EN ISO 2286-1:1998

Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass (ISO 2286-1:1998)

Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung der Rollencharakteristik - Teil 1: Bestimmung der Länge, Breite und Nettomasse (ISO 2286-1:1998)

Dieser Teil der vorliegenden Internationalen Norm beschreibt Verfahren zur Bestimmung der Länge, Breite und Nettomasse einer Rolle aus beschichteten textilen Flächengebilden.

Supports textiles revêtus de caoutchouc ou de plastique - Détermination des caractéristiques des rouleaux - Partie 1: Méthodes de détermination de la longueur, de la largeur et de la masse nette (ISO 2286-1:1998)

Gumirane ali plastificirane tekstilije - Ugotavljanje lastnosti zvitka - 1. del: Metode za ugotavljanje dolžine, širine in neto mase (ISO 2286-1:1998)

General Information

• Status: Withdrawn
• Publication Date: 31-May-1998
• Withdrawal Date: 04-Oct-2016
• ICS: 59.080.40 - Coated fabrics
• Technical Committee: CEN/TC 248 - Textiles and textile products
• Drafting Committee: CEN/TC 248 - Textiles and textile products
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 05-Oct-2016
• Ref Project: SIST EN ISO 2286-1:1999 - Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass (ISO 2286-1:1998)

Relations

• Replaced By: EN ISO 2286-1:2016 - Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass (ISO 2286-1:2016)
• Effective Date: 12-Oct-2016

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-1999
1DGRPHãþD
SIST EN 22286:1999
Gumirane ali plastificirane tekstilije - Ugotavljanje lastnosti zvitka - 1. del: Metode
za ugotavljanje dolžine, širine in neto mase (ISO 2286-1:1998)
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods
for determination of length, width and net mass (ISO 2286-1:1998)
Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung der
Rollencharakteristik - Teil 1: Bestimmung der Länge, Breite und Nettomasse (ISO 2286-
1:1998)
Supports textiles revetus de caoutchouc ou de plastique - Détermination des
caractéristiques des rouleaux - Partie 1: Méthodes de détermination de la longueur, de la
largeur et de la masse nette (ISO 2286-1:1998)
Ta slovenski standard je istoveten z: EN ISO 2286-1:1998
ICS:
59.080.40 3RYUãLQVNRSUHYOHþHQH Coated fabrics
WHNVWLOLMH
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL ISO
STANDARD 2286-1
First edition
1998-06-01
Rubber- or plastics-coated fabrics —
Determination of roll characteristics —
Part 1:
Methods for determination of length, width and
net mass
Supports textiles revêtus de caoutchouc ou de plastique — Détermination
des caractéristiques des rouleaux —
Partie 1: Méthodes de détermination de la longueur, de la largeur et de la
masse nette
A
Reference number
ISO 2286-1:1998(E)
ISO 2286-1:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 2286-1 was prepared by Technical Committee
ISO/TC 45, Rubber and rubber products.
Together with the other parts (see below), it cancels and replaces
ISO 2286:1986, which has been technically revised.
ISO 2286 consists of the following parts, under the general title Rubber-
and plastics-coated fabrics — Determination of roll characteristics:
— Part 1: Methods for determination of length, width and net mass
— Part 2: Methods for determination of total mass per unit area, mass per
unit area of coating and mass per unit area of substrate
— Part 3: Method for determination of thickness
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
Printed in Switzerland
ii
©
INTERNATIONAL STANDARD  ISO ISO 2286-1:1998(E)
Rubber- or plastics-coated fabrics — Determination of roll
characteristics —
Part 1:
Methods for determination of length, width and net mass
WARNING – Persons using this part of ISO 2286 should be familiar with normal laboratory practice. This part
of ISO 2286 does no
...