iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN 13123-1

(Main)

Windows, doors, shutters and curtain walling - Explosion resistance - Requirements and classification - Part 1: Shock tube

Windows, doors, shutters and curtain walling - Explosion resistance - Requirements and classification - Part 1: Shock tube

This document specifies the criteria, which windows, doors, shutters as well as curtain walling elements need to satisfy to achieve a classification when submitted to the test method described in prEN 13124 1:2022.
This document concerns a method of test against blast waves generated by using a shock tube facility to simulate explosion loadings. The document considers free-field high explosive events in the order of 100 kg to 2 500 kg TNT at distances from about 35 m to 50 m, described by the fixed loading levels EPR0 to EPR4. Scenarios characterized by variable blast parameters for further high explosive and gas explosion scenarios, reaching a classification according to prEN 13124 1:2022, can also be specified.
Load profiles which cannot be reproduced with the shock tube might be reproduced by arena testing following EN 13123 2 and EN 13124 2.
This document is applicable to blast profiles generated in a shock tube test facility used to simulate high explosive and gas explosions on windows, doors, shutters as well as curtain walling systems, complete with their frames, infills and fixings, for use in both internal and external locations in buildings. It gives no information on the explosion resistance capacity of the wall or other surrounding structure.

Fenster, Türen, Abschlüsse und Vorhangfassaden - Sprengwirkungshemmung - Anforderungen und Klassifizierung - Teil 1: Stoßrohr

Dieses Dokument legt die Kriterien fest, die Fenster, Türen, Abschlüsse sowie Vorhangfassadenelemente erfüllen müssen, um eine Klassifizierung zu erreichen, wenn diese nach dem in prEN 13124 1:2022 beschriebenen Prüfverfahren geprüft werden.
Dieses Dokument befasst sich mit einem Prüfverfahren gegen mit einem Stoßrohr erzeugte Druckwellen, mit denen Explosionsbelastungen simuliert werden. Das Dokument berücksichtigt Sprengstoffexplosionen im Freifeld in der Größenordnung von 100 kg bis 2 500 kg TNT in Entfernungen von etwa 35 m bis 50 m, die durch die festen Belastungsstufen EPR0 bis EPR4 beschrieben werden. Weitere, durch variable Druckwellenparameter charakterisierte Szenarien für Sprengstoff- oder Gasexplosionen, die eine Klassifizierung nach prEN 13124 1:2022 erreichen, können ebenfalls angegeben werden.
Belastungsprofile, die mit dem Stoßrohr nicht reproduziert werden können, könnten durch Freilandversuche nach EN 13123 2 und EN 13124 2 reproduziert werden.
Dieses Dokument kann für Explosionsprofile angewendet werden, die in einem Stoßrohr erzeugt werden, um die Auswirkungen von Sprengstoff- und Gasexplosionen auf Fenster, Türen, Abschlüsse und Vorhangfassadensysteme (einschließlich deren Rahmen, Füllungen und Befestigungen) für den Einbau im Innenbereich und Außenbereich von Gebäuden nachzuahmen. Es gibt keinen Aufschluss über die Sprengwirkungshemmung der umgebenden Wand oder Gebäudekonstruktion.

Fenêtres, portes, fermetures et façades rideaux - Résistance à l'explosion - Prescriptions et classification - Partie 1: Tube à effet de souffle (shock tube)

Le présent document spécifie les critères auxquels doivent satisfaire les fenêtres, les portes, les fermetures ainsi que les éléments de façades rideaux pour pouvoir obtenir une classification, lorsqu'ils sont soumis à la méthode d'essai décrite dans la prEN 13124 1:2022.
Le présent document concerne une méthode d'essai contre les ondes de souffle générées par l'utilisation d'un tube à effet de souffle (shock tube) simulant des charges d'explosion. Le document prend en compte des événements de forte explosion en champ libre, de l'ordre de 100 kg à 2 500 kg de TNT à des distances d'environ 35 m à 50 m, décrites par les niveaux de charge fixés EPR0 à EPR4. Des scénarios caractérisés par des paramètres de souffle variables pour d'autres scénarios d'explosion de gaz et de fortes explosion, atteignant une classification conforme à la prEN 13124 1:2022, peuvent également être définis.
Les profils de charge qui ne peuvent pas être reproduits avec le tube à effet de souffle (shock tube) peuvent être reproduits par des essais en enceinte conformément à l'EN 13123 2 et l'EN 13124 2.
Le présent document s'applique aux profils de souffle générés dans une installation d'essai des tubes à effet de souffle (shock tube), pour simuler des explosions de gaz et de fortes explosifs sur des fenêtres, des portes, des fermetures ainsi que des systèmes de façades rideaux, y compris sur leurs dormants, leurs remplissages et leurs fixations, à l'intérieur et à l'extérieur des bâtiments. Elle ne donne aucune information quant à la capacité de résistance à l'explosion du mur ou de la structure environnante.

