EN 15651-3:2010

Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints

This document specifies definitions and requirements for sealants used for sealing of joints applied in sanitary areas in the interior of buildings exposed to non-pressurized water.
It covers joints in:
-   bathrooms;
-   toilets;
-   showers;
-   domestic kitchens.
Industrial, drinking water, underwater (swimming pools, sewage systems, etc.) and food contact applications are excluded from the scope.
This document does not provide criteria or recommendations for the design of joints and installation of sealants in sanitary applications.
NOTE   Provisions on evaluation of conformity (i.e. Initial Type Testing and Factory Production Control) and marking of these products are given in EN 15651-5.
This document does not apply to non-structural sealants in any of non-paste form, to those used in sanitary joints.

Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 3: Dichtstoffe für Fugen im Sanitärbereich

Diese Europäische Norms legt Definitionen und Anforderungen an Dichtstoffe zum Abdichten von Fugen im Sanitär¬bereich im Innern von Gebäuden fest, die keinem Druckwasser ausgesetzt sind.
Erfasst werden Fugen in
-   Badezimmern;
-   Toiletten;
-   Duschen;
-   Küchen in Haushalten.
Anwendungen für Brauch  und Trinkwasser, Unter-Wasser-Anwen¬dungen (Schwimmbäder, Abwasser-systeme usw.) und Anwendungen mit Nahrungsmittelkontakt fallen nicht in den Anwendungsbereich dieser Norm.
Diese Europäische Norms legt keine Kriterien oder Empfehlungen für die Ausführung der Fugen und die Installation der Dichtstoffe für Anwendungen im Sanitärbereich fest.
ANMERKUNG   Festlegungen zur Bewertung der Konformität (d. h. zur Erstprüfung sowie zur werkseigenen Produk¬tionskontrolle) und zur Kennzeichnung dieser Produkte werden in EN 15651 5 angegeben.
Diese Europäische Norms gilt nicht für nicht tragende, nicht plastische (nicht in pastöser Form vorliegende) Dicht¬stoffe, die für Fugen im Sanitärbereich angewendet werden.

Mastics pour joints pour des usages non structuraux dans les constructions immobilières et pour chemins piétonniers - Partie 3: Mastics sanitaires

La présente Norme européenne spécifie les définitions et les exigences relatives aux mastics utilisés pour
calfeutrer des joints exposés à une eau n’étant pas sous pression dans les zones sanitaires à l’intérieur des
bâtiments.
Il traite des joints dans :
⎯ les salles de bain ;
⎯ les toilettes ;
⎯ les douches ;
⎯ les cuisines domestiques.
Les applications industrielles et celles en rapport avec l’eau potable, sous l’eau (piscines, systèmes d’égout,
etc.) et en cas de contact alimentaire sont exclues du domaine d’application.
Cette Norme européenne ne fournit pas de critères ou de recommandations pour la conception des joints et la
mise en oeuvre des mastics dans les applications sanitaires.
NOTE Les dispositions concernant l’évaluation de la conformité (à savoir l’essai de type initial et le contrôle de la
production en usine) et le marquage de ces produits sont données dans l’EN 15651-5.
Cette Norme européenne s’applique aux mastics sanitaires non structurels sous forme pâteuse.

Tesnilne mase za nekonstrukcijske stike v stavbah in na sprehajalnih površinah - 3. del: Tesnilne mase za stike v sanitarijah

Ta evropski standard opredeljuje definicije in zahteve za tesnilne mase, ki se uporabljajo za tesnjenje stikov v sanitarnih območjih v notranjosti stavb, ki so izpostavljeni vodi, ki ni pod pritiskom. Zajema stike v: kopalnicah; straniščih; prhah; kuhinjah v gospodinjstvih. Industrijska voda, pitna voda, podvodna uporaba (plavalni bazeni, kanalizacijski sistemi, itd.) in uporaba v stiku s hrano so izključeni iz področja tega standarda. Ta evropski standard ne zagotavlja meril ali priporočil za načrtovanje stikov in namestitev tesnilnih mas za uporabo v sanitarijah.

General Information

• Status: Withdrawn
• Publication Date: 02-Mar-2010
• Withdrawal Date: 11-Sep-2012
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 349 - Sealants for joints in building construction
• Drafting Committee: CEN/TC 349/WG 3 - Sealants for sanitary joints
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 12-Sep-2012
• Completion Date: 12-Sep-2012
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 15651-3:2010 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints

Relations

• Replaced By: EN 15651-3:2012 - Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
• Effective Date: 19-Sep-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tesnilne mase za nekonstrukcijske stike v stavbah in na sprehajalnih površinah - 3. del: Tesnilne mase za stike v sanitarijahFugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 3: Dichtstoffe für Fugen im SanitärbereichMastics pour joints dans la construction immobilière - Définitions, exigences et évaluation de la conformité - Partie 3: Mastics sanitairesSealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints91.140.70Sanitarne napraveSanitary installations91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 15651-3:2010SIST EN 15651-3:2010en,de01-maj-2010SIST EN 15651-3:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15651-3
March 2010 ICS 91.100.50 English Version
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
Mastics pour joints dans la construction immobilière - Définitions, exigences et évaluation de la conformité - Partie 3: Mastics sanitaires
Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 3: Dichtstoffe für Fugen im Sanitärbereich This European Standard was approved by CEN on 29 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15651-3:2010: ESIST EN 15651-3:2010

Example on the frequency of tests for factory production control . 11 SIST EN 15651-3:2010

(ISO 7390:2003) EN ISO 8340, Building construction — Sealants — Determination of tensile properties at maintained extension (ISO 8340:2005) EN ISO 9047, Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001) EN ISO 10563, Building construction — Sealants — Determination of change in mass and volume
(ISO 10563:2005) EN ISO 10590, Building construction — Sealants — Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005) EN ISO 10591, Building construction — Sealants — Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005) EN ISO 11358, Plastics — Thermogravimetry (TG) of polymers — General principles (ISO 11358:1997) EN ISO 11600:2003, Building construction — Jointing products — Classification and requirements for sealants (ISO 11600:2002) EN ISO 11925-2, Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single-flame source test (ISO 11925-2:2002) ISO 13640, Building construction — Jointing products — Specifications for test substrates 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 26927:1990 and the following apply. 3.1
non-reactive sealant mainly physical drying mechanism, without significant change in the molecular weight of the main polymer 3.2
reactive sealant mainly curing by chemical reaction, with significant increase of the molecular weight of the main polymer 3.3
cure irreversible transformation of a sealant from a liquid or paste like state into a hardened or rubber like solid state 3.4
uncured/wet state of a sealant prior to the above transformation SIST EN 15651-3:2010

At least three samples shall be tested and five measurements taken per sample. The mean value and tolerances of all measurements, recorded to the nearest unit, shall be declared. 4.2 Conditioning, test procedure and substrates When determining the classification of a sanitary sealant according to the requirements of this standard, the same conditioning procedure shall be used in all the relevant test methods (Method A or Method B conditioning shall be used for all relevant tests). For each test method, three test specimens for each substrate shall be tested
...