Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content - Amendment 1 (ISO 17892-1:2014/DAM 1:2021)

Geotechnische Erkundung und Untersuchung - Laborversuche an Bodenproben - Teil 1: Bestimmung des Wassergehalts - Änderung 1 (ISO 17892-1:2014/DAM 1:2021)

No scope available

Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 1: Détermination de la teneur en eau - Amendement 1 (ISO 17892-1:2014/DAM 1:2021)

Geotehnično preiskovanje in preskušanje - Laboratorijsko preskušanje zemljin - 1. del: Ugotavljanje vlažnosti - Dopolnilo A1 (ISO 17892-1:2014/DAM 1:2021)

General Information

Status

Not Published

ICS

13.080.20 - Physical properties of soils

13.080.40 - Hydrological properties of soils

93.020 - Earthworks. Excavations. Foundation construction. Underground works

Technical Committee

CEN/TC 341 - Geotechnical Investigation and Testing

Drafting Committee

CEN/TC 341 - Geotechnical Investigation and Testing

Current Stage

6055 - CEN Ratification completed (DOR) - Publishing

Due Date

31-Mar-2022

Completion Date

31-Mar-2022

Ref Project

SIST EN ISO 17892-1:2015/oprA1:2022 - Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content - Amendment 1 (ISO 17892-1:2014/DAM 1:2021)

RELATIONS

Amends

EN ISO 17892-1:2014 - Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content (ISO 17892-1:2014)

Effective Date

24-Feb-2021

Buy Standard

Amendment

EN ISO 17892-1:2015/oprA1:2022

English language

4 pages

sale 10% off

Preview

sale 10% off

Preview

e-Library read for

1 day

Standards Content (sample)

SIST EN ISO 17892-1:2015/oprA1:2022

SLOVENSKI STANDARD
SIST EN ISO 17892-1:2015/oprA1:2022
01-februar-2022

Geotehnično preiskovanje in preskušanje - Laboratorijsko preskušanje zemljin - 1.

del: Ugotavljanje vlažnosti - Dopolnilo A1 (ISO 17892-1:2014/DAM 1:2021)

Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination

of water content - Amendment 1 (ISO 17892-1:2014/DAM 1:2021)

Geotechnische Erkundung und Untersuchung - Laborversuche an Bodenproben - Teil 1:

Bestimmung des Wassergehalts - Änderung 1 (ISO 17892-1:2014/DAM 1:2021)

Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 1:

Détermination de la teneur en eau - Amendement 1 (ISO 17892-1:2014/DAM 1:2021)
Ta slovenski standard je istoveten z: EN ISO 17892-1:2014/prA1
ICS:
13.080.20 Fizikalne lastnosti tal Physical properties of soils
93.020 Zemeljska dela. Izkopavanja. Earthworks. Excavations.
Gradnja temeljev. Dela pod Foundation construction.
zemljo Underground works
SIST EN ISO 17892-1:2015/oprA1:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 17892-1:2015/oprA1:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 17892-1:2015/oprA1:2022
DRAFT AMENDMENT
ISO 17892-1:2014/DAM 1
ISO/TC 182 Secretariat: BSI
Voting begins on: Voting terminates on:
2021-11-18 2022-02-10
Geotechnical investigation and testing — Laboratory
testing of soil —
Part 1:
Determination of water content
AMENDMENT 1
Reconnaissance et essais géotechniques — Essais de laboratoire sur les sols —
Partie 1: Détermination de la teneur en eau
AMENDEMENT 1
ICS: 13.080.20; 93.020
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 17892-1:2014/DAM 1:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2021
---------------------- Page: 3 ----------------------
SIST EN ISO 17892-1:2015/oprA1:2022
ISO 17892-1:2014/DAM 1:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN

EN ISO 17892-1:2014(Main)

Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content (ISO 17892-1:2014)

SIST EN ISO 17892-1:2015

ISO 17892-1:2014 specifies a method of determining the water content of soils.
It is applicable to the laboratory determination of the water (also known as moisture) content of a soil test specimen by oven-drying within the scope of geotechnical investigations. The water content is required as a guide to the classification of natural soils and as a control criterion in re-compacted soils, and is measured on samples used for most field and laboratory tests. The oven-drying method is the definitive procedure used in usual laboratory practice.
The practical procedure for determining the water content of a soil is to determine the mass loss on drying the test specimen to a constant mass in a drying oven controlled at a given temperature. The mass loss is assumed to be due to free water and is referenced to the remaining dry mass of solid particles.

