EN 755-2:2008

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties

This document specifies the mechanical property limits resulting from tensile testing applicable to aluminium and aluminium alloy extruded rod/bar, tube and profile.
Technical conditions for inspection and delivery, including product and testing requirements, are specified in EN 755-1. Temper designations are defined in EN 515. The chemical composition limits for these materials are given in EN 573-3.

Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile - Teil 2: Mechanische Eigenschaften

Dieses Dokument legt die Grenzwerte für die mechanischen Eigenschaften von stranggepressten Stangen, Rohren und Profilen aus Aluminium und Aluminiumlegierungen fest.
Die technischen Lieferbedingungen, einschließlich Erzeugnis- und Prüfanforderungen, sind in EN 755 1 festgelegt. Die Bezeichnungen der Werkstoffzustände sind in EN 515 definiert. In der EN 573-3 sind die Grenzen der chemischen Zusammensetzung für diese Werkstoffe angegeben.

Aluminium et alliages d'aluminium - Barres , tubes et profilés filés - Partie 2: Caractéristiques mécaniques

Le présent document spécifie les limites des caractéristiques mécaniques provenant de l’essai de traction applicables aux barres, tubes et profilés filés en aluminium et alliages d’aluminium.
Les conditions techniques de contrôle et de livraison, y compris les produits et les exigences d’essai, sont spécifiées dans l’EN 755-1. La désignation des états métallurgiques sont définis dans l’EN 515. Les limites de composition chimique de ces matériaux sont données dans l’EN 573-3.

Aluminij in aluminijeve zlitine - Iztiskane palice/drogovi, cevi in profili - 2. del: Mehanske lastnosti

General Information

• Status: Withdrawn
• Publication Date: 18-Mar-2008
• Withdrawal Date: 01-Oct-2013
• ICS: 77.150.10 - Aluminium products
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132/WG 5 - Extruded and drawn products
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 02-Oct-2013
• Completion Date: 02-Oct-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/120 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural metallic products and ancillaries
• Ref Project: SIST EN 755-2:2008 - Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties

Relations

• Replaces: EN 755-2:1997 - Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
• Effective Date: 22-Dec-2008
• Replaced By: EN 755-2:2013 - Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
• Effective Date: 16-Jul-2011

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2008
1DGRPHãþD
SIST EN 755-2:1998
Aluminij in aluminijeve zlitine - Iztiskane palice/drogovi, cevi in profili - 2. del:
Mehanske lastnosti
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2:
Mechanical properties
Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile -
Teil 2: Mechanische Eigenschaften
Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 2 :
Caractéristiques mécaniques
Ta slovenski standard je istoveten z: EN 755-2:2008
ICS:
77.150.10
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 755-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2008
ICS 77.150.10 Supersedes EN 755-2:1997
English Version
Aluminium and aluminium alloys - Extruded rod/bar, tube and
profiles - Part 2: Mechanical properties
Aluminium et alliages d'aluminium - Barres , tubes et Aluminium und Aluminiumlegierungen - Stranggepresste
profilés filés - Partie 2: Caractéristiques mécaniques Stangen, Rohre und Profile - Teil 2: Mechanische
Eigenschaften
This European Standard was approved by CEN on 10 February 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 755-2:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3
1 Scope.5
2 Normative references.5
3 Mechanical property limits .5
3.1 General.5
3.2 Elongation.5
3.3 Reference list of the tables of mechanical properties of the relevant aluminium and
aluminium alloys.6
3.4 Tables of mechanical properties.8
Annex A (informative) List of tempers used in tables 1 to 57 (extract of EN 515).65
Bibliography .66

Foreword
This document (EN 755-2:2008) has been prepared by Technical Committee CEN/TC 132 “Aluminium and
aluminium alloys”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2008, and conflicting national standards shall be
withdrawn at the latest by September 2008.
This document supersedes EN 755-2:1997.
Within its programme of work, Technical committee CEN/TC 132 entrusted CEN/TC 132/WG 5 "Extruded and
drawn products" to revise EN 755-2:1997.
The following technical modifications have been introduced during the revision:
 General: Typical Brinell hardness values are introduced in the tables for mechanical properties for
information only
The following new alloys are included; EN AW-3102, EN AW-5049, EN AW-6008, EN AW-6110A,
EN AW-6014, EN AW-6023, EN AW-6360, EN AW-6262A and EN AW-6065, EN AW-6182, EN AW-7108,
EN AW-7108A, EN AW-7021
For Alloy EN AW-5005 and EN AW-5005A new temper H111 is added
 Subclause 3.2: A value should be used for elongation if not otherwise agreed, with exception of certain
products
 Annex A: Informative Annex A added explaining temper designation used in all tables
 Former annexes A and B are deleted (content moved to Part 1)
EN 755 comprises the following parts under the general title "Aluminium and aluminium alloys — Extruded
rod/bar, tube and profiles":
 Part 1: Technical conditions for inspection and delivery
 Part 2: Mechanical properties
 Part 3: Round bars, tolerances on dimensions and form
 Part 4: Square bars, tolerances on dimensions and form
 Part 5: Rectangular bars, tolerances on dimensions and form
 Part 6: Hexagonal bars, tolerances on dimensions and form
 Part 7: Seamless tubes, tolerances on dimensions and form
 Part 8: Porthole tubes, tolerances on dimensions and form
 Part 9: Profiles, tolerances on dimensions and form
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
CEN/TC 132 affirms it is its policy that in the case when a patentee refuses to grant licenses on standardized
standards products under reasonable and not discriminatory conditions then this product shall be removed
from the corresponding standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

