EN 13451-1:2011

Swimming pool equipment - Part 1: General safety requirements and test methods

This European Standard specifies general safety requirements and test methods for equipment used in classified swimming pools as specified in EN 15288-1 and EN 15288-2.
Where specific standards exist, this general standard should not be used alone.
Special care is required in applying this general standard alone to equipment for which no product specific standard has yet been published.

Schwimmbadgeräte - Teil 1: Allgemeine sicherheitstechnische Anforderungen und Prüfverfahren

Diese Europäische Norm legt allgemeine sicherheitstechnische Anforderungen und Prüfverfahren für Geräte fest, die in nach EN 15288-1 und EN 15288-2 in klassifizierten Schwimmbädern benutzt werden. Wenn besondere Normen vorhanden sind, sollte diese allgemeine Norm nicht allein verwendet werden. Besondere Aufmerksamkeit ist erforderlich, wenn diese allgemeine Norm allein auf Geräte angewendet wird, für die noch keine produktspezifische Norm veröffentlicht wurde.

Equipement de piscine - Partie 1 : Exigences générales de sécurité et méthodes d'essai

La présente Norme européenne spécifie des exigences de sécurité et des méthodes d'essai générales pour
un équipement utilisé dans des piscines classées telles que spécifiées dans l'EN 15288-1 et l’EN 15288-2.
Lorsqu'il existe des normes spécifiques, il convient de ne pas utiliser la présente norme seule.
Il est nécessaire de prendre les précautions nécessaires lors de l'application de la présente norme générale
seule pour un équipement pour lequel aucune norme spécifique à ce produit n'a encore été publiée.

Oprema za plavalne bazene - 1. del: Splošne varnostne zahteve in preskusne metode

Ta standard določa splošne varnostne zahteve in preskusne metode za opremo, ki se uporablja pri javnih vodnih aktivnostih in nekaterih z vodo povezanih aktivnostih. Za določene vrste opreme so te zahteve dopolnjene ali spremenjene z zahtevami naknadnih, s proizvodnjo povezanih delov tega standarda. Kjer obstaja določen standard, se ta splošni standard ne sme uporabljati sam.

General Information

• Status: Withdrawn
• Publication Date: 06-Sep-2011
• Withdrawal Date: 11-Oct-2016
• ICS: 97.220.10 - Sports facilities
• Technical Committee: CEN/TC 136 - Sports, playground and other recreational equipment
• Drafting Committee: CEN/TC 136/WG 8 - Swimming pool equipment
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 12-Oct-2016
• Completion Date: 12-Oct-2016
• Ref Project: SIST EN 13451-1:2011 - Swimming pool equipment - Part 1: General safety requirements and test methods

Relations

• Replaces: EN 13451-1:2001 - Swimming pool equipment - Part 1: General safety requirements and test methods
• Effective Date: 10-Sep-2011
• Merged Into: EN 13451-1:2011+A1:2016 - Swimming pool equipment - Part 1: General safety requirements and test methods
• Effective Date: 19-Jan-2023
• Amended By: EN 13451-1:2011/prA1 - Swimming pool equipment - Part 1: General safety requirements and test methods
• Effective Date: 28-Jun-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema za plavalne bazene - 1. del: Splošne varnostne zahteve in preskusne metodeSchwimmbadgeräte - Teil 1: Allgemeine sicherheitstechnische Anforderungen und PrüfverfahrenEquipement de piscine - Partie 1: Exigences générales de sécurité et méthodes d'essaiSwimming pool equipment - Part 1: General safety requirements and test methods97.220.10Športni objektiSports facilitiesICS:Ta slovenski standard je istoveten z:EN 13451-1:2011SIST EN 13451-1:2011en,fr,de01-december-2011SIST EN 13451-1:2011SLOVENSKI
STANDARDSIST EN 13451-1:20021DGRPHãþD



SIST EN 13451-1:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13451-1
September 2011 ICS 97.220.10 Supersedes EN 13451-1:2001English Version
Swimming pool equipment -Part 1: General safety requirements and test methods
Equipement de piscine - Partie 1: Exigences générales de sécurité et méthodes d'essai
Schwimmbadgeräte - Teil 1: Allgemeine sicherheitstechnische Anforderungen und Prüfverfahren This European Standard was approved by CEN on 29 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13451-1:2011: ESIST EN 13451-1:2011



EN 13451-1:2011 (E) 2 Contents Page Foreword .31Scope .52Normative references .53Terms and definitions .54Safety requirements .84.1Structural integrity .84.2Minimum space .94.3Handrails, barriers, safety barriers .94.4Surfaces . 114.5Protrusions . 114.6Edges and corners. 124.7Entrapment, crushing and shearing points . 134.8Slip resistance . 144.9Fittings . 144.10Removable protection devices . 154.11Alteration of existing equipment . 155Test methods .
...