Explosives for civil uses - Detonators and detonating cord relays - Part 16: Determination of delay accuracy

This document specifies a method for determining the delay time accuracy of electric detonators, non-electric detonators, surface connectors and detonating cord relays with pyrotechnic delay elements.
This document applies to explosives for civil uses.
NOTE The method for determining the delay time accuracy for electronic initiation systems is included in prEN 13763-27.

Explosivstoffe für zivile Zwecke - Zünder und Sprengschnurverbinder - Teil 16: Bestimmung der Verzögerungsgenauigkeit

Dieses Dokument legt ein Verfahren für die Bestimmung der Verzögerungsgenauigkeit von elektrischen Zündern, nichtelektrischen Zündern, Oberflächenverbindern und Sprengschnurverzögerern mit pyrotechnischen Verzögerungselementen fest.
Dieses Dokument gilt für Explosivstoffe für zivile Zwecke.
ANMERKUNG   Das Verfahren für die Bestimmung der Verzögerungsgenauigkeit von elektronischen Zündsystemen ist in prEN 13763 27 beschrieben.

Explosifs à usage civil - Détonateurs et relais pour cordeau détonant - Partie 16 : Détermination de la précision du retard

Le présent document spécifie une méthode visant à déterminer la précision du retard des détonateurs électriques, des détonateurs non électriques, des connecteurs de surface et des relais pour cordeau détonant avec éléments pyrotechniques.
Le présent document s’applique aux explosifs à usage civil.
NOTE La méthode de détermination de la précision du retard pour les systèmes d’amorçage électroniques est incluse dans le prEN 13763 27.

Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 16. del: Ugotavljanje časa zakasnitve

General Information

Status
Not Published
Publication Date
29-May-2023
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
20-Dec-2023
Due Date
24-Jul-2021
Completion Date
20-Dec-2023

Relations

Buy Standard

Draft
prEN 13763-16:2021
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13763-16:2021
01-april-2021
Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 16. del: Ugotavljanje
časa zakasnitve
Explosives for civil uses - Detonators and relays - Part 16: Determination of delay
accuracy
Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 16:
Bestimmung der Verzögerungsgenauigkeit
Explosifs à usage civil - Détonateurs et relais - Partie 16 : Détermination de la précision
du retard
Ta slovenski standard je istoveten z: prEN 13763-16
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 13763-16:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13763-16:2021

---------------------- Page: 2 ----------------------
oSIST prEN 13763-16:2021


DRAFT
EUROPEAN STANDARD
prEN 13763-16
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2021
ICS 71.100.30 Will supersede EN 13763-16:2003
English Version

Explosives for civil uses - Detonators and detonating cord
relays - Part 16: Determination of delay accuracy
Explosifs à usage civil - Détonateurs et relais pour Explosivstoffe für zivile Zwecke - Zünder und
cordeau détonant - Partie 16: Détermination de la Sprengschnurverbinder - Teil 16: Bestimmung der
précision du retard Verzögerungsgenauigkeit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13763-16:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13763-16:2021
prEN 13763-16:2021 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Principle . 6
5 Apparatus . 6
6 Preparation and handling of test samples and test pieces . 7
7 Procedure . 7
7.1 Conditioning . 7
7.2 Electric detonators .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.