EN 388:2016

Protective gloves against mechanical risks

This European Standard specifies requirements, test methods, marking and information to be supplied for protective gloves against the mechanical risks of abrasion, blade cut, tear, puncture and, if applicable, impact.
This standard is intended to be used in conjunction with EN 420.
The test methods developed in this standard may also be applicable to arm protectors.

Schutzhandschuhe gegen mechanische Risiken

Diese Europäische Norm legt Anforderungen, Prüfverfahren, Kennzeichnung und Herstellerinformationen für Schutzhandschuhe gegen die mechanischen Risiken Abrieb, Schnitt, Weiterreißen, Durchstich und, falls zutreffend, Stoß fest.
Diese Norm ist für die Anwendung in Verbindung mit EN 420 vorgesehen.
Die in dieser Norm angegebenen Prüfverfahren dürfen auch auf Armprotektoren angewendet werden.

Gants de protection contre les risques mécaniques

La présente Norme européenne indique les exigences, méthodes d’essai, marquages et informations à fournir pour les gants de protection contre les agressions mécaniques par abrasion, coupure par tranchage, déchirure, perforation et choc.
La présente norme doit être utilisée conjointement avec l'EN 420.
Les méthodes d’essai développées dans la présente norme peuvent également s’appliquer aux manchettes qui sont des dispositifs protecteurs séparés du gant ou des vêtements.

Rokavice za zaščito pred mehanskimi tveganji

Ta evropski standard določa zahteve in preskusne metode za rokavice za zaščito pred mehanskimi nevarnostmi.

General Information

• Status: Withdrawn
• Publication Date: 01-Nov-2016
• Withdrawal Date: 11-Dec-2018
• ICS: 13.340.40 - Hand and arm protection
• Technical Committee: CEN/TC 162 - Protective clothing including hand and arm protection and lifejackets
• Drafting Committee: CEN/TC 162/WG 8 - Protective gloves
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 12-Dec-2018
• Directive: 2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Ref Project: SIST EN 388:2016 - Protective gloves against mechanical risks

Relations

• Replaces: EN 388:2003 - Protective gloves against mechanical risks
• Effective Date: 09-Nov-2016
• Merged Into: EN 388:2016+A1:2018 - Protective gloves against mechanical risks
• Effective Date: 17-Oct-2018
• Amended By: EN 388:2016/prA1:2018 - Protective gloves against mechanical risks
• Effective Date: 16-Aug-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 388:2016
01-december-2016
1DGRPHãþD
SIST EN 388:2003
5RNDYLFH]D]DãþLWRSUHGPHKDQVNLPLWYHJDQML
Protective gloves against mechanical risks
Schutzhandschuhe gegen mechanische Risiken
Gants de protection contre les risques mécaniques
Ta slovenski standard je istoveten z: EN 388:2016
ICS:
13.340.40 Varovanje dlani in rok Hand and arm protection
SIST EN 388:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 388:2016

---------------------- Page: 2 ----------------------

SIST EN 388:2016


EN 388
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2016
EUROPÄISCHE NORM
ICS 13.340.40 Supersedes EN 388:2003
English Version

Protective gloves against mechanical risks
Gants de protection contre les risques mécaniques Schutzhandschuhe gegen mechanische Risiken
This European Standard was approved by CEN on 29 July 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 388:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 388:2016
EN 388:2016 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 6
4.1 General . 6
4.2 Additional Protection . 7
4.2.1 General . 7
4.2.2 Impact protection. 7
5 Sampling and conditioning . 7
6 Test methods . 8
6.1 Abrasion resistance . 8
6.1.1 Principle . 8
6.1.2 Consumables . 8
6.1.3 Apparatus .
...