iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 474-10:1998

(Main)

Earth-moving machinery - Safety - Part 10: Requirements for trenchers

Earth-moving machinery - Safety - Part 10: Requirements for trenchers

This European Standard specifies additional requirements and/or exceptions from EN 474-1:1994 "Earth-moving machinery - Safety - Part 1: General requirements.  This European Standard applies to wheel and crawler trenchers defined in ISO 6165:1997 and gives additional requirements for attachments (see ISO 6016:1982) and for derived machinery.  This European Standard deals with all significant hazards pertinent to trenchers when they are used as intended and under the conditions foreseen by the manufacturer (see annex A of this European Standard and annex C of EN 474-1:1994). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.

Erdbaumaschinen - Sicherheit - Teil 10: Anforderungen für Grabenfräsen

Diese Europäische Norm legt zusätzliche Anforderungen und/oder Abweichungen von EN 474-1:1994" Erdbaumaschinen - Sicherheit - Teil 1: Allgemeine Anforderungen" fest. Diese Europäische Norm gilt für Grabenfräsen auf Rädern und Kettenlaufwerk, wie sie in ISO 6165: 1997 definiert sind, und beinhaltet zusätzliche Anforderungen für Arbeitsaurüstungen (siehe ISO 6016: 1982) und für artverwandte Maschinen.

Engins de terrassement - Sécurité - Partie 10: Exigences applicables aux trancheuses

La présente norme européenne spécifie des exigences complémentaires et/ou des exceptions à l'EN 474-1:1994: "Engins de terrassement - Sécurité - Partie 1: Exigences générales". La présente norme européenne s'applique aux trancheuses sur roues et sur chenilles telles que définies dans l'ISO 6165:1997, et fournit des exigences complémentaires pour les accessoires (voir l'ISO 6016:1982) et les machines dérivées. La présente norme européenne traite tous les phénomènes dangereux significatifs relatifs aux trancheuses lorsqu'elles sont utilisées normalement et dans les conditions prévues par le constructeur.

Earth-moving machinery - Safety - Part 10: Requirements for trenchers

General Information

Status
Withdrawn
Publication Date
17-Mar-1998
Withdrawal Date
28-Nov-2006
ICS
53.100 - Earth-moving machinery
Technical Committee
CEN/TC 151 - Construction equipment and building material machines - Safety
Drafting Committee
CEN/TC 151/WG 1 - Earth-moving machinery - Safety
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
29-Nov-2006
Completion Date
29-Nov-2006
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
Ref Project
SIST EN 474-10:2000 - Earth-moving machinery - Safety - Part 10: Requirements for trenchers

Relations

Replaced By
EN 474-10:2006 - Earth-moving machinery - Safety - Part 10: Requirements for trenchers
Effective Date
22-Dec-2008
Corrected By
EN 474-10:1998/AC:1998 - Earth-moving machinery - Safety - Part 10: Requirements for trenchers
Effective Date
22-Dec-2008

Buy Standard

EN 474-10:2000EN 474-10:2000
PreviousNext
Standard
EN 474-10:2000
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 474-10:2000
01-april-2000
Earth-moving machinery - Safety - Part 10: Requirements for trenchers
Earth-moving machinery - Safety - Part 10: Requirements for trenchers
Erdbaumaschinen - Sicherheit - Teil 10: Anforderungen für Grabenfräsen
Engins de terrassement - Sécurité - Partie 10: Exigences app
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 6165:2022(Main)
Earth-moving machinery - Basic types - Identification and vocabulary (ISO 6165:2022)
SIST EN ISO 6165:2022

This document provides vocabulary and an identification structure for classifying earth-moving machinery designed to perform the following operations:
—    excavation;
—    loading;
—    transportation;
—    drilling, spreading, compacting or trenching of earth, rock and other materials, during work, for example, on roads and dams, in quarries and mines and on building sites.
The purpose of this document is to provide a clear means to identify earth-moving machinery according to its function and design configurations which can include additional classifications according to its operating mass and control operator configuration.
Annex A provides a procedure based on the identification structure used by this document to classify the machinery and introduce detailed identifications consistent with the logic implied by the structure.
Annex B provides a hierarchy of the operator control configurations for earth-moving machinery.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19014-2:2022(Main)
Earth-moving machinery - Functional safety - Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system (ISO 19014-2:2022)
SIST EN ISO 19014-2:2022

