EN ISO 4254-11:2010
(Main)Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010)
Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010)
ISO 4254-11:2010, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of self-propelled and trailed pick-up balers, including the combination of pick-up balers with wrappers, independent of the shape or size of the bales formed. It describes methods for the elimination or reduction of hazards arising from the intended use and reasonably foreseeable misuse of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
ISO 4254-11:2010, taken together with ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to self-propelled and trailed pick-up balers, including the combination of pick-up balers with wrappers, when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer.
ISO 4254-11:2010 is not applicable to pedestrian-controlled round balers, environmental hazards, road safety, vibration and hazards related to moving parts for power transmission. It is not applicable to hazards related to maintenance or repairs carried out by professional service personnel.
Landmaschinen - Sicherheit - Teil 11: Sammelpressen ISO 4254-11:2010)
Dieser Teil von ISO 4254, der zusammen mit ISO 4254-1 anzuwenden ist, enthält sicherheitstechnische Anforderungen und deren Überprüfung für Gestaltung und Konstruktion von selbstfahrenden und gezogenen Sammelpressen, einschließlich der Kombinationen von Sammelpressen mit Ballenwicklern, unabhängig von der Form oder der Größe der hergestellten Ballen. Sie beschreibt Maßnahmen zur Vermeidung oder Verminderung von Gefährdungen, die sich aus der bestimmungsgemäßen Verwendung und der vernünftiger-weise vorhersehbaren Fehlanwendung dieser Maschinen durch eine Person (Bedienungsperson) im Rahmen des normalen Betriebes und der Wartung ergeben. Zusätzlich legt sie fest, welche Informationen über sicheres Arbeiten vom Hersteller zur Verfügung zu stellen sind. Wenn Anforderungen dieses Teils von ISO 4254 von den in ISO 4254-1 festgelegten Bestimmungen abweichen, haben die Anforderungen von diesem Teil von ISO 4254 Vorrang gegenüber den Bestimmungen von ISO 4254-1 für Maschinen, die nach den Bestimmungen von diesem Teil von ISO 4254 konstruiert und gebaut sind. Dieser Teil von ISO 4254 zusammen mit ISO 4254-1 behandelt alle signifikanten Gefährdungen (wie in Tabelle 1 aufgeführt), Gefährdungssituationen und -ereignisse von selbstfahrenden und gezogenen Sammelpressen, einschließlich der Kombinationen von Sammelpressen mit Ballenwicklern, wenn sie bestimmungsgemäß und unter den vom Hersteller vorgesehenen Bedingungen der vernünftigerweise vorhersehbaren Fehlanwendung verwendet werden (siehe Abschnitt 4). Dieser Teil von ISO 4254 gilt nicht für handgeführte Rundballenpressen, Umweltgefährdungen, Straßenverkehrssicherheit, Schwingungen und Gefährdungen im Zusammenhang mit bewegten Teilen der Kraftübertragung. Sie gilt nicht für Gefährdungen im Zusammenhang mit Wartung und Reparatur, durchgeführt von professionellem Servicepersonal. ANMERKUNG Besondere Anforderungen in Bezug auf Straßenverkehrsvorschriften werden in diesem Teil von ISO 4254 nicht berücksichtigt. Dieser Teil von ISO 4254 gilt nicht für Maschinen, die vor dem Veröffentlichungsdatum hergestellt wurden.
Matériel agricole - Sécurité - Partie 11: Ramasseuses-presses (ISO 4254-11:2010)
L'ISO 4254-11:2010, destinée à être utilisée conjointement avec l'ISO 4254-1, spécifie les exigences de sécurité et leur vérification pour la conception et la construction des ramasseuses-presses automotrices et traînées, y compris les ramasseuses-presses combinées à une enrubanneuse, indépendamment de la forme ou des dimensions des balles réalisées. Elle décrit des méthodes pour l'élimination ou la réduction de phénomènes dangereux inhérents à l'utilisation normale et à la mauvaise utilisation raisonnablement prévisible de ces machines par une personne (l'opérateur) durant le fonctionnement normal et l'entretien. En outre, elle spécifie le type d'informations que le fabricant doit donner sur les pratiques d'utilisation sûre.
L'ISO 4254-11:2010, utilisée conjointement avec l'ISO 4254-1, traite tous les phénomènes dangereux significatifs, situations dangereuses significatives et événements dangereux significatifs inhérents aux ramasseuses-presses automotrices et traînées, y compris les ramasseuses-presses combinées à une enrubanneuse, lorsqu'elles sont utilisées normalement et lorsqu'elles font l'objet d'un mauvais usage raisonnablement prévisible par le fabricant.
L'ISO 4254-11:2010 n'est pas applicable aux presses à balles rondes à conducteur à pied, aux phénomènes dangereux liés à l'environnement, à la sécurité routière, aux vibrations et aux phénomènes dangereux liés aux éléments mobiles de transmission. Elle n'est pas applicable aux phénomènes dangereux liés aux opérations de maintenance ou de réparation, qui doivent être effectuées par des professionnels habilités.