Standard
18 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN ISO 17892-1:2014(Main)

Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content (ISO 17892-1:2014)

SIST EN ISO 17892-1:2015

Standard
18 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN ISO 9902-6:2021(Main)

Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2018)

SIST EN ISO 9902-6:2021

This document covers the different types of weaving and knitting machines defined in ISO 5247 (all parts)[2] and ISO 7839[3], respectively.
It is applicable to:
       full-width weaving machines with weft insertion by:
       shuttles;
       rigid, telescopic or flexible rapiers;
       projectiles;
       hydraulic (waterjet) or by pneumatic (airjet) nozzle;
       narrow fabric weaving machines with weft insertion by shuttles or needles;
       jacquard machines;
       knitting machinery including:
       circular knitting;
       flat bed knitting;
       warp knitting;
       raschel;
       cotton (flat weft weaving);
       other fabric manufacturing machines e.g.:
       multi-phase weaving machines;
       circular weaving machines;
       stitch bonding machines.
NOTE       Because of the high requirements on measurement conditions, grade 1 methods are normally not feasible for textile machinery.

Standard
23 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 15746-2:2020(Main)

Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements

SIST EN 15746-2:2021

This document specifies the significant hazards, hazardous situations and events, common to self-propelled road-rail machines - henceforward referred to as machines - and associated equipment, arising due to the adaptation for their use on railway networks and urban rail networks. These machines are intended for construction, maintenance and inspection of the railway infrastructure, shunting and emergency rescue vehicles, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer; see Clause 4.
This document deals with the common hazards during assembly and installation, commissioning, travelling on and off track, use including setting, programming, and process changeover, operation, cleaning, fault finding, maintenance and de-commissioning of the machines.
NOTE   Specific measures for exceptional circumstances are not dealt with in this document. They can be subject to negotiation between manufacturer and the machine operator.
The common hazards dealt with include the general hazards presented by the machines, also the hazards presented by the following specific machine functions:
a)   excavation;
b)   ballast tamping, ballast cleaning, ballast regulating, ballast consolidating;
c)   track construction, renewal, maintenance and repair;
d)   lifting;
e)   overhead contact line system renewal / maintenance;
f)   maintenance of the components of the infrastructure;
g)   inspection and measurement of the components of the infrastructure;
h)   working in tunnels;
i)   shunting;
j)   vegetation control;
k)   emergency rescue and recovery;
during commissioning, use, maintenance and servicing.
For a road-rail machine it is assumed that an EU road permissible host vehicle will offer an accepted safety level for its designed basic functions before conversion. Unless explicitly stated otherwise in a particular clause this specific aspect is not dealt with in this document.
This document does not deal with:
1)   requirements with regard to the quality of work and the performance of the machine;
2)   machines that utilize the contact line system for traction purposes;
3)   specific requirements established by a railway Infrastructure Manager or Urban Rail Manager;
4)   negotiations between the manufacturer and the machine operator for additional or alternative requirements;
5)   requirements for use and travel of the machine on public highway;
6)   hazards due to air pressure caused by the passing of high-speed trains at more than 190 km/h;
7)   requirements which could be necessary in case of use in extreme conditions, such as extreme ambient temperatures (tropical or polar); see 5.30;
8)   highly corrosive or contaminating environment, e.g. due to the presence of chemicals;
9)   potentially explosive atmospheres.
Other special machines used on railway tracks are dealt with in other European Standards, see Annex E.

Standard
86 pages
English language
sale 10% off
e-Library read for
1 day
Draft
79 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 352-10:2020(Main)

Hearing protectors - Safety requirements - Part 10: Entertainment audio earplugs

SIST EN 352-10:2021

This European Standard is applicable to entertainment audio earplugs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.

Standard
9 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 352-8:2020(Main)

Hearing protectors - Safety requirements - Part 8: Entertainment audio earmuffs

SIST EN 352-8:2021

This European Standard is applicable to entertainment audio ear-muffs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.

Standard
9 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 12999:2020(Main)

Cranes - Loader cranes

SIST EN 12999:2020

This document specifies minimum requirements for design, calculation, examinations and tests of hydraulic powered loader cranes and their mountings on vehicles or static foundations.
This document applies to loader cranes designed to be installed on:
-   road vehicles, including trailers, with load carrying capability;
-   tractors (road or agricultural), where only a towed trailer has capability to carry goods;
-   demountable bodies to be carried by any of the above;
-   other types of carriers (e.g. separate loaders, crawlers, rail vehicles, non-seagoing vessels);
-   static foundations.
This document also applies to loader cranes equipped with special tools or interchangeable equipment (e.g. grapple, clamshell bucket, pallet clamp, etc.), as specified in the operator’s manual.
This document does not apply to loader cranes used on board sea going vessels or to articulated boom system cranes which are designed as total integral parts of special equipment such as forwarders.
The hazards covered by this document are identified in Clause 4.
This document does not cover hazards related to the lifting of persons.
NOTE   The use of cranes for lifting of persons can be subject to specific national regulations.
This document is not applicable to loader cranes manufactured before the publication of this document. For loader cranes designed before the publication of this document, the provisions concerning stress calculations in the version of EN 12999 that was valid at the time of their design, are still applicable.