This document specifies general principles for the development and evaluation of the machine performance level achieved (MPLa) of safety-control systems (SCS) using components powered by all energy sources (e.g. electronic, electrical, hydraulic, mechanical) used in earth-moving machinery and its equipment, as defined in ISO 6165.
The principles of this document apply to machine control systems (MCS) that control machine motion or mitigate a hazard; such systems are assessed for machine performance level required (MPLr) per ISO 19014-1 or ISO/TS 19014-5.
Excluded from the scope of this document are the following systems:
—    awareness systems that do not impact machine motion (e.g. cameras and radar detectors);
—    fire suppression systems, unless the activation of the system interferes with, or activates, another SCS.
Other systems or components whereby the operator would be aware of failure (e.g. windscreen wipers, head lights, etc.), or are primarily used to protect property, are excluded from this document. Audible warnings are excluded from the requirements of diagnostic coverage.
In addition, this document addresses the significant hazards as defined in ISO 12100 mitigated by the hardware components within the SCS.
This document is not applicable to EMM manufactured before the date of its publication.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-5:2022/AC:2022(Corrigendum)
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
SIST EN 474-5:2022/AC:2022

This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to hydraulic excavators when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for hydraulic excavators.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
The following significant and relevant hazards are not covered in this document:
—   Laser;
—   Lightning.
This document does not provide performance requirements for safety related functions of control system(s).
This document does not deal with towing of trailers.
This document does not deal with demolition machinery.
This document also deals with lifting operation application, shovel application, log application, grapple application, and magnetic plate application.
This document is not applicable to hydraulic excavators which are manufactured before the date of publication of this document by CEN.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-3:2022/AC:2022(Corrigendum)
Earth-moving machinery - Safety - Part 3: Requirements for loaders
SIST EN 474-3:2022/AC:2022

This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to loaders when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for loaders.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
This document does not provide performance requirements for safety related functions of control system(s).
The following significant and relevant hazards are not covered in this document:
—   Laser;
—   Lightning.
This document does not deal with towing of trailers.
This document does not deal with demolition machinery.
This part also deals with fork application, log handling application, single heavy object handling application and lifting operation application.
This document is not applicable to loaders which are manufactured before the date of publication of this document by CEN.
NOTE   For travelling on public roads, national traffic regulations apply (e.g. braking, steering, lighting, towing, etc.) until harmonized requirements are available.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-5:2022(Main)
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
SIST EN 474-5:2022

This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to hydraulic excavators when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for hydraulic excavators.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
The following significant and relevant hazards are not covered in this document:
—   Laser;
—   Lightning.
This document does not provide performance requirements for safety related functions of control system(s).
This document does not deal with towing of trailers.
This document does not deal with demolition machinery.
This document also deals with lifting operation application, shovel application, log application, grapple application, and magnetic plate application.
This document is not applicable to hydraulic excavators which are manufactured before the date of publication of this document by CEN.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-1:2022(Main)
Earth-moving machinery - Safety - Part 1: General requirements
SIST EN 474-1:2022

