Modified starch - Determination of carboxyl group content of oxidized starch (ISO 11214:1996)

Migrated from Progress Sheet (TC Comment) (2000-07-10): According to a PC4 recommendation, CEN/BT agreed to launch a parallel voting ++ procedure on the draft international standard derived from the above ++ mentionned subject (Ref.nr. in ISO 11214).

Amidon modifié - Dosage des groupes carboxyles dans l'amidon oxydé (ISO 11214:1996)

La présente Norme internationale prescrit une méthode pour le dosage des groupes carboxyles dans l'amidon oxydé. La méthode convient au dosage des groupes carboxyles jusqu'à une teneur de 1 % (m/m).

Modificiran škrob - Določevanje karboksilnih skupin v oksidiranem škrobu (ISO 11214:1996)

General Information

Status
Published
Publication Date
30-Jun-1996
Withdrawal Date
30-Oct-1997
Technical Committee
Drafting Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
24-Jan-2001
Completion Date
24-Jan-2001

Buy Standard

Standard
EN ISO 11214:1998
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Amidon modifié - Dosage des groupes carboxyles dans l'amidon oxydé (ISO 11214:1996)Modified starch - Determination of carboxyl group content of oxidized starch (ISO 11214:1996)67.180.20Škrob in izdelki iz njegaStarch and derived productsICS:Ta slovenski standard je istoveten z:EN ISO 11214:1996SIST EN ISO 11214:1998en01-november-1998SIST EN ISO 11214:1998SLOVENSKI
STANDARD



SIST EN ISO 11214:1998



SIST EN ISO 11214:1998



SIST EN ISO 11214:1998



SIST EN ISO 11214:1998



SIST EN ISO 11214:1998



INTERNATIONAL STANDARD IS0 11214 First edition 1996-07-01 Modified starch - Determination of carboxyl group content of oxidized starch Amidon modifi6 - Dosage des groupes carboxyles dans I’amidon oxyd6 Reference number IS0 11214:1996(E) SIST EN ISO 11214:1998



IS0 11214:1996(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 11214 was prepared by Technical Committee lSO/TC 93, Starch (including derivatives and by-products). Annexes A and B of this International Standard are for information only. 0 IS0 1996 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-121 1 Geneve 20 l Swi tzerland Printed in Switzerland SIST EN ISO 11214:1998



INTERNATIONAL STANDARD 0 ISO ISO 11214:1996(E) Modified starch - Determination of carboxyl group content of oxidized starch 1 Scope This International Standard specifies a method for the determination of the carboxyl group content of oxidized starch. The method is suitable for determining carboxyl group contents up to 1 % (m/m). 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publi- cation, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most re- cent editions of the standards indicated below. Members of IEC and IS0 maintain registers of cur- rently valid International Standards. IS0 1666: --J), Starch - Determination of moisture content - Oven-drying method. I SO 3696: 1987, Water for analytical labora tory use - Specification and test methods. IS0 3946:1982, Starches and derived products - Determination of total phosphorus content - Spectrophotometric method. 3 Principle The carboxyl groups are converted into the acid form by adding a mineral acid to a homogenized test por- tion of the oxidized starch. The cations and the excess acid are eliminated by washing with water. The washed sample is gelatinized and titrated with sodium hydroxide standard solution. For oxidized potato starch, the result is corrected for the phosphate group content. 4 Reagents and materials Use only reagents of recognized analytical grade, un- less otherwise specified, and water complying with grade 2 in accordance with IS0 3696. The water used shall be free of carbon dioxide. 4.1 Hydrochloric acid, 0,l mol/l solution. 4.2 Sodium hydroxide, standard volumetric sol- ution, c(NaOH) = 0,l mol/l, free of carbon dioxide. 4.3 Phenolphthalein in ethanol, 1 g/l solution,- 90 % (VW). 4.4 Silver nitrate, 10 g/l solution. 5 Apparatus Usual laboratory apparatus and in particular the fol- lowing. 5.1 Beakers, of capacity 100 ml and 600 ml. 5.2 Magnetic stirrer. 1) To be published. (Revision of IS0 1666:1973) SIST EN ISO 11214:1998



IS0 11214:1996(E) 0 IS0 5.3 Vacuum filter, equipped with a fritted glass crucible of medium porosity, or a Buchner funnel, of diameter 55 mm, equipped with a small, round filter paper (medium filtration rate). 5.4 Boiling water bath. 5.5 Mechanical stirrer. 5.6 Blade mill. 5.7 Test sieve, of aperture size 800 pm. 6 Preparation of the test sample Pass the sample through the test sieve (5.7). If the sample does not pass
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.