prEN 601
(Main)Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff
Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff
This document specifies the maximum mass content of alloying elements and impurities in aluminium and aluminium alloy cast materials and articles designed to be in contact with foodstuff. It contains provisions for the demonstration of conformity of products with the present document.
NOTE Materials include ingots and liquid metal. Articles are finished goods.
Aluminium und Aluminiumlegierungen - Gussstücke - Chemische Zusammensetzung von Gussstücken, die in Kontakt mit Lebensmitteln kommen
Dieses Dokument legt den maximalen Massenanteil an Legierungselementen und Verunreinigungen in Aluminium und Aluminium-Gusslegierungen fest, die zur Herstellung von Erzeugnissen bestimmt sind, die in Kontakt mit Lebensmitteln kommen. Es enthält Festlegungen für den Nachweis der Übereinstimmung von Erzeugnissen mit diesem Dokument.
ANMERKUNG Gusslegierungen gibt es als Masseln und Flüssigmetall. Erzeugnisse sind Fertigwaren.
Aluminium et alliages d’aluminium - Pièces moulées - Composition chimique des pièces moulées destinées à entrer en contact avec les denrées alimentaires
Le présent document spécifie les teneurs maximales en d’éléments d’alliage et en impuretés présents dans les matériaux et articles en aluminium et alliages d’aluminium de moulage destinés à entrer en contact avec les denrées alimentaires. Il contient des dispositions pour la démonstration de la conformité des produits au présent document.
NOTE Les lingots et le métal liquide font partie des matériaux. Les articles sont des produits finis.
Aluminij in aluminijeve zlitine - Ulitki - Kemična sestava ulitkov, ki se uporabljajo v stiku z živili
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2025
Aluminij in aluminijeve zlitine - Ulitki - Kemična sestava ulitkov, ki se uporabljajo v
stiku z živili
Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in
contact with foodstuff
Aluminium und Aluminiumlegierungen - Gussstücke - Chemische Zusammensetzung
von Gussstücken, die in Kontakt mit Lebensmitteln kommen
Aluminium et alliages d’aluminium - Pièces moulées - Composition chimique des pièces
moulées destinées à entrer en contact avec les denrées alimentaires
Ta slovenski standard je istoveten z: prEN 601
ICS:
67.250 Materiali in predmeti v stiku z Materials and articles in
živili contact with foodstuffs
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2025
ICS 67.250; 77.150.10 Will supersede EN 601:2004
English Version
Aluminium and aluminium alloys - Castings - Chemical
composition of castings for use in contact with foodstuff
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 132.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 601:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Maximum permissible content of elements for foodstuff application . 5
4.1 Cast aluminium . 5
4.2 Cast aluminium alloys . 5
5 Selection of cast aluminium and aluminium alloys . 6
6 Demonstration of compliance . 6
Bibliography . 8
European foreword
This document (prEN 601:2025) has been prepared by Technical Committee CEN/TC 132 “Aluminium
and aluminium alloys”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 601:2004.
EN 601:2025 includes the following significant technical changes with respect to EN 601:2004:
— Addition of bismuth element limitation in Table 2;
— Deletion of nickel, antimony, strontium element limitations from Table 2;
— Informative reference to European Parliament and Council Directive 94/62/EC of 20 December 1994
and its amendment from 2018 on packaging and packaging waste;
— Addition of a Bibliography.
1 Scope
This document specifies the maximum mass content of alloying elements and impurities in aluminium
and aluminium alloy cast materials and articles designed to be in contact with foodstuff. It contains
provisions for the demonstration of conformity of products with the present document.
NOTE Materials include ingots and liquid metal. Articles are finished goods.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1706, Aluminium and aluminium alloys — Castings — Chemical composition and mechanical properties
EN 10204, Metallic products - Types of inspection documents
EN 12258-1, Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 12258-1 and the following apply.
ISO and IEC maintain terminology databases for use in s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.