EN ISO 18541-3:2021
(Main)Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 3: Functional user interface requirements (ISO 18541-3:2021)
Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 3: Functional user interface requirements (ISO 18541-3:2021)
This document includes functional user interface requirements related to automotive repair and maintenance information (RMI) systems in order to standardize access to RMI for independent operators.
This document specifies all functional user interface requirements related to a vehicle manufacturer's RMI system. These requirements will reflect the deriving needs from the use cases as specified in ISO 18541‑1.
Straßenfahrzeuge - Standardisierter Zugang zu Reparatur- und Wartungsinformationen (RMI) - Teil 3: Anforderungen an die funktionale Nutzerschnittstelle (ISO 18541-3:2021)
Dieses Dokument umfasst Anforderungen an die funktionale Nutzerschnittstelle in Bezug auf Reparatur- und Wartungsinformationssysteme (RMI), die der Standardisierung des Zugangs zu RMI durch unabhängige Marktteilnehmer dienen.
In diesem Dokument sind alle Anforderungen an die funktionale Nutzerschnittstelle festgelegt, die sich auf das RMI-System eines Fahrzeugherstellers beziehen. Diese Anforderungen spiegeln die Bedürfnisse wider, die von denen in ISO 18541-1 beschriebenen Anwendungsfällen abgeleitet sind.
Véhicules routiers - Normalisation de l'accès aux informations relatives à la réparation et à la maintenance pour l'automobile (RMI) - Partie 3: Exigences fonctionnelles relatives à l’interface utilisateur (ISO 18541-3:2021)
Le présent document contient les exigences fonctionnelles relatives à l'interface utilisateur liées aux systèmes d'information sur la réparation et la maintenance des véhicules (RMI) dans le but de normaliser l'accès des opérateurs indépendants aux RMI.
Le présent document spécifie toutes les exigences fonctionnelles relatives à l'interface utilisateur associée au système RMI d'un constructeur de véhicules. Ces exigences reflèteront les besoins qui découlent des cas d'utilisation spécifiés dans l'ISO 18541‑1.
Cestna vozila - Standardiziran dostop do informacij o popravilih in vzdrževanju avtomobilov (RMI) - 3. del: Zahteve za funkcionalni uporabniški vmesnik (ISO 18541-3:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 18541-3:2021
01-september-2021
Nadomešča:
SIST EN ISO 18541-3:2015
Cestna vozila - Standardiziran dostop do informacij o popravilih in vzdrževanju
avtomobilov (RMI) - 3. del: Zahteve za funkcionalni uporabniški vmesnik (ISO
18541-3:2021)
Road vehicles - Standardized access to automotive repair and maintenance information
(RMI) - Part 3: Functional user interface requirements (ISO 18541-3:2021)
Straßenfahrzeuge - Standardisierter Zugang zu Reparatur- und Wartungsinformationen
(RMI) - Teil 3: Anforderungen an die funktionale Nutzerschnittstelle (ISO 18541-3:2021)
Véhicules routiers - Normalisation de l'accès aux informations relatives à la réparation et
à la maintenance pour l'automobile (RMI) - Partie 3: Exigences fonctionnelles relatives à
l’interface utilisateur (ISO 18541-3:2021)
Ta slovenski standard je istoveten z: EN ISO 18541-3:2021
ICS:
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
43.180 Diagnostična, vdrževalna in Diagnostic, maintenance and
preskusna oprema test equipment
SIST EN ISO 18541-3:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 18541-3:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 18541-3:2021
EN ISO 18541-3
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2021
EUROPÄISCHE NORM
ICS 43.180; 43.040.15 Supersedes EN ISO 18541-3:2014
English Version
Road vehicles - Standardized access to automotive repair
and maintenance information (RMI) - Part 3: Functional
user interface requirements (ISO 18541-3:2021)
Véhicules routiers - Normalisation de l'accès aux Straßenfahrzeuge - Standardisierter Zugang zu
informations relatives à la réparation et à la Reparatur- und Wartungsinformationen (RMI) - Teil 3:
maintenance pour l'automobile (RMI) - Partie 3: Anforderungen an die funktionale Nutzerschnittstelle
Exigences fonctionnelles relatives à l'interface (ISO 18541-3:2021)
utilisateur (ISO 18541-3:2021)
This European Standard was approved by CEN on 1 June 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18541-3:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 18541-3:2021
EN ISO 18541-3:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 18541-3:2021
EN ISO 18541-3:2021 (E)
European foreword
This document (EN ISO 18541-3:2021) has been prepared by Technical Committee ISO/TC 22 "Road
vehicles" in collaboration with Technical Committee CEN/TC 301 “Road vehicles” the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2021, and conflicting national standards
shall be withdrawn at the latest by December 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 18541-3:2014.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.