This document specifies the general safety requirements for earth-moving machinery, hereinafter also referred to as machines, described in EN ISO 6165:2012, except horizontal directional drills.
NOTE 1   Horizontal directional drills are covered by EN 16228 1 and EN 16228 3.
This document gives the common safety requirements for earth-moving machinery families (see EN ISO 6165:2012, 3.4) and is intended to be used in conjunction with relevant parts of EN 474-2 to EN 474-13. These machine specific parts (EN 474 2 to EN 474−13) do not repeat the requirements from EN 474 1:2022 but supplement or modify the requirements for the family in question.
NOTE 2   The requirements specified in this part of the standard are common to two or more families of earth- moving machinery.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
This document does not provide performance requirements for safety related functions of control system(s).
This document does not deal with towing of trailers.
This document does not deal with demolition machinery.
This document deals with significant hazards, hazardous situations and events relevant to earth-moving machinery, when used as intended and under conditions foreseen but also taking into account any reasonably foreseeable misuse thereof (see Annex A).
The following significant and relevant hazards are not covered in this document:
—   Laser;
—   Lightning.
This document specifies the appropriate technical measures to reduce risks arising from the significant hazards, hazardous situations and events during the whole foreseeable lifecycle of the machinery as described in EN ISO 12100:2010, 5.4.
This document is not applicable to earth-moving machinery which are manufactured before the date of publication of this document by CEN.
NOTE 3   For travelling on public roads, national traffic regulations apply (e.g. braking, steering, lighting, towing, etc.) until harmonized requirements are available.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    105 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-4:2022(Main)
Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders
SIST EN 474-4:2022

This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to backhoe loaders when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for backhoe loaders.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
This document does not provide performance requirements for safety related functions of control system(s).
This document does not deal with demolition machinery.
This document also deals with fork application, log handling application and lifting operation application.
This document is not applicable to backhoe loaders which are manufactured before the date of publication of this document by CEN.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-10:2022(Main)
Earth-moving machinery - Safety - Part 10: Requirements for trenchers
SIST EN 474-10:2022

This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to trenchers as defined in Clause 3 when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474-1:2022. This document does not repeat the requirements of EN 474-1:2022 but supplements or modifies the requirements for trenchers.
This document deals with:
—   trenchers (3.1);
—   trenching equipment (3.2);
NOTE   In this document "trenchers" entails both "trencher" and "trenching equipment".
—   truck vacuum trenchers (3.1.2);
—   trenchers equipped with trencher backhoe equipment (3.3).
This document provides specific health and safety requirements of the trenching equipment itself and of the interface (e.g. mechanical, electric, hydraulic, controls) between the carrier-vehicle and its equipment as well as the interaction and effects on each other when used together (e.g. visibility).
This document does not apply to carrier-vehicles which are subject to other relevant regulations.
This document does not deal with continuous surface miners as defined in ISO 19224:2017, truck-trenchers that do not incorporate a vacuum extraction system or self-propelled ride-on and pedestrian controlled floor cutting-off machinery (e.g. ground saw) which are under the scope of EN 13862:2021.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
This document does not provide performance requirements for safety related functions of control system(s).
The following significant and relevant hazards are not covered in this document:
—   Transmission of power between self-propelled machinery (or tractor) and recipient machinery;
—   Laser;
—   Lightning.
This document is not applicable to trenchers which are manufactured before the date of publication of this document by CEN.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-7:2022(Main)
Earth-moving machinery - Safety - Part 7: Requirements for scrapers
SIST EN 474-7:2022

This document, together with EN 474 1:2022, deals with all significant hazards, hazardous situations and events relevant to scrapers as defined in 3.1, except towed scrapers, when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A), associated with the whole life time of the machine as described in EN ISO 12100:2010, 5.4.
This document does not provide performance requirements for safety related functions of control system(s).
The following significant and relevant hazards are not covered in this document:
—   Transmission of power between self-propelled machinery (or tractor) and recipient machinery;
—   Laser;
—   Lightning.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for scrapers.
This document is not applicable to scrapers which are manufactured before the date of publication of this document by CEN.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 474-12:2022(Main)
Earth-moving machinery - Safety - Part 12: Requirements for cable excavators
SIST EN 474-12:2022

This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to cable excavators when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for cable excavators.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
This document does not provide performance requirements for safety related functions of control system(s).
The following significant and relevant hazards are not covered in this document:
—   Laser;
—   Lightning.
Drilling and foundation equipment (covered by EN 16228 1:2014+A1:2021 to EN 16228 7:2014+A1:2021) are not dealt with in this document.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
This document does not deal with demolition machinery.
This document is not applicable to cable excavators which are manufactured before the date of publication of this document by CEN.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day