EN 3745-412:2022

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance

This document evaluates the resistance of the fiber optic cable to humidity changes at different
temperatures.

Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 412: Beständigkeit gegen Luftfeuchte

Dieses Dokument bewertet die Beständigkeit von Lichtwellenleitern gegenüber Änderungen der Luftfeuchte bei unterschiedlichen Temperaturen.

Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 412 : Résistance à l'humidité

Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne metode - 412. del: Odpornost proti vlagi

Ta dokument ocenjuje odpornost kabla iz optičnih vlaken proti spremembam vlažnosti pri različnih
temperaturah.

General Information

• Status: Published
• Publication Date: 03-May-2022
• Withdrawal Date: 29-Nov-2022
• ICS: 49.060 - Aerospace electric equipment and systems
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 10 - Optical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 04-May-2022
• Completion Date: 04-May-2022
• Ref Project: SIST EN 3745-412:2022 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance

Relations

• Replaces: EN 3745-412:2005 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2022
Nadomešča:
SIST EN 3745-412:2006
Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne
metode - 412. del: Odpornost proti vlagi
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412:
Humidity resistance
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil
412: Beständigkeit gegen Feuchtigkeit
Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais
- Partie 412 : Résistance à l'humidité
Ta slovenski standard je istoveten z: EN 3745-412:2022
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 3745-412
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2022
EUROPÄISCHE NORM
ICS 49.090 Supersedes EN 3745-412:2005
English Version
Aerospace series - Fibres and cables, optical, aircraft use -
Test methods - Part 412: Humidity resistance
Série aérospatiale - Fibres et câbles optiques à usage Luft- und Raumfahrt - Faseroptische Leitungen für
aéronautique - Méthodes d'essais - Partie 412 : Luftfahrzeuge - Prüfverfahren - Teil 412: Beständigkeit
Résistance à l'humidité gegen Feuchtigkeit
This European Standard was approved by CEN on 10 January 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3745-412:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Preparation of specimen . 4
5 Apparatus . 5
6 Method . 5
6.1 Procedure . 5
6.2 Final measurements and requirements . 5
Bibliography . 7

European foreword
This document (EN 3745-412:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD, prior to its pres
...