iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 201:1997/A2:2005

(Amendment)

Plastics and rubber machines - Injection moulding machines - Safety requirements

Plastics and rubber machines - Injection moulding machines - Safety requirements

To extend the scope of injection moulding machines for the processing of plascis and/or rubber to electric ones that have recently been introduced into the European market.

Kunststoff- und Gummimaschinen - Spritzgießmaschinen - Sicherheitsanforderungen

Machines pour le caoutchouc et les matières plastiques - Machines à injecter - Prescriptions de sécurité

Stroji za predelavo gume in plastike – Stroji za brizgalno vlivanje – Varnostne zahteve – Dopolnilo A2

General Information

Status
Withdrawn
Publication Date
26-Jul-2005
Withdrawal Date
20-Oct-2009
ICS
83.200 - Equipment for the rubber and plastics industries
Technical Committee
CEN/TC 145 - Rubber and plastics machines - Safety
Drafting Committee
CEN/TC 145 - Rubber and plastics machines - Safety
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
21-Oct-2009
Completion Date
21-Oct-2009
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
SIST EN 201:2000/A2:2005 - Plastics and rubber machines - Injection moulding machines - Safety requirements

Relations

Replaced By
EN 201:2009 - Plastics and rubber machines - Injection moulding machines - Safety requirements
Effective Date
24-Oct-2009
Amends
EN 201:1997 - Rubber and plastics machines - Injection moulding machines - Safety requirements
Effective Date
08-Jun-2022

Buy Standard

EN 201:2000/A2:2005EN 201:2000/A2:2005
PreviousNext
Amendment
EN 201:2000/A2:2005
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 201:2000/A2:2005
01-november-2005
Stroji za predelavo gume in plastike – Stroji za brizgalno vlivanje – Varnostne
zahteve – Dopolnilo A2
Plastics and rubber machines - Injection moulding machines - Safety requirements
Kunststoff- und Gummimaschinen - Spritzgießmaschinen - Sicherheitsanforderungen
Machines pour le caoutchouc et les matieres plastiques - Machines a injecter -
Prescriptions de sécurité
Ta slovenski standard je istoveten z: EN 201:1997/A2:2005
ICS:
83.200 Oprema za gumarsko Equipment for the rubber and
industrijo in industrijo plastics industries
polimernih materialov
SIST EN 201:2000/A2:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 201:1997/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2005
ICS 83.200
English version
Plastics and rubber machines - Injection moulding machines -
Safety requirements
Machines pour le caoutchouc et les matières plastiques - Kunststoff- und Gummimaschinen - Spritzgießmaschinen -
Machines à injecter - Prescriptions de sécurité Sicherheitsanforderungen
This amendment A2 modifies the European Standard EN 201:1997; it was approved by CEN on 20 June 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 201:1997/A2:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 201:1997/A2:2005 (E)
Contents Page
Foreword .3
2 Normative references.4
3 Terms and definitions.4
4 List of significant hazards.4
5 Safety requirements and/or protective measures .5
6 Verification of safety requirements and/or measures.8
7 Information for use .9
Annex A (normative) Additional requirements for protection devices type III .10
Annex G (normative) Interlocking of guards for injection moulding machines with one or more
electrical axes .11
G.1 Principle of interlocking corresponding to type III, using electromechanical components.11
G.2 Principle of interlocking corresponding to type III, using one electromechanical

component and the motor control unit .12
G.3 Principle of interlocking corresponding to type III, using the motor control unit.13
G.4 Principle of interlocking corresponding to type I, using one electromechanical
component.14
G.5 Principle of interlocking corresponding to type I, using the motor control unit.15
G.6 Principle of interlocking corresponding to type II, using one electromechanical
component.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1417:2023(Main)
Plastics and rubber machines - Two-roll mills - Safety requirements
SIST EN 1417:2024

This document deals with all significant hazards, hazardous situations or hazardous events relevant to two-roll mills for the processing of rubber and/or plastics (see Annex A), when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer during all the phases of the life of the machine as described in EN ISO 12100:2010, 5.4.
This document covers two-roll mills as defined in 3.1.
This document covers two-roll mills intended to be used in normal production and two-roll mills intended to be used in laboratories (testing of mixtures by batchwise processing of small amounts, not continuously).
This document is applicable to the following ancillary equipment as integral part of the machine:
-   powered stock guides;
-   strip cutting device;
-   stock blender;
-   recovery conveyor belt;
-   retractable ploughs;
-   secondary roller;
-   supply of heating and/or cooling fluids.
This document does not apply to the design of a local exhaust ventilation system that might be necessary in specific applications of the machine not known by the manufacturer.
This document does not apply to two-roll mills manufactured before the date of its publication as a European Standard.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23582-1:2023(Main)
Plastics and rubber machines - Clamping systems - Part 1: Safety requirements for magnetic clamping systems (ISO 23582-1:2023)
SIST EN ISO 23582-1:2023