Standard
107 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN ISO 14155:2020(Main)

Clinical investigation of medical devices for human subjects - Good clinical practice (ISO 14155:2020)

SIST EN ISO 14155:2020

This document addresses good clinical practice for the design, conduct, recording and reporting of clinical investigations carried out in human subjects to assess the clinical performance or effectiveness and safety of medical devices.
For post-market clinical investigations, the principles set forth in this document are intended to be followed as far as relevant, considering the nature of the clinical investigation (see Annex I).
This document specifies general requirements intended to
—     protect the rights, safety and well-being of human subjects,
—     ensure the scientific conduct of the clinical investigation and the credibility of the clinical investigation results,
—     define the responsibilities of the sponsor and principal investigator, and
—     assist sponsors, investigators, ethics committees, regulatory authorities and other bodies involved in the conformity assessment of medical devices.
NOTE 1  Users of this document need to consider whether other standards and/or national requirements also apply to the investigational device(s) under consideration or the clinical investigation. If differences in requirements exist, the most stringent apply.
NOTE 2  For Software as a Medical Device (SaMD) demonstration of the analytical validity (the SaMD's output is accurate for a given input), and where appropriate, the scientific validity (the SaMD's output is associated to the intended clinical condition/physiological state), and clinical performance (the SaMD's output yields a clinically meaningful association to the target use) of the SaMD, the requirements of this document apply as far as relevant (see Reference [4]). Justifications for exemptions from this document can consider the uniqueness of indirect contact between subjects and the SaMD.
This document does not apply to in vitro diagnostic medical devices. However, there can be situations, dependent on the device and national or regional requirements, where users of this document might consider whether specific sections and/or requirements of this document could be applicable.

Standard
96 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 12514:2020(Main)

Components for supply systems for consuming units with liquid fuels

SIST EN 12514:2020

This European Standard specifies the safety and performance requirements and tests methods for the components for supply systems. Their intended use is the supply with liquid fuel for one or more consuming units from one or more tanks.
This European Standard applies to pressurised, negative pressurised, unpressurised, underground, above ground, inside and/or outside systems to supply liquid fuels.
The components for supply systems covered by this standard are piping kits/systems and their components.
Not covered by this standard are items belonging to the consuming unit (e. g.: heating/cooling appliances in buildings) and items used for the mounting and support of components.
Not covered by this standard are items with the intended use of gas for building heating/cooling systems and any items of heating networks.
Not covered are items used for drainage (including highways) and disposal of other liquids and gaseous waste, supply of gases, pressure and vacuum systems, communications, sanitary and cleaning fixtures and storage fixtures.

Standard
220 pages
English language
sale 10% off
e-Library read for
1 day
Standard
220 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN ISO 3691-4:2020(Main)

Industrial trucks - Safety requirements and verification - Part 4: Driverless industrial trucks and their systems (ISO 3691-4:2020)

SIST EN ISO 3691-4:2020

This document specifies safety requirements and the means for their verification for driverless industrial trucks (hereafter referred to as trucks) and their systems.
Examples of driverless industrial trucks (trucks of ISO 5053-1) can also be known as: "automated guided vehicle", "autonomous mobile robot", "bots", "automated guided cart", "tunnel tugger", "under cart", etc.
This document also contains requirements for driverless industrial trucks which are provided with:
—     automatic modes which either require operators' action(s) to initiate or enable such automatic operations;
—     the capability to transport one or more riders (which are neither considered as drivers nor as operators);
—     additional manual modes which allow operators to operate the truck manually; or
—     a maintenance mode which allows manual operation of truck functions for maintenance reasons.
It is not applicable to trucks solely guided by mechanical means (rails, guides, etc.) or to remotely controlled trucks, which are not considered to be driverless trucks.
For the purposes of this document, a driverless industrial truck is a powered truck, which is designed to operate automatically. A driverless truck system comprises the control system, which can be part of the truck and/or separate from it, guidance means and power system. Requirements for power sources are not covered in this document.
The condition of the operating zone has a significant effect on the safe operation of the driverless industrial truck. The preparations of the operating zone to eliminate the associated hazards are specified in Annex A.
This document deals with all significant hazards, hazardous situations or hazardous events during all phases of the life of the truck (ISO 12100:2010, 5.4), as listed in Annex B, relevant to the applicable machines when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
It does not give requirements for additional hazards that can occur:
—     during operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields);
—     during operation in nuclear environments;
—     from trucks intended to operate in public zones (in particular ISO 13482);
—     during operation on a public road;
—     during operation in potentially explosive environments;
—     during operation in military applications;
—     during operation with specific hygienic requirements;
—     during operation in ionizing radiation environments;
—     during the transportation of (a) person(s) other than (the) intended rider(s);
—     when handling loads the nature of which can lead to dangerous situations (e.g. molten metals, acids/bases, radiating materials);
—     for rider positions with elevation function higher than 1 200 mm from the floor/ground to the platform floor.
This document does not contain safety requirements for trailer(s) being towed behind a truck.
This document does not contain safety requirements for elevated operator trucks.
This document is not applicable to trucks manufactured before the date of its publication.

Standard
94 pages
English language
sale 10% off
e-Library read for
1 day