Algae and algae products - Methods of sampling and analysis - Determination of total lipids content using the Ryckebosch-Foubert method

This document specifies a laboratory method for the determination of the total lipid content in micro- and macroalgae by the Ryckebosch-Foubert method.

Algen und algenbasierte Produkte oder Zwischenprodukte - Verfahren zur Probenahme und Analyse - Bestimmung von Gesamtlipiden mit der Ryckebosch-Foubert-Methode

Dieses Dokument legt ein Laborverfahren zur Bestimmung des Gesamtlipidgehalts in Mikro- und Makroalgen mit der Ryckebosch-Foubert-Methode fest.

Algues et produits d'algues - Méthodes d'échantillonnage et d'analyse - Détermination de la teneur en lipides totaux à l'aide de la méthode de Ryckebosch-Foubert

Le présent document spécifie une méthode de laboratoire permettant de déterminer la teneur en lipides totaux des micro- et macroalgues par la méthode de Ryckebosch-Foubert.

Alge in izdelki iz alg - Metode vzorčenja in analize - Določevanje skupnih lipidov z metodo Ryckebosch-Foubert

Ta dokument določa laboratorijsko metodo za ugotavljanje skupnih lipidov v mirko- in makroalgah z metodo Ryckebosch-Foubert.

General Information

Status
Published
Publication Date
05-Dec-2023
Withdrawal Date
24-Jan-2023
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
06-Dec-2023
Due Date
30-Aug-2022
Completion Date
06-Dec-2023

Buy Standard

Standard
EN 17908:2024
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2024
Alge in izdelki iz alg - Metode vzorčenja in analize - Določevanje skupnih lipidov z
metodo Ryckebosch-Foubert
Algae and algae products - Methods of sampling and analysis - Determination of total
lipids content using the Ryckebosch-Foubert method
Algen und algenbasierte Produkte oder Zwischenprodukte - Methoden zur
Probeentnahme und Analyse - Bestimmung von Gesamtlipiden mit der Ryckebosch-
Foubert Methode
Algues et produits à base d'algues - Méthodes d'échantillonnage et d'analyse -
Détermination de la teneur en lipides totaux à l'aide de la méthode de Ryckebosch-
Foubert
Ta slovenski standard je istoveten z: EN 17908:2023
ICS:
13.020.55 Biološki izdelki Biobased products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 17908
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2023
EUROPÄISCHE NORM
ICS 13.020.55
English Version
Algae and algae products - Methods of sampling and
analysis - Determination of total lipids content using the
Ryckebosch-Foubert method
Algues et produits d'algues - Méthodes Algen und algenbasierte Produkte oder
d'échantillonnage et d'analyse - Détermination de la Zwischenprodukte - Verfahren zur Probenahme und
teneur en lipides totaux à l'aide de la méthode de Analyse - Bestimmung von Gesamtlipiden mit der
Ryckebosch-Foubert Ryckebosch-Foubert-Methode
This European Standard was approved by CEN on 6 November 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17908:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus . 5
6 Reagents and materials . 6
7 Sampling and sample handling . 6
8 Procedure. 7
8.1 General . 7
8.2 Procedure without cell disruption . 7
8.2.1 General . 7
8.2.2 First extraction . 7
8.2.3 Second extraction . 8
8.3 Procedure with cell disruption . 9
8.3.1 General . 9
8.3.2 First extraction . 9
8.3.3 Second extraction .10
9 Calculations .12
10 Quality control .12
10.1 General .12
10.2 Interlaboratory reproducibility .12
11 Test report .13
Annex A (informative) Results of Interlaboratory Trial and Round Robin .14
A.1 Introduction .14
A.2 Results of the Interlaboratory Trial .14
A.3 Results of the Round Robin .17
Annex B (informative) Explanation of the use of chloroform .19
B.1 Introduction .19
B.2 Possible replacement of chloroform by dichloromethane .19
Bibliography .20
European foreword
This document (EN 17908:2023) has been prepared by Technical Committee CEN/TC 454 “Algae and
algae products”, the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2024, and conflicting national standards shall be
withdrawn at the latest by June 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
Introduction
General
The European Committee for Standardization (CEN) was requested by the European Commission (EC) to
draft European standards or European standardization deliverables to support the implementation of
Article 3 of Directive 2009/28/EC for algae and algae-based products or intermediates.
This request, presented as Mandate M/547 , also contributes to the Communication on “Innovating for
Sustainable Growth: A Bio Economy for Europe”.
The former working group CEN Technical Board Working Group 218 “Algae”, was created in 2016 to
develop a work programme as part of this Mandate. The technical committee CEN/TC 454 'Algae and
algae products' was established to carry out the work programme that will prepare a series of standards.
The interest in algae and algae-based products or intermediates has increased significantly in Europe as
a valuable source including but not limited to, carbohydrates, proteins, lipids, and several pigments.
These materials are suitable for use in a wide range of applications from food and feed purposes to other
sectors, such as textiles, cosmetics, biopolymers, biofuel and fertilizer/biostimulants. Standardization
was identified as having an important role in promoting the use of algae and algae products.
The work of CEN/TC 454 should improve the reliability of the supply chain, thereby improving the
confidence of industry and consumers in algae, which include macroalgae, microalgae, cyanobacteria,
Labyrinthulomycetes, algae-based products or intermediates and will promote and support
commercialization of the European algae industry.
Considerations in relation to the method
There is an objective among the algae community to have an accepted standardized method for the
determination of total lipids in algae. There are other methods for the determination of total lipid content
currently utilized in specific areas, like food and feed, and non-food and non-feed applications, each one
producing consistent results when used in one laboratory, but many times not consistent between
different methods or laboratories.
The aim of this document is to define one suitable laboratory method of analysis for the determination of
total lipids in algae. This method could also be used as a reference method for the validation of other
applied methods. The Ryckebosch-Foubert method determines the total lipid content in micro- and
macroalgae. This method has a lower reproducibility when applied to algae with lower lipid content.

Available at https://ec.europa.eu/growth/tools-databases/mandates/index.cfm?fuseaction=refSearch.search#
1 Scope
This document specifies a laboratory method for the determination of the total lipid content in micro-
and macroalgae by the Ryckebosch-Foubert method.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 17399, Algae and algae products — Terms and definitions
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 17399 and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org/
3.1
total lipid content
all lipid substances extracted from the test portion under the operating conditions specified, expressed
in mg/gram relative to dry weight
4 Principle
The lipids in dried and homogenized algal biomass are extracted with chloroform/methanol (see
Annex B). Afterwards a counter extraction with water is performed to remove the non-lipids. Two
consecutive extractions of two phases each are performed, as has been optimized as described in
Annex A. After removal of the solvents, the amount of total lipids is determined gravimetrically.
5 Apparatus
5.1 Rotary evaporator, including a vacuum pump with an adjustable vacuum level
5.2 Centrifuge, at room temperature
5.3 Vortex
5.4 Analytical balance, with a readability of 0,01 mg
5.5 Bead beater (only in case procedure 8.3 is used)
Different bead beaters and/or different cells can lead to different results. Therefore, when using
procedure 8.3, the specifications of the bead beater and cell used shall be indicated in the report.
6 Reagents and materials
®2
6.1 Pyrex screw capped tubes, 10 ml (one unit per test portion) or comparable glassware ®
6.2 Pyrex screw capped tubes, 20 ml (one unit per test portion) or comparable glassware
6.3 Funnels, (one unit per test portion)
6.4 Filter paper of 180 μm, (one unit per test portion), e.g. of Whatman, type nr. 1
6.5 Pasteur pipette
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.