This document specifies the essential safety requirements for the design, the construction and the integration of magnetic clamping systems (MCS) for plastics and rubber machines (e.g. injection moulding machines, compression moulding machines) and provides operational limits and information for their safe use.
This document deals with the basic hazards, hazardous situations or hazardous events that are listed in Annex A, when an MCS is used utilizing magnetic force to affix a mould to the platen of a machine in which it is integrated, and provides requirements to eliminate or adequately reduce the risks associated with these hazards taking into consideration conditions of misuse that are reasonably foreseeable by the manufacturer.
This document also specifies requirements for the MCS when integrated into a machine. This document does not deal specifically with hazards associated with production processes or other processes (e.g. horizontal or vertical injection moulding processes). Other standards can be applicable to these process hazards.
This document does not cover hydraulic, pneumatic or mechanical clamping systems.
This document is not applicable to MCS manufactured before the date of its publication.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12012-4:2019+A1:2021(Main)
Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
SIST EN 12012-4:2019+A1:2021

This document deals with all significant hazards, hazardous situations and events relevant to agglomerators for the modification of plastic scraps in its form, size and flow characteristics, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). The hazards have been identified taking into account all phases of the machine life cycle according to EN ISO 12100:2010, 5.4.
Machines considered in this document begin at the outer edge of the feed opening and end at the outer edge of the discharge opening.
This document does not deal with:
-   hazards due to emissions by processing materials that could be hazardous to health;
-   hazards caused by ignition of flammable residues in material to be processed;
-   requirements for exhaust ventilation systems.
This document is not applicable to agglomerators manufactured before the date of its publication.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12301:2019/AC:2021(Corrigendum)
Plastics and rubber machines - Calenders - Safety requirements
SIST EN 12301:2020/AC:2021

This document specifies safety requirements relating to the design and construction of calenders (see 3.1.1) intended for the calendering, polishing, laminating or embossing of rubber or plastics.
This document concerns the calender alone, including the following integrated components: cutting device, stock guides and feeding device, secondary roller.
Annex C shows examples of various types of calenders and Annex D shows examples of calendaring processes.
This document deals with all significant hazards, hazardous situations or hazardous events relevant to the design and construction of calenders, when the machines are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer during all the phases of the life of the machine as described in EN ISO 12100:2010, 5.4 (see Annex B).
This document does not deal with:
-   hazards generated by the processing of explosive materials, or materials which give rise to an explosive atmosphere;
-   hazards due to laser or ionizing radiation;
-   hazards generated if the calender is installed in an explosive atmosphere.
Two roll mills are covered by EN 1417.
This document is not applicable to calenders manufactured before the date of its publication.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20430:2020(Main)
Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020)
SIST EN ISO 20430:2021

This document specifies the essential safety requirements for the design and construction of injection moulding machines for the processing of plastics and/or rubber and provides information for their safe use.
This document is applicable only to injection moulding machines with hydraulic and/or electrical drives for platen movement.
This document deals with all significant hazards, hazardous situations and events relevant to injection moulding machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) during the life cycle of the machinery (see ISO 12100:2010, 5.4).
The following are not covered:
—     machines on which the clamping unit can only be operated by the physical force of the operator;
—     machines for which the hydraulic jack can only be manually operated;
—     injection blow moulding machines;
—     machines for reaction injection moulding;
—     compression moulding machines and transfer moulding machines;
—     direct-on sole moulding machines, unit sole and footwear component moulding machines, full shoe and boot moulding machines;
—     design of an exhaust system;
—     design and construction of the mould.
NOTE    Moulds and exhaust systems are not part of the machinery.
This document is not applicable to injection moulding machines which are manufactured before the date of its publication.