Okna, vrata, polkna in obešene fasade - Odpornost proti eksploziji - Zahteve in klasifikacija - 1. del: Tlačni sunek

General Information

Status
Not Published
Publication Date
05-Sep-2024
ICS
13.230 - Explosion protection
91.060.50 - Doors and windows
Technical Committee
CEN/TC 33 - Doors, windows, shutters and building hardware
Drafting Committee
CEN/TC 33/WG 1/2 - Windows and doors
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
12-May-2022
Due Date
13-Oct-2022
Completion Date
12-May-2022
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Ref Project
oSIST prEN 13123-1:2022 - Windows, doors, shutters and curtain walling - Explosion resistance - Requirements and classification - Part 1: Shock tube

Relations

Revises
EN 13123-1:2001 - Windows, doors and shutters - Explosion resistance - Requirements and classification - Part 1: Shock tube
Effective Date
18-Jan-2023

Buy Standard

prEN 13123-1:2022prEN 13123-1:2022
PreviousNext
Draft
prEN 13123-1:2022
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13123-1:2022
01-april-2022
Okna, vrata, polkna in obešene fasade - Odpornost proti eksploziji - Zahteve in
klasifikacija - 1. del: Tlačni sunek
Windows, doors, shutters and curtain walling - Explosion resistance - Requirements and
classification - Part 1: Shock tube
Fenster, Türen, Abschlüsse und Vorhangfassaden - Sprengwirkungshemmung -
Anforderungen und Klassifizierung - Teil 1: Stoßrohr
Fenêtres, portes, fermetures et façades rideaux - Résistance à l'explosion - Prescriptions
et classification - Partie 1: Tube à effet de souffle (shock tube)
Ta slovenski standard je istoveten z: prEN 13123-1
ICS:
13.230 Varstvo pred eksplozijo Explosion protection
91.060.50 Vrata in okna Doors and windows
oSIST prEN 13123-1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13123-1:2022

---------------------- Page: 2 ----------------------
oSIST prEN 13123-1:2022


DRAFT
EUROPEAN STANDARD
prEN 13123-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2022
ICS 13.230; 91.060.50 Will supersede EN 13123-1:2001
English Version

Windows, doors, shutters and curtain walling - Explosion
resistance - Requirements and classification - Part 1: Shock
tube
Fenêtres, portes, fermetures et façades rideaux - Fenster, Türen, Abschlüsse und Vorhangfassaden -
Résistance à l'explosion - Prescriptions et classification Sprengwirkungshemmung - Anforderungen und
- Partie 1: Tube à effet de souffle (shock tube) Klassifizierung - Teil 1: Stoßrohr
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 33.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13123-1:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13123-1:2022
prEN 13123-1:2022 (E)

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 4
5 Classification of the level of explosion pressure resistance (EPR) . 5
Annex A (normative) Blast parameters and derivation . 7
A.1 General. 7
A.2 Symbols . 7
A.3 U
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13124-2:2004(Main)
Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test
SIST EN 13124-2:2004

This European Standard specifies a test procedure to permit classification of the explosion resistance of windows, doors and shutters together with their infills.
This European Standard concerns a test method against blast waves in open air resulting from high explosives that can be carried by hand and placed a few metres from a target. At such close distances blast values vary across an attack face. Controlled measurement of the actual blast on the face of the test specimen being difficult, costly and subject to inaccuracy, consistency of the blast forces is therefore controlled in this European Standard by the characteristics of the explosive charge and its location (see annex A and annex B).
This European Standard covers only the behaviour of the complete unit including infill, frame and fixings as tested. It gives no information on the ability of the surrounding wall or building structure to resist the direct or transmitted forces.
If the windows, doors and shutters are intended for specific conditions of climate, specific test conditions can be required.
This European Standard gives no information on the behaviour of the units subjected to other types of loading.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13123-2:2004(Main)
Windows, doors, and shutters - Explosion resistance - Requirements and classification - Part 2: Range test
SIST EN 13123-2:2004

