EN 1410:2008

Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides

This European Standard is applicable to cationic polyacrylamides used for treatment water intended for human consumption. It describes the characteristics of cationic polyacrylamides and specifies the requirements and the corresponding test methods for cationic polyacrylamides. It gives information on their use in water treatment.

Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Kationische Polyacrylamide

Diese Europäische Norm gilt für kationische Polyacrylamide zur Aufbereitung von Wasser für den mensch¬lichen Gebrauch. Sie beschreibt die Eigenschaften von kationischen Polyacrylamiden und legt die Anforde¬rungen sowie die entsprechenden Prüfverfahren für kationische Polyacrylamide fest. Sie gibt Informationen für ihre Anwendung in der Wasseraufbereitung.

Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation humaine - Polyacrylamides cationiques

La présente Norme européenne est applicable aux polyacrylamides cationiques utilisés pour le traitement de
l'eau destinée à la consommation humaine. Elle décrit les caractéristiques des polyacrylamides cationiques et
spécifie les exigences et les méthodes d'essais correspondantes pour les polyacrylamides cationiques. Elle
donne des informations pour leur emploi dans le traitement de l'eau.

Kemikalije, ki se uporabljajo za pripravo pitne vode - Kationski poliakrilamidi

General Information

• Status: Withdrawn
• Publication Date: 29-Jan-2008
• Withdrawal Date: 10-Oct-2023
• ICS: 71.100.80 - Chemicals for purification of water
• Technical Committee: CEN/TC 164 - Water supply
• Drafting Committee: CEN/TC 164/WG 9 - Drinking water treatment
• Ref Project: SIST EN 1410:2008 - Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides

Relations

• Replaces: EN 1410:1998 - Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides
• Effective Date: 22-Dec-2008
• Replaced By: EN 1410:2023 - Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides
• Effective Date: 07-Jul-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kemikalije, ki se uporabljajo za pripravo pitne vode - Kationski poliakrilamidiProdukte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Kationische PolyacrylamideProduits chimiques utilisés pour le traitement de l'eau destinée à la consommation humaine - Polyacrylamides cationiquesChemicals used for treatment of water intended for human consumption - Cationic polyacrylamides71.100.80Chemicals for purification of water13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 1410:2008SIST EN 1410:2008en,fr,de01-april-2008SIST EN 1410:2008SLOVENSKI
STANDARDSIST EN 1410:19991DGRPHãþD



SIST EN 1410:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1410January 2008ICS 71.100.80Supersedes EN 1410:1998
English VersionChemicals used for treatment of water intended for humanconsumption - Cationic polyacrylamidesProduits chimiques utilisés pour le traitement de l'eaudestinée à la consommation humaine - PolyacrylamidescationiquesProdukte zur Aufbereitung von Wasser für denmenschlichen Gebrauch - Kationische PolyacrylamideThis European Standard was approved by CEN on 10 November 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1410:2007: ESIST EN 1410:2008



EN 1410:2008 (E) 2 Contents Page Foreword.4 Introduction.5 1 Scope.6 2 Normative references.6 3 Description.6 3.1 Identification.6 3.1.1 Chemical names.6 3.1.2 Synonym or common name.6 3.1.3 Relative molecular mass.6 3.1.4 Empirical formula.6 3.1.5 Chemical formulae.7 3.1.6 CAS Registry Numbers .7 3.1.7 EINECS reference .8 3.1.8 Commercial form.8 3.2 Physical properties.
...