  • Standard
    161 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12301:2019(Main)
Plastics and rubber machines - Calenders - Safety requirements
SIST EN 12301:2020

This document specifies safety requirements relating to the design and construction of calenders (see 3.1.1) intended for the calendering, polishing, laminating or embossing of rubber or plastics.
This document concerns the calender alone, including the following integrated components: cutting device, stock guides and feeding device, secondary roller.
Annex C shows examples of various types of calenders and Annex D shows examples of calendaring processes.
This document deals with all significant hazards, hazardous situations or hazardous events relevant to the design and construction of calenders, when the machines are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer during all the phases of the life of the machine as described in EN ISO 12100:2010, 5.4 (see Annex B).
This document does not deal with:
-   hazards generated by the processing of explosive materials, or materials which give rise to an explosive atmosphere;
-   hazards due to laser or ionizing radiation;
-   hazards generated if the calender is installed in an explosive atmosphere.
Two roll mills are covered by EN 1417.
This document is not applicable to calenders manufactured before the date of its publication.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1612:2019(Main)
Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements
SIST EN 1612:2020

This document specifies the essential safety requirements applicable to the design and construction of reaction moulding machines and plants as defined in 3.1 and 3.2.
This document deals with all significant hazards, hazardous situations or hazardous events during all phases of the machine life cycle (see EN ISO 12100:2010, 5.4), when reaction moulding machines and plants are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer (see Annex A).
A reaction moulding machine begins at the working tank(s) and ends at the mixing head(s).
A reaction moulding plant begins at the working tank(s) and ends at the product shaping and transport equipment or at the moulding equipment (see 3.6 and 3.7).
This document is not applicable to reaction moulding machines and plants manufactured before the date of its publication.
NOTE   Reaction moulding machines and plants usually do not produce explosive atmospheres. Where materials are processed, which may cause an explosive atmosphere, the Directive 2014/34/EU on the Equipment intended for use in Potentially Explosive Atmospheres (ATEX) can be applied.
Explosion hazards are not dealt with in this document.
Fire hazards are not dealt with in this document.
This document does not cover the requirements for the design of the exhaust systems.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1114-3:2019(Main)
Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs
SIST EN 1114-3:2020

This document deals with all significant hazards, hazardous situations and events relevant to haul-offs for cable, cable core, profiles and pipes for processing plastic and rubber, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). The hazards have been identified taking into account all phases of the machine life cycle according to EN ISO 12100:2010, 5.4.
The following kinds of haul-offs are covered:
-   caterpillar haul-offs;
-   belt haul-offs;
-   capstan haul-offs;
-   belt capstan haul-offs;
-   roller haul-offs.
The haul-off can function independently and begins at the product inlet opening and ends at the product outlet.
Cutting units which are integrated with or attached to the haul-off are not covered.
Take-off devices used on film or sheet lines are not covered.
This document is not applicable to haul-offs that are manufactured before the date of its publication.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12012-1:2018(Main)
Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders
SIST EN 12012-1:2018

This European Standard specifies the essential safety requirements applicable to the design and construction of blade granulators and shredders used to reduce the size of products made from plastics and/or rubber.
Machines considered in this European Standard begin at the outer edge of the feeding device/feed opening and end at the discharge area.
This European Standard deals with all significant hazards, hazardous situations or hazardous events during all phases of the machine life cycle (see Annex A), when blade granulators and shredders are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer.
This European Standard does not deal with:
- equipment for feeding material or discharging processed material that is not an integral part of the machine;
- machines intended to process materials that could be hazardous to health or flammable materials (e.g. expanded foam material).
This European Standard is not applicable to blade granulators and shredders that are manufactured before the date of its publication.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12013:2018(Main)
Plastics and rubber machines - Internal mixers - Safety requirements
SIST EN 12013:2018

This European Standard deals with all significant hazards, hazardous situations or hazardous events relevant to the design and construction of internal mixers during all phases of the machine life cycle (see EN ISO 12100:2010, 5.4), irrespective of their size and of the control modes of the feeding door and discharge door, for production and laboratory applications, when the machines are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
An internal mixer for production and a tandem mixer with manual feeding begins at the feeding door and ends at the lower edge of the material discharge opening.
An internal mixer for production and a tandem mixer with automatic feeding begins at the conveyor, which is an integral part of the machine, and ends at the lower edge of the material discharge opening.
A laboratory internal mixer begins at the feeding door and ends at the material container, which is an integral part of the mixer.
With regard to noise emission measurement and declaration, only laboratory mixers are covered.
Explosion hazards are not dealt with in this document.
NOTE   Internal mixers usually do not produce explosive atmospheres. Where materials are processed, which may cause an explosive atmosphere, the Directive 2014/34/EU on the Equipment and protective systems intended for use in potentially explosive atmospheres (ATEX) can be applied.
Exhaust systems are not covered.
This European Standard is not applicable to internal mixers manufactured before the date of its publication.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day