This European Standard specifies the criteria which windows, doors and shutters shall satisfy to achieve a classification when submitted to the test method described in EN 13124-2.
This European Standard concerns a test method against blast waves in open air resulting from high explosives that can be carried by hand and placed a few metres from a target. At such close distances blast values vary across an attack face. Controlled measurement of the actual blast on the face of the test specimen being difficult, costly and subject to inaccuracy, consistency of the blast forces is therefore controlled in this European Standard by the characteristics of the explosive charge and its location.
This European Standard covers only the behaviour of the complete unit including infill, frame and fixings as tested. It gives no information on the ability of the surrounding wall or building structure to resist the direct or transmitted forces.
If the windows, doors and shutters are intended for specific conditions of climate, specific test conditions can be required (see clause 4).
This European Standard gives no information on the explosion resistance capacity of the wall or other surrounding structure.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13123-1:2001(Main)
Windows, doors and shutters - Explosion resistance - Requirements and classification - Part 1: Shock tube
SIST EN 13123-1:2001

This European Standard specifies the criteria which windows, doors and shutters shall satisfy to achieve a classification when submitted to the test method described in EN 13124-1.
This European Standard concerns a method of test against blast waves generated by using a shock tube facility to simulate a high explosive detonation in the order of 100 kg to 2 500 kg TNT at distances from about 35 m to 50 m.
This European Standard is applicable to blast overpressure generated in a shock tube test facility used to simulate a high explosive detonation on windows, doors and shutters, complete with their frames and infills, for use in both internal and external locations in buildings. It gives no information on the explosion resistance capacity of the wall or other surrounding structure.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13124-1:2001(Main)
Windows, doors and shutters - Explosion resistance - Test method - Part 1: Shock tube
SIST EN 13124-1:2001

This European Standard specifies a conventional test procedure to permit classification of the explosion resistance of windows, doors and shutter together with their infills.
This European Standard concerns a method of test against blast waves generated by using a shock tube facility to simulate a high explosive detonation in the order of 100 kg to 2 500 kg TNT at distances from about 35 m to 50 m .
This European Standard covers only the behaviour of the complete unit including infill, frame and fixings as tested. It gives no information on the ability of the surrounding wall or building structure to resist the direct or transmitted forces.
If the windows, doors and shutters are intended for specific conditions of climate, specific test conditions may be required.
It gives no information on the behaviour of the units subjected to other types of loading.
NOTE   Care should be taken to ensure that all joints between the wall and the window or door have protection which is at least equal to that of the window or door.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 13124-2(Main)
Windows, doors, shutters and curtain walling - Explosion resistance - Test method - Part 2: Arena test
oSIST prEN 13124-2:2023

This document specifies a conventional test procedure to permit classification of the explosion resistance of windows, doors, shutters, together with their infills, as well as curtain walling elements.
This document concerns a method of test against blast waves produced by high explosives in an arena test. The loading categories are defined by pressure and impulse parameters and represent free-field high explosive events caused by:
-   3 kg to 20 kg (TNT equivalent) at stand-off distances from 3 m to 9 m, described by the fixed loading levels PXR 1 to PXR 7;
-   100 kg to 500 kg (TNT equivalent) at stand-off distances from about 15 m to 30 m, described by the fixed loading levels VXR 1 to VXR 7.
It produces a classification according to prEN 13123-2:2023.
Scenarios characterized by specified blast parameters for other high explosive scenarios, can also be specified.
Blast loads which cannot be produced in an arena test might be produced by a shock tube test following prEN 13123-1:2022 and prEN 13124-1:2022.
This document is applicable to blast waves generated by explosions in an arena test facility to produce high explosive blast loads on windows, doors and shutters as well as curtain walling systems, complete with their frames, infills and fixings, for use in both internal and external locations in buildings. It gives no information on the explosion resistance capacity of the wall or other surrounding structure.
This document covers only the behaviour of the complete test specimen including infill, frame and fixings as tested. It gives no information on the ability of the surrounding wall or building structure to resist the direct or transmitted forces.
If the windows, doors, shutters and curtain walling components are intended for specific conditions of climate, specific test conditions can be required.
Requirements for the performance of opening and locking mechanisms or for testing in an open condition can also be specified. It gives no information on the behaviour of the test specimens subjected to other types of loading.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 13123-2(Main)
Windows, doors, shutters and curtain walling - Explosion resistance - Requirements and classification - Part 2: Arena test
oSIST prEN 13123-2:2023