Kmetijski stroji - Varnost - 11. del: Pobiralne naprave pri balirkah (ISO 4254-11:2010)
Ta del ISO 4254, ki je namenjen uporabi skupaj z ISO/FDIS 4254-1:2004, določa varnostne zahteve in njihovo preverjanje pri načrtovanju in izdelavi samognanih in vlečenih pobiralnih naprav pri balirkah, neodvisnih od oblike ali velikosti nastalih bal. Poleg tega ta dokument določa vrste podatkov o varnih delovnih postopkih (vključno s preostalimi tveganji), ki jih mora zagotoviti proizvajalec.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2011
1DGRPHãþD
SIST EN 704:1999+A1:2009
Kmetijski stroji - Varnost - 11. del: Pobiralne naprave pri balirkah (ISO 4254-
11:2010)
Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010)
Landmaschinen - Sicherheit - Teil 11: Sammelpressen (ISO 4254-11:2010)
Matériel agricole - Sécurité - Partie 11: Ramasseuses-presses (ISO 4254-11:2010)
Ta slovenski standard je istoveten z: EN ISO 4254-11:2010
ICS:
65.060.50 Oprema za spravilo pridelkov Harvesting equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 4254-11
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2010
ICS 65.060.50 Supersedes EN 704:1999+A1:2009
English Version
Agricultural machinery - Safety - Part 11: Pick-up balers
(ISO 4254-11:2010)
Matériel agricole - Sécurité - Partie 11: Ramasseuses- Landmaschinen - Sicherheit - Teil 11: Sammelpressen ISO
presses (ISO 4254-11:2010) 4254-11:2010)
This European Standard was approved by CEN on 14 December 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4254-11:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA .5
Foreword
This document (EN ISO 4254-11:2010) has been prepared by Technical Committee ISO/TC 23 “Tractors and
machinery for agriculture and forestry” in collaboration with Technical Committee CEN/TC 144 “Tractors and
machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at
the latest by June 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 704:1999+A1:2009.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of the Machinery Directive
2006/42/EC. It is intended to be used together with EN ISO 4254-1:2009, Agricultural machinery Safety
Part 1: General requirements (ISO 4254-1:2008), and EN 15811:2009, Agricultural machinery Guards for
moving parts of power transmission Guard opening with tool (ISO/TS 28923:2007 modified).
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
The following major changes were introduced:
deletion of the reference to prEN 1553:1998, Agricultural machinery Agricultural self-propelled,
mounted, semi-mounted and trailed machines Common safety requirements, and replacement with
EN ISO 4254-1:2009, Agricultural machinery Safety Part 1: General requirements
(ISO 4254-1:2008);
deletion of the requirements related to the guarding of moving parts for power transmission dealt with in
EN 15811:2009, Agricultural machinery Guards for moving parts of power transmission Guard
opening with tool (ISO/TS 28923:2007 modified);
inclusion in the Scope of combination of pick-up balers with wrappers (and new requirements from 5.2.7
to 5.2.7.2.4);
new requirements for feeding elements designed as augers (5.2.3.1, second sentence, and new 5.2.3.2);
new requirements on automatic starting systems (5.2.4);
new requirements on manual feeding of twine (5.2.5);
new requirements on changing of knives (5.2.6);
modification on requirements against hazards related to clearing blockages (5.4.1.1 and 5.4.1.2);
new requirements on bale ejection door (5.4.2.1 second sentence and 5.4.2.2).
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 4254-11:2010 has been approved by CEN as a EN ISO 4254-11:2010 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
relevant Essential Requirements, except Essential Requirements 1.1.4, 1.1.7, 1.1.8 (self-propelled machines
only), 1.2.1, 1.2.4, 1.2.6, 1.3.2, 1.3.8.1, 1.4.2.1 (2nd paragraph), 1.5.5 (self-propelled machines only), 1.5.8,
1.5.9, 1.7.4.2 u), 3.3.2, 3.3.3, 3.4.3 and 3.6.3.1 of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
INTERNATIONAL ISO
STANDARD 4254-11
First edition
2010-12-15
Agricultural machinery — Safety —
Part 11:
Pick-up balers
Matériel agricole — Sécurité —
Partie 11: Ramasseuses-presses
Reference number
ISO 4254-11:2010(E)
©
ISO 2010
ISO 4254-11:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
ISO 4254-11:2010(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms and definitions .2
4 List of significant hazards .2
5 Safety requirements and/or protective measures.4
5.1 General .4
5.2 Requirements for all types of balers .4
5.3 Requirements for rectangular balers .8
5.4 Requirements for round balers.12
6 Verification of the safety requirements and/or protective measures .13
7 Information for use.13
7.1 Operator's manual.13
7.2 Marking.14
Bibliography.15
ISO 4254-11:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4254-11 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and
forestry, Subcommittee SC 7, Equipment for harvesting and conservation.
For the purposes of global relevance, the requirements related to the guarding of moving parts for power
transmission have been transferred and published as two separate Technical Specifications:
ISO/TS 28923:2007 (Guard opening with tool) and ISO/TS 28924:2007, which include the requirements taken
from both 4.6 and Annex C of ISO 4254-1:2008.
ISO 4254 consists of the following parts, under the general title Agricultural machinery — Safety:
⎯ Part 1: General requirements
⎯ Part 5: Power-driven soil-working machines
⎯ Part 6: Sprayers and liquid fertilizer distributors
⎯ Part 7: Combine harvesters, forage harvesters and cotton harvesters
⎯ Part 8: Solid fertilizer distributors
⎯ Part 9: Seed drills
⎯ Part 10: Rotary tedders and rakes
⎯ Part 11: Pick-up balers
⎯ Part 12: Rotary disc and drum mowers and flail mowers
1)
⎯ Part 13: Large rotary mowers
Part 2, Anhydrous ammonia applicators, has been withdrawn; Part 3, Tractors, has been cancelled and is to
be replaced by ISO 26322 (all parts), Tractors for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.