EN 363:2008
(Main)Personal fall protection equipment - Personal fall protection systems
Personal fall protection equipment - Personal fall protection systems
This European Standard specifies the general characteristics and assembly of personal fall protection systems. It gives examples for the specific types of personal fall protection systems and describes how components may be assembled into systems.
Persönliche Absturzschutzausrüstung - Persönliche Absturzschutzsysteme
Diese Europäische Norm legt die allgemeinen Merkmale und die Zusammenstellung von persönlichen
Absturzschutzsystemen fest. Sie enthält Beispiele für die speziellen Arten von persönlichen
Absturzschutzsystemen und beschreibt, wie Bestandteile zu Systemen zusammengestellt werden können.
Equipement de protection individuelle contre les chutes de hauteur - Systèmes d'arrêt des chutes
La présente Norme européenne spécifie les caractéristiques générales et l’assemblage des systèmes de
protection individuelle contre les chutes. Elle donne des exemples de types spécifiques de systèmes de
protection individuelle contre les chutes et décrit comment les composants peuvent être assemblés pour
constituer ces systèmes.
Osebna varovalna oprema za zaščito pred padci z višine - Sistemi za osebno zaščito pred padci z višine
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Personal fall protection equipment - Personal fall protection systemsÉquipement de protection individuelle contre les chutes - Systemes de protection individuelle contre les chutesPersönliche Schutzausrüstung gegen Absturz - Persönliches AbsturzsicherungssystemTa slovenski standard je istoveten z:EN 363:2008SIST EN 363:2008en,fr,de13.340.60ICS:SLOVENSKI
STANDARDSIST EN 363:200801-maj-2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 363February 2008ICS 13.340.60Supersedes EN 363:2002
English VersionPersonal fall protection equipment - Personal fall protectionsystemsEquipement de protection individuelle contre les chutes dehauteur - Systèmes d'arrêt des chutesPersönliche Absturzschutzausrüstung - PersönlicheAbsturzschutzsystemeThis European Standard was approved by CEN on 14 December 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 363:2008: E
Figures Figure 1 — Example of a restraint system.7 Figure 2 — Example of a work positioning system.8 Figure 3 — Example of a work positioning system incorporating a pole strap.9 Figure 4 — Example of a rope access system.10 Figure 5 — Example of a fall arrest system incorporating a lanyard and energy absorber.11 Figure 6 — Example of a fall arrest system incorporating a lanyard and energy absorber on a
horizontal anchor line.12 Figure 7 — Example of a fall arrest system incorporating a retractable type fall arrester.12 Figure 8 — Example of a fall arrest system incorporating a guided type fall arrester including a rigid
anchor line.13 Figure 9 — Example of a fall arrest system incorporating a guided type fall arrester including a flexible
anchor line.13 Figure 10 — Example of a rescue system incorporating a descender device.14 Figure
11— Example of a rescue system incorporating a rescue lifting device.15
A rope access system may be used for work positioning or rescue. 3.2.1.4 fall arrest system personal fall protection system which limits the impact force on the body of the user during fall arrest 3.2.1.5 rescue system personal fall protection system by which a person can rescue themselves or others, in such a way that a free fall is prevented 3.3 General terms 3.3.1 element part of a component NOTE Ropes, webbing, attachment elements and fittings are examples of elements. 3.3.2 component part of a system at a point of sale by the manufacturer, supplied with packaging, marking and information supplied by the manufacturer NOTE Harnesses and lanyards are examples of components.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.