC 205
"Non-active medical devices", the secretariat of which is held by DIN, in collaboration with
Technical Committee ISO/TC 94 "Personal safety - Protective clothing and equipment".

This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2007, and conflicting national standards
shall be withdrawn at the latest by January 2007.

This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).

For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

ANNEX ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 93/42/EEC

This European Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association to provide a means of conforming to
Essential Requirements of the New Approach Directive 93/42/EEC.

Once this standard is cited in the Official Journal of the European Communities under that Directive
and has been implemented as a national standard in at least one Member State, compliance with
the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of
this standard, a presumption of conformity with the corresponding Essential Requirements of that
Directive and associated EFTA regulations.

Table ZA.1 — Correspondence between this European Standard and Directive 93/42/EEC

Clauses/subclause(s) of Essential requirements (ERs) Qualifying remarks/Notes
this European Standard
of EU Directive 93/42/EEC
4, 5, 6, 7, 8, 9 3, 4, 7 ISO 22610 is intended to be used
in conjunction with EN 13795-1, EN
13795-2 and prEN 13795-3
5, 6, 7, 8 8
5, 6, 7 9
WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.

INTERNATIONAL ISO
STANDARD 22610
First edition
2006-07-01
Surgical drapes, gowns and clean air
suits, used as medical devices, for
patients, clinical staff and equipment —
Test method to determine the resistance
to wet bacterial penetration
Champs chirurgicaux, casaques et tenues de bloc, utilisés en tant que
dispositifs médicaux, pour les patients, le personnel et les
équipements — Méthode d'essai de résistance à la pénétration de la
barrière bactérienne à l'état humide

Reference number
ISO 22610:2006(E)
©
ISO 2006
ISO 22610:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved

ISO 22610:2006(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 Principle. 2
5 Reagents and materials . 3
6 Apparatus . 3
7 Preparation of test samples and pieces. 3
7.1 Agar plates . 3
7.2 Carrier material . 4
7.3 Test specimen . 4
8 Procedure . 4
8.1 Preparation of donor . 4
8.2 Conditioning. 4
8.3 Test set-up. 4
8.4 Application of materials . 4
8.5 Test. 5
9 Test report . 5
10 Performance monitoring . 6
10.1 General. 6
10.2 With carbon paper . 6
10.3 With reference material . 6
Annex A (normative) Apparatus for testing resistance to wet bacterial penetration. 7
Annex B (normative) Nutrient media. 10
Annex C (informative) Examples of how to use the test results to characterize a barrier material . 12
Bibliography . 14

ISO 22610:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 22610 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 205, Non-active medical devices, in collaboration with Technical Committee ISO/TC 94, Personal
safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
iv © ISO 2006 – All rights reserved

ISO 22610:2006(E)
Introduction
There are numerous examples of situations where bacteria carried by a liquid may migrate throug
...