EN 15947-4:2022

Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods

This document specifies test methods. It is applicable to fireworks of the categories F1, F2 and F3 as defined by Article 6 Paragraph (1) clause (a) subclause (i) to (iii) of Directive 2013/29/EU.

Pyrotechnische Gegenstände - Feuerwerkskörper, Kategorien F1, F2 und F3 - Teil 4: Prüfverfahren

Dieses Dokument legt Prüfverfahren fest. Es ist auf Feuerwerkskörper der Kategorien F1, F2 und F3 anwendbar, wie nach Artikel 6, Absatz (1), Abschnitt (a), Unterabschnitte (i) bis (iii) der Richtlinie 2013/29/EU festgelegt.

Articles pyrotechniques - Artifices de divertissement, Catégories F1, F2 et F3 - Partie 4 : Méthodes d'essai

Le présent document spécifie des méthodes d’essai. Il s’applique aux artifices de divertissement de catégories F1, F2 et F3, tels que définis par l’Article 6, paragraphe (1), alinéa (a), points (i) à (iii) de la Directive 2013/29/UE.

Pirotehnični izdelki - Ognjemetni izdelki, kategorije F1, F2 in F3 - 4. del: Preskusne metode

General Information

• Status: Published
• Publication Date: 04-Oct-2022
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 212 - Fireworks
• Drafting Committee: CEN/TC 212/WG 1 - Classification and terminology
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 05-Oct-2022
• Due Date: 01-May-2020
• Completion Date: 05-Oct-2022
• Directive: 2013/29/EU - Directive 2013/29/EU of the European Parliament and of the Council of 12 June 2013 on the harmonisation of the laws of the Member States relating to the making available on the market of pyrotechnic articles (recast)
• Mandate: M/416 - Standardization mandate assigned to CEN concerning pyrotechnic articles
• Mandate: M/504 - Standardisation mandate assigned to CEN under Directive 2007/23/EC on pyrotechnic articles with a view to Amendment of standard EN 15947: Fireworks, Categories 1,2 and 3
• Mandate: M/583 - Standardisation request to the European Committee for Standardisation as regards pyrotechnic articles in support of Directive 2013/29/EU of the European Parliament and of the Council
• Ref Project: SIST EN 15947-4:2022 - Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods

Relations

• Replaces: EN 15947-4:2015 - Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
• Effective Date: 06-Dec-2017
• Revised: EN 15947-3:2015 - Pyrotechnic articles - Fireworks, Categories F1, F2, and F3 - Part 3: Minimum labelling requirements
• Effective Date: 21-Nov-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 15947-4:2022
01-december-2022
Nadomešča:
SIST EN 15947-4:2016
Pirotehnični izdelki - Ognjemetni izdelki, kategorije F1, F2 in F3 - 4. del: Preskusne
metode
Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
Pyrotechnische Gegenstände - Feuerwerkskörper, Kategorien F1, F2 und F3 - Teil 4:
Prüfverfahren
Articles pyrotechniques - Artifices de divertissement, Catégories F1, F2 et F3 - Partie 4:
Méthodes d'essai
Ta slovenski standard je istoveten z: EN 15947-4:2022
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
SIST EN 15947-4:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 15947-4:2022

---------------------- Page: 2 ----------------------
SIST EN 15947-4:2022


EN 15947-4
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2022
EUROPÄISCHE NORM
ICS 71.100.30 Supersedes EN 15947-4:2015
English Version

Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 -
Part 4: Test methods
Articles pyrotechniques - Artifices de divertissement, Pyrotechnische Gegenstände - Feuerwerkskörper,
Catégories F1, F2 et F3 - Partie 4 : Méthodes d'essai Kategorien F1, F2 und F3 - Teil 4: Prüfverfahren
This European Standard was approved by CEN on 8 August 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15947-4:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 15947-4:2022
EN 15947-4:2022 (E)
Contents Page
European foreword . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Test environment . 6
4.1 General. 6
4.2 Indoor . 6
4.3 Outdoor. 7
4.3.1 General. 7
4.3.2 Category F1. 7
4.3.3 Category F2. 7
4.3.4 Category F3.
...