This document specifies the criteria, which windows, doors, shutters as well as curtain walling elements need to satisfy to achieve a classification when submitted to the test method described in prEN 13124-2:2023.
This document concerns a method of test against blast waves produced by high explosives in an arena test. This document considers free-field high explosive events equivalent to:
-   3 kg to 20 kg (TNT equivalent) at distances from 3 m to 9 m, described by the fixed classification levels PXR 1 to PXR 7;
-   100 kg to 500 kg (TNT equivalent) at distances from about 15 m to 30 m, described by the fixed classification levels VXR 1 to VXR 7.
It produces a classification according to prEN 13124 2:2023. Indicative charge sizes and stand-off distances producing these loading levels are shown in Annex B.
Blast loadings characterised by user specified blast parameters for other high explosive scenarios can also be specified.
Blast loads which cannot be produced in an arena test might be produced by a shock tube test following prEN 13123-1:2022 and prEN 13124-1:2022.
This document is applicable to blast waves generated by explosives in an arena test facility to produce high explosive blast loads on windows, doors and shutters as well as curtain walling systems, complete with their frames, infills and fixings, for use in both internal and external locations in buildings. It gives no information on the explosion resistance capacity of the wall or other surrounding structure.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 13124-1(Main)
Windows, doors, shutters and curtain walling - Explosion resistance - Test method - Part 1: Shock tube
oSIST prEN 13124-1:2022

This document specifies a conventional test procedure to permit classification of the explosion resistance of windows, doors, shutters, together with their infills, as well as curtain walling elements.
This document concerns a method of test against blast waves generated using a shock tube facility to simulate detonation events. This document considers high explosive detonations in the order of 100 kg to 2 500 kg TNT equivalent at distances from about 35 m to 50 m, described by the fixed loading levels EPR0 to EPR4. Scenarios characterized by variable blast parameters for further high explosive detonations and gas or chemical explosions can also be specified.
This document covers only the behaviour of the complete test specimen including infill, frame and fixings as tested.
This document gives no information on the ability of the surrounding wall or building structure to resist the direct or transmitted forces.
If the windows, doors, shutters and curtain walling components are intended for specific conditions of climate, specific test conditions can be required.
Requirements for the performance of opening and locking mechanisms or for testing in an open condition can also be specified.
This document gives no information on the behaviour of the test specimens subjected to other types of loading.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13124-2:2004(Main)
Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test
SIST EN 13124-2:2004

This European Standard specifies a test procedure to permit classification of the explosion resistance of windows, doors and shutters together with their infills.
This European Standard concerns a test method against blast waves in open air resulting from high explosives that can be carried by hand and placed a few metres from a target. At such close distances blast values vary across an attack face. Controlled measurement of the actual blast on the face of the test specimen being difficult, costly and subject to inaccuracy, consistency of the blast forces is therefore controlled in this European Standard by the characteristics of the explosive charge and its location (see annex A and annex B).
This European Standard covers only the behaviour of the complete unit including infill, frame and fixings as tested. It gives no information on the ability of the surrounding wall or building structure to resist the direct or transmitted forces.
If the windows, doors and shutters are intended for specific conditions of climate, specific test conditions can be required.
This European Standard gives no information on the behaviour of the units subjected to other types of loading.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13123-2:2004(Main)
Windows, doors, and shutters - Explosion resistance - Requirements and classification - Part 2: Range test
SIST EN 13123-2:2004

This European Standard specifies the criteria which windows, doors and shutters shall satisfy to achieve a classification when submitted to the test method described in EN 13124-2.
This European Standard concerns a test method against blast waves in open air resulting from high explosives that can be carried by hand and placed a few metres from a target. At such close distances blast values vary across an attack face. Controlled measurement of the actual blast on the face of the test specimen being difficult, costly and subject to inaccuracy, consistency of the blast forces is therefore controlled in this European Standard by the characteristics of the explosive charge and its location.
This European Standard covers only the behaviour of the complete unit including infill, frame and fixings as tested. It gives no information on the ability of the surrounding wall or building structure to resist the direct or transmitted forces.
If the windows, doors and shutters are intended for specific conditions of climate, specific test conditions can be required (see clause 4).
This European Standard gives no information on the explosion resistance capacity of the wall or other surrounding structure.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13123-1:2001(Main)
Windows, doors and shutters - Explosion resistance - Requirements and classification - Part 1: Shock tube
SIST EN 13123-1:2001

This European Standard specifies the criteria which windows, doors and shutters shall satisfy to achieve a classification when submitted to the test method described in EN 13124-1.
This European Standard concerns a method of test against blast waves generated by using a shock tube facility to simulate a high explosive detonation in the order of 100 kg to 2 500 kg TNT at distances from about 35 m to 50 m.
This European Standard is applicable to blast overpressure generated in a shock tube test facility used to simulate a high explosive detonation on windows, doors and shutters, complete with their frames and infills, for use in both internal and external locations in buildings. It gives no information on the explosion resistance capacity of the wall or other surrounding structure.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day