Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:2023)

This document specifies a method of determining the apparent density, i.e. the mass per unit of volume, of loose material (powder or granular material) that can be poured from a funnel of specified design.
NOTE            For a method of determining the apparent density of loose moulding material that cannot be poured from a specified funnel, see ISO 61.

Kunststoffe - Bestimmung der scheinbaren Dichte von Formmassen, die durch einen gegebenen Trichter abfließen können (Schüttdichte) (ISO 60:2023)

Dieses Dokument legt ein Verfahren zur Bestimmung der scheinbaren Dichte, d. h. der Masse je Volumeneinheit, von losem Material (pulverförmiges oder granulatförmiges Material) (Schüttgut) fest, das aus einem Trichter mit festgelegter Konstruktion ausgegossen werden kann.
ANMERKUNG   Für ein Verfahren zur Bestimmung der scheinbaren Dichte (Stopfdichte) von losem Formmaterial, das nicht aus einem festgelegten Trichter ausgegossen werden kann, siehe ISO 61.

Plastiques - Détermination de la masse volumique apparente des matières susceptibles de s'écouler à travers un entonnoir donné (ISO 60:2023)

Le présent document spécifie une méthode de détermination de la masse volumique apparente, c’est-à-dire la masse par unité de volume, des matières non tassées (en poudre ou en granulés) susceptibles de s’écouler à travers un entonnoir d’un modèle déterminé.
NOTE            Pour une méthode de détermination de la masse volumique apparente des matières à mouler non tassées qui ne sont pas susceptibles de s’écouler à travers un entonnoir donné, voir l’ISO 61.

Polimerni materiali - Določanje nasipne mase materiala, ki se lahko nasipa skozi lij določenih mer (ISO 60:2023)

General Information

Status
Published
Publication Date
03-Oct-2023
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
04-Oct-2023
Completion Date
04-Oct-2023

Relations

Buy Standard

Standard
EN ISO 60:2023
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 60:2023
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 60:2023
01-december-2023
Polimerni materiali - Določanje nasipne mase materiala, ki se lahko nasipa skozi lij
določenih mer (ISO 60:2023)
Plastics - Determination of apparent density of material that can be poured from a
specified funnel (ISO 60:2023)
Kunststoffe - Bestimmung der scheinbaren Dichte von Formmassen, die durch einen
genormten Trichter abfließen können (Schüttdichte) (ISO 60:2023)
Plastiques - Détermination de la masse volumique apparente des matières susceptibles
de s'écouler à travers un entonnoir donné (ISO 60:2023)
Ta slovenski standard je istoveten z: EN ISO 60:2023
ICS:
83.080.10 Duromeri Thermosetting materials
SIST EN ISO 60:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 60:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 60:2023


EN ISO 60
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2023
EUROPÄISCHE NORM
ICS 83.080.10 Supersedes EN ISO 60:1999
English Version

Plastics - Determination of apparent density of material
that can be poured from a specified funnel (ISO 60:2023)
Plastiques - Détermination de la masse volumique Kunststoffe - Bestimmung der scheinbaren Dichte von
apparente des matières susceptibles de s'écouler à Formmassen, die durch einen genormten Trichter
travers un entonnoir donné (ISO 60:2023) abfließen können (Schüttdichte) (ISO 60:2023)
This European Standard was approved by CEN on 30 September 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 60:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 60:2023
EN ISO 60:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 60:2023
EN ISO 60:2023 (E)
European foreword
This document (EN ISO 60:2023) has been prepared by Technical Committee ISO/TC 61 "Plastics" in
collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2024, and conflicting national standards shall be
withdrawn at the latest by April 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 60:1999.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 60:2023 has been approved by CEN as EN ISO 60:2023 without any modification.


3

---------------------- Page: 5 ----------------------
SIST E
...

SLOVENSKI STANDARD
oSIST prEN ISO 60:2023
01-februar-2023
Polimerni materiali - Določanje nasipne mase materiala, ki se lahko nasipa skozi lij
določenih mer (ISO/DIS 60:2022)
Plastics - Determination of apparent density of material that can be poured from a
specified funnel (ISO/DIS 60:2022)
Kunststoffe - Bestimmung der scheinbaren Dichte von Formmassen, die durch einen
genormten Trichter abfließen können (Schüttdichte) (ISO/DIS 60:2022)
Plastiques - Détermination de la masse volumique apparente des matières susceptibles
de s'écouler à travers un entonnoir donné (ISO/DIS 60:2022)
Ta slovenski standard je istoveten z: prEN ISO 60
ICS:
83.080.10 Duromeri Thermosetting materials
oSIST prEN ISO 60:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 60:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 60:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 60
ISO/TC 61/SC 12 Secretariat: JISC
Voting begins on: Voting terminates on:
2022-12-07 2023-03-01
Plastics — Determination of apparent density of material
that can be poured from a specified funnel
Plastiques — Détermination de la masse volumique apparente des matières susceptibles de s'écouler à
travers un entonnoir donné
ICS: 83.080.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 60:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 60:2023
ISO/DIS 60:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 60
ISO/TC 61/SC 12 Secretariat: JISC
Voting begins on: Voting terminates on:

Plastics — Determination of apparent density of material
that can be poured from a specified funnel
Plastiques — Détermination de la masse volumique apparente des matières susceptibles de s'écouler à
travers un entonnoir donné
ICS: 83.080.10
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 60:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST prEN ISO 60:2023
ISO/DIS 60:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.