prEN ISO 14268
(Main)Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO/DIS 14268:2021)
Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO/DIS 14268:2021)
Leder - Physikalische und mechanische Prüfungen - Bestimmung der Wasserdampfdurchlässigkeit (ISO/DIS 14268:2021)
Diese Internationale Norm legt ein Verfahren zur Bestimmung der Wasserdampfdurchlässigkeit von Leder fest und gibt alternative Verfahren für die Probenvorbereitung und für das Messverfahren an.
Cuir - Essais physiques et mécaniques - Détermination de la perméabilité à la vapeur d'eau (ISO/DIS 14268:2021)
Usnje - Fizikalni in mehanski preskusi - Ugotavljanje prepustnosti vodne pare (ISO/DIS 14268:2021)
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN ISO 14268:2021
01-november-2021
Usnje - Fizikalni in mehanski preskusi - Ugotavljanje prepustnosti vodne pare
(ISO/DIS 14268:2021)
Leather - Physical and mechanical tests - Determination of water vapour permeability
(ISO/DIS 14268:2021)Leder - Physikalische und mechanische Prüfungen - Bestimmung der
Wasserdampfdurchlässigkeit (ISO/DIS 14268:2021)
Cuir - Essais physiques et mécaniques - Détermination de la perméabilité à la vapeur
d'eau (ISO/DIS 14268:2021)Ta slovenski standard je istoveten z: prEN ISO 14268
ICS:
59.140.30 Usnje in krzno Leather and furs
oSIST prEN ISO 14268:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN ISO 14268:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO 14268:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14268
IULTCS
IUP 15
IULTCS Secretariat: ISO
Voting begins on: Voting terminates on:
2021-09-30 2021-12-23
Leather — Physical and mechanical tests — Determination
of water vapour permeability
Cuir — Essais physiques et mécaniques — Détermination de la perméabilité à la vapeur d'eau
ICS: 59.140.30THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference numbers
NATIONAL REGULATIONS.
ISO/DIS 14268:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
IULTCS/IUP 15:2021(E)
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO 14268:2021
ISO/DIS 14268:2021(E)
IULTCS/IUP 15:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 14268:2021
ISO/DIS 14268:2021(E)
IULTCS/IUP 15:2021(E)
Contents Page
Foreword ........................................................................................................................................................................................................................................iv
Introduction ..................................................................................................................................................................................................................................v
1 Scope ................................................................................................................................................................................................................................. 1
2 Normative references ...................................................................................................................................................................................... 1
3 Terms and definitions ..................................................................................................................................................................................... 1
4 Principle ........................................................................................................................................................................................................................ 1
5 Apparatus ..................................................................................................................................................................................................................... 1
6 Sampling and sample preparation .................................................................................................................................................... 3
7 Procedure A – Standard test method ............................................................................................................................................... 3
8 Procedure B – Accelerated test method ........................................................................................................................................ 4
9 Expression of results ........................................................................................................................................................................................ 4
10 Test report ................................................................................................................................................................................................................... 5
Annex A (informative) Sources of apparatus ............................................................................................................................................... 6
Annex B (informative) Water vapour number ............................................................................................................................................ 7
Bibliography ................................................................................................................................................................................................................................ 8
© ISO 2021 – All rights reserved iii---------------------- Page: 5 ----------------------
oSIST prEN ISO 14268:2021
ISO/DIS 14268:2021(E)
IULTCS/IUP 15:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14268 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 289, Leather, in collaboration with the Physical Tests Commission of the International Union
of Leather Technologists and Chemists Societies (IUP Commission, IULTCS), in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).IULTCS, originally formed in 1897, is a worldwide organization of professional leather societies to
further the advancement of leather science and technology. IULTCS has three Commissions, which
are responsible for establishing international methods for the sampling and testing of leather. ISO
recognizes IULTCS as an international standardizing body for the preparation of test methods for
leather.The first edition was based on IUP 15 originally published in J. Soc. Leather Trades Chemists, 44, p. 502,
(1960) and declared an official method of the IULTCS in 1961. An updated version was published in
J. Soc. Leather Tech. Chem., 82, p. 234, (1998) and a further revision published in J. Soc. Leather Tech.
Chem., 84, p. 353, (2000) and reconfirmed as an official method in March 2001.This third edition cancels and replaces the second edition (ISO 14268:2012), which has been technically
revised.The main changes compared to the previous edition are as follows:
— Introduction included;
— additional clause 3, Terms and definitions;
— additional clause 8 for the new Procedure B – Accelerated test method.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.iv © ISO 2021 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 14268:2021
ISO/DIS 14268:2021(E)
IULTCS/IUP 15:2021(E)
Introduction
ISO 14268 describes two methods (Procedure A and Procedure B) for the water vapour permeability
determination.— The method in accordance with Procedure A is the standard test method for water vapour
permeability determination and to be used in any case of discrepancy or dispute.[1]
— The method in accordance with Procedure B is equivalent to the method described in ISO 20344
and can be applied for an accelerated routine control in production processes and/or if requested
by the client.© ISO 2021 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO 14268:2021
---------------------- Page: 8 ----------------------
oSIST prEN ISO 14268:2021
ISO/DIS 14268:2021(E)
DRAFT INTERNATIONAL STANDARD
IULTCS/IUP 15:2021(E)
Leather — Physical and mechanical tests — Determination
of water vapour permeability
1 Scope
This International Standard describes a method for determining the water vapour permeability of
leather and provides alternative methods of sample preparation and for the measurement procedure.
2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.ISO 2418, Leather — Chemical, physical and mechanical and fastness tests — Sampling location
ISO 2419, Leather — Physical and mechanical tests — Sample preparation and conditioning
ISO 2589, Leather — Physical and mechanical tests — Determination of thicknessISO 5402-1, Leather — Determination of flex resistance — Part 1: Flexometer method
3 Terms and definitionsNo terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp— IEC Electropedia: available at https:// www .electropedia .org/
4 Principle
The test piece is clamped over the opening of a container which contains a solid desiccant and is placed
in a strong current of air in a standard atmosphere. The air inside the contain...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.