prEN 3660-003

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A - Product standard

This document defines a range of grommet nuts, style A, for use under the following conditions:
Associated electrical connector(s):   EN 3660-002
Temperature range,   Class N:   -65 °C to 200 °C
Class W:   -65 °C to 175 °C
Class K:   -65 °C to 260 °C
Class A:   -65 °C to 200 °C
Class T:   -65 °C to 175 °C
Class Z:   -65 °C to 175 °C

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 003: Dichtungsmutter, Bauform A - Produktnorm

No Scope available

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 003 : Écrou de passe-fil, type A - Norme de produit

Le présent document définit une gamme d'écrous de passe-fil, de type A, destinés à être utilisés dans les conditions ci-après :
Connecteur(s) électrique(s) associé(s) :   EN 3660-002
Plage de températures,   Classe N   : -65 °C à 200 °C
Classe W   : -65 °C à 175 °C
Classe K   : -65 °C à 260 °C
Classe A   : -65 °C à 200 °C
Classe T   : -65 °C à 175 °C
Classe Z   : -65 °C à 175 °C

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 003. del: Tesnilna matica, tip A - Standard za proizvod

General Information

• Status: Withdrawn
• Publication Date: 13-Mar-2022
• Withdrawal Date: 12-Jun-2022
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 03-Feb-2023
• Completion Date: 03-Feb-2023
• Ref Project: oSIST prEN 3660-003:2020 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A - Product standard

Relations

• Revises: EN 3660-003:2018 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A - Product standard
• Effective Date: 27-Feb-2019

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3660-003:2020
01-september-2020

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje -

003. del: Tesnilna matica, tip A - Standard za proizvod

Aerospace series - Cable outlet accessories for circular and rectangular electrical and

optical connectors - Part 003: Grommet nut, style A - Product standard
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und
Rechtecksteckverbinder - Teil 003: Dichtungsmutter, Bauform A - Produktnorm

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires

électriques et optiques - Partie 003 : Écrou de passe-fil, type A - Norme de produit

Ta slovenski standard je istoveten z: prEN 3660-003
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3660-003:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3660-003:2020
---------------------- Page: 2 ----------------------
oSIST prEN 3660-003:2020
DRAFT
EUROPEAN STANDARD
prEN 3660-003
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2020
ICS 49.060 Will supersede EN 3660-003:2018
English Version
Aerospace series - Cable outlet accessories for circular and
rectangular electrical and optical connectors - Part 003:
Grommet nut, style A - Product standard

Série aérospatiale - Accessoires arrière pour Luft- und Raumfahrt - Endgehäuse für elektrische und

connecteurs circulaires et rectangulaires électriques et optische Rund- und Rechtecksteckverbinder - Teil 003:

optiques - Partie 003 : Écrou serre-fils, type A - Norme Dichtungsmutter, Bauform A - Produktnorm

de produit

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-

STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3660-003:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 3660-003:2020
prEN 3660-003:2020 (E)
Contents Page

European foreword ............................................................................................................................................ 3

1 Scope .......................................................................................................................................................... 4

2 Normative references .......................................................................................................................... 4

3 Terms and definitions ......................................................................................................................... 4

4 Characteristics ....................................................................................................................................... 4

4.1 Dimensions and mass .......................................................................................................................... 4

4.2 Interface dimensions ........................................................................................................................... 6

4.2.1 Associated connection ......................................................................................................................... 6

4.2.2 Front interface ....................................................................................................................................... 6

4.3 Material and finish ................................................................................................................................ 7

4.4 Assembly torque .................................................................................................................................... 8

4.5 Coupling thread strength torque ..................................................................................................... 8

4.6 Tests ........................................................................................................................................................... 8

5 Designation ........................................................................................................................................... 11

6 Marking ................................................................................................................................................... 11

7 Technical specification ..................................................................................................................... 11

---------------------- Page: 4 ----------------------
oSIST prEN 3660-003:2020
prEN 3660-003:2020 (E)
European foreword

This document (prEN 3660-003:2020) has been prepared by the Aerospace and Defence Industries

Association of Europe – Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of

ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 3660-003:2018.
---------------------- Page: 5 ----------------------
oSIST prEN 3660-003:2020
prEN 3660-003:2020 (E)
1 Scope

This document defines a range of grommet nuts, style A, for use under the following conditions:

Associated electrical connector(s) : EN 3660-002
Temperature range, Class N: −65 °C to 200 °C
Class W: −65 °C to 175 °C
Class K: −65 °C to 260 °C
Class A: −65 °C to 200 °C
Class T: −65 °C to 175 °C
Class Z: −65 °C to 175 °C
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this docume
...