EN ISO 10215:2018

Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018)

ISO 10215:2018 specifies a visual method for determining the image clarity of anodic oxidation coatings on aluminium and its alloys, using a chart scale and a lightness scale, which are defined. The method is applicable only to flat surfaces that can reflect the image of the chart scale pattern.

Anodisieren von Aluminium und Aluminiumlegierungen - Visuelle Bestimmung der Abbildungsschärfe von anodisch erzeugten Oxidschichten - Messgittermethode (ISO 10215:2018)

Dieses Dokument legt ein visuelles Verfahren zur Bestimmung der Abbildungsschärfe von anodisch erzeugten Oxidschichten auf Aluminium und seinen Legierungen fest. Dabei werden ein Messgitter und eine Helligkeitsskala verwendet, die definiert sind. Die Prüfung ist nur auf einer ebenen Fläche anwendbar, die das Bild des Messgitters reflektieren kann.

Anodisation de l'aluminium et de ses alliages - Détermination de la netteté d'image sur couches anodiques - Méthode des échelles graduées (ISO 10215:2018)

ISO 10215:2018 spécifie une méthode visuelle pour la détermination de la netteté de l'image réfléchie par les couches anodiques déposées sur l'aluminium et ses alliages, utilisant une échelle graduée et une échelle de clarté. La méthode n'est applicable qu'aux surfaces planes susceptibles de refléter l'image d'une échelle graduée type.

Anodizacija aluminija in aluminijevih zlitin - Vizualno ugotavljanje ostrine slike v anodizirani plasti - Metoda tabelarične lestvice (ISO 10215:2018)

Ta dokument opisuje vizualno metodo za določanje jasnosti slike anodno oksidiranih plasti
na aluminiju in aluminijevih zlitinah s pomočjo grafične lestvice in lestvice svetlosti, ki sta določeni. Ta metoda se uporablja samo na ravnih površinah, ki lahko odsevajo sliko vzorca grafične lestvice.

General Information

• Status: Published
• Publication Date: 20-Mar-2018
• Withdrawal Date: 29-Sep-2018
• ICS: 25.220.20 - Surface treatment
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 21-Mar-2018
• Completion Date: 21-Mar-2018
• Ref Project: SIST EN ISO 10215:2018 - Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018)

Relations

• Replaces: EN ISO 10215:2010 - Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2010)
• Effective Date: 28-Mar-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10215:2018
01-maj-2018
1DGRPHãþD
SIST EN ISO 10215:2011
$QRGL]DFLMDDOXPLQLMDLQDOXPLQLMHYLK]OLWLQ9L]XDOQRXJRWDYOMDQMHRVWULQHVOLNHY
DQRGL]LUDQLSODVWL0HWRGDWDEHODULþQHOHVWYLFH,62
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic
oxidation coatings - Chart scale method (ISO 10215:2018)
Anodisieren von Aluminium und Aluminiumlegierungen - Visuelle Bestimmung der
Abbildungsschärfe von anodisch erzeugten Oxidschichten - Messgittermethode (ISO
10215:2018)
Anodisation de l'aluminium et de ses alliages - Détermination de la netteté d'image sur
couches anodiques - Méthode des échelles graduées (ISO 10215:2018)
Ta slovenski standard je istoveten z: EN ISO 10215:2018
ICS:
25.220.20 Površinska obdelava Surface treatment
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
SIST EN ISO 10215:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10215:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 10215:2018


EN ISO 10215
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2018
EUROPÄISCHE NORM
ICS 25.220.20 Supersedes EN ISO 10215:2010
English Version

Anodizing of aluminium and its alloys - Visual
determination of image clarity of anodic oxidation coatings
- Chart scale method (ISO 10215:2018)
Anodisation de l'aluminium et de ses alliages - Anodisieren von Aluminium und
Détermination de la netteté d'image sur couches Aluminiumlegierungen - Visuelle Bestimmung der
anodiques - Méthode des échelles graduées (ISO Abbildungsschärfe von anodisch erzeugten
10215:2018) Oxidschichten - Messgittermethode (ISO 10215:2018)
This European Standard was approved by CEN on 16 March 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10215:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10215:2018
EN ISO 10215:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10215:2018
EN ISO 10215:2018 (E)
European foreword
This document (EN ISO 10215:2018) has been prepared by Technical Committee ISO/TC 79 "Light
metals and their alloys" in collaboration with Technical Committee CEN/TC 132 “Aluminium and
aluminium alloys”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2018, and conflicting national standards
shall be withdrawn at the latest by September 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10215:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the U
...