EN ISO 20701:2024
(Main)Leather - Tests for colour fastness - Colour fastness to saliva (ISO 20701:2024)
Leather - Tests for colour fastness - Colour fastness to saliva (ISO 20701:2024)
This document specifies a method for determining the colour fastness to saliva of all kinds of leathers, independent of the colouring procedure applied.
The method uses an artificial saliva solution to simulate whether colouring materials can migrate from leather to the mouth or to the mucous membranes.
Leder - Prüfung der Farbechtheit - Farbechtheit gegenüber Speichel (ISO 20701:2024)
Dieses Dokument legt ein Verfahren zur Bestimmung der Farbechtheit gegen Speichel bei allen Lederarten unabhängig vom Färbevorgang fest.
Das Verfahren nutzt eine künstliche Speichellösung, um zu simulieren, ob Farbstoffe vom Leder zum Mund oder zu den Schleimhäuten migrieren können.
Cuir - Essais de solidité des coloris - Solidité des coloris à la salive (ISO 20701:2024)
Le présent document spécifie une méthode permettant de déterminer la solidité des coloris à la salive, destinée à tous les types de cuirs, quelle que soit la technique de teinture utilisée.
Cette méthode consiste à utiliser une solution de salive artificielle afin de déterminer si les matières colorantes peuvent migrer du cuir vers la bouche ou les muqueuses.
Usnje - Preskušanje barvne obstojnosti - Barvna obstojnost na slino (ISO 20701:2024)
Standard ISO 20701 | IUF 427:2017 določa metodo za ugotavljanje barvne obstojnosti na slino za usnje vseh vrst, neodvisno od uporabljenega postopka obarvanja.
Metoda uporablja raztopino umetne sline za simulacijo, s katero se ugotavlja, ali se lahko barvni materiali prenesejo iz usnja v usta ali sluznico.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2024
Usnje - Preskušanje barvne obstojnosti - Barvna obstojnost na slino (ISO
20701:2024)
Leather - Tests for colour fastness - Colour fastness to saliva (ISO 20701:2024)
Leder - Prüfung der Farbechtheit - Farbechtheit gegenüber Speichel (ISO 20701:2024)
Cuir - Essais de solidité des coloris - Solidité des coloris à la salive (ISO 20701:2024)
Ta slovenski standard je istoveten z: EN ISO 20701:2024
ICS:
59.140.30 Usnje in krzno Leather and furs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 20701
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2024
EUROPÄISCHE NORM
ICS 59.140.30 Supersedes EN ISO 20701:2018
English Version
Leather - Tests for colour fastness - Colour fastness to
saliva (ISO 20701:2024)
Cuir - Essais de solidité des coloris - Solidité des coloris Leder - Prüfung der Farbechtheit - Farbechtheit
à la salive (ISO 20701:2024) gegenüber Speichel (ISO 20701:2024)
This European Standard was approved by CEN on 16 August 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20701:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 20701:2024) has been prepared by Technical Committee IULTCS "International
Union of Leather Technologists and Chemists Societies" in collaboration with Technical Committee
CEN/TC 289 “Leather” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2025, and conflicting national standards
shall be withdrawn at the latest by February 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 20701:2018.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 20701:2024 has been approved by CEN as EN ISO 20701:2024 without any modification.
International
Standard
ISO
IULTCS
IUF 427
Second edition
Leather — Tests for colour fastness
2024-08
— Colour fastness to saliva
Cuir — Essais de solidité des coloris — Solidité des coloris à la salive
Reference numbers
ISO 20701:2024(en)
IULTCS/IUF 427:2024(en) © ISO 2024
ISO 20701:2024(en)
IULTCS/IUF 427:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 20701:2024(en)
IULTCS/IUF 427:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus and materials . 2
6 Reagents . 2
7 Leather specimen and test pieces . 3
8 Procedure . 3
9 Ev a luat ion . 3
10 Precision . 4
11 Test report . 4
iii
ISO 20701:2024(en)
IULTCS/IUF 427:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in thi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.