1 Scope
This document specifies the mechanical property limits resulting from tensile testing applicable to aluminium
and aluminium alloy extruded rod/bar, tube and profile.
Technical conditions for inspection and delivery, including product and testing requirements, are specified in
EN 755-1. Temper designations are defined in EN 515. The chemical composition limits for these materials
are given in EN 573-3.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references only the edition cited applies. For undated references the latest edition of the referenced document
(including any amendments) applies.
EN 755-1, Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 1: Technical
conditions for inspection and delivery
EN 10002-1, Metallic materials — Tensile testing — Part 1: Method of test at ambient temperature
3 Mechanical property limits
3.1 General
The mechanical properties shall be in conformity with those specified in Tables 1 to 57 or those agreed upon
between supplier and purchaser and stated in the order document.
Tables 1 to 57 contain limits of mechanical property values obtained by tensile testing according to EN 10002-
1 after sampling and test piece preparation according to EN 755-1.
NOTE The mechanical properties refer to test pieces taken in the longitudinal direction. Mechanical properties of test
pieces taken in other directions can differ from those for the longitudinal direction quoted in this standard.
Brinell hardness values given in Tables 1 to 57 expressed as HBW values are for information only.
3.2 Elongation
If not otherwise agreed, the A value shall be used.
The A value for elongation is the % elongation measured over a gauge length of 5,65 S (where S is the initial
0 0
cross-sectional area of the test-piece), and expressed in percent.
For certain products the supplier may choose (if not otherwise specified in the order documents) to use the
elongation based on A Consequently values for the A are included in the following tables.
50mm. 50mm
The A value is the elongation measured over a gauge length of 50 mm and expressed in percent.
50mm
Test pieces and their location in the specimen are given in EN 755-1.

3.3 Reference list of the tables of mechanical properties of the relevant aluminium and
aluminium alloys
Page
Table 1 Aluminium EN AW-1050A  [Al 99,5] 8
Table 2 Aluminium EN AW-1070A [Al 99,7] 9
Table 3 Aluminium EN AW-1200 [Al 99,0] 10
Table 4 Aluminium EN AW-1350 [EAl 99,5] 11
Table 5 Alloy EN AW-2007 [Al Cu4PbMgMn] 12
Table 6 Alloy EN AW-2011 and EN AW-2011A [Al Cu6BiPb] and [Al Cu6BiPb(A)] 13
Table 7 Alloy EN AW-2014 and EN AW-2014A [Al Cu4SiMg] and [Al Cu4SiMg(A)] 14
Table 8 Alloy EN AW-2017A [Al Cu4MgSi(A)] 15
Table 9 Alloy EN AW-2024 [Al Cu4Mg1] 16
Table 10 Alloy EN AW-2030 [Al Cu4PbMg] 17
Table 11 Alloy EN AW-3102 [Al Mn0,2] 18
Table 12 Alloy EN AW-3003 [Al Mn1Cu] 19
Table 13 Alloy EN AW-3103 [Al Mn1] 20
Table 14 Alloy EN AW-5005 and EN AW-5005A [Al Mg1(B)] and [Al Mg 1(C)] 21
Table 15 Alloy EN AW-5019 [Al Mg5] 22
Table 16 Alloy EN AW-5049 [Al Mg2Mn0,8] 23
Table 17 Alloy EN AW-5051A [Al Mg2] 24
Table 18 Alloy EN AW-5251 [Al Mg2Mn0,3] 25
Table 19 Alloy EN AW-5052 [Al Mg2,5] 26
Table 20 Alloy EN AW-5154A [Al Mg3,5(A)] 27
Table 21 Alloy EN AW-5454 [Al Mg3Mn] 28
Table 22 Alloy EN AW-5754 [Al Mg3] 29
Table 23 Alloy EN AW-5083 [Al Mg4,5Mn0,7] 30
Table 24 Alloy EN AW-5086 [Al Mg4] 31
Table 25 Alloy EN AW-6101A [EAI MgSi(A)] 32
Table 26 Alloy EN AW-6101B [EAI MgSi(B)] 33
Table 27 Alloy EN AW-6005 and EN AW-6005A [Al SiMg] and [Al SiMg(A)] 34
Table 28 Alloy EN AW-6106 [Al MgSiMn] 35
Table 29 Alloy EN AW-6008 [Al SiMgV] 36
Table 30 Alloy EN AW-6110A [Al Mg0,9Si0,9MnCu(A)] 37
Table 31 Alloy EN AW-6012 [Al MgSiPb] 38
Table 32 Alloy EN AW-6014 [Al Mg0,6SiV] 39
Table 33 Alloy EN AW-6018 [Al Mg1SiPbMn] 40
Table 34 Alloy EN AW-6023 [Al Si1Sn1MgBi] 41
Table 35 Alloy EN AW-6351 [Al Si1Mg0,5Mn] 42
Table 36 Alloy EN AW-6060 [Al MgSi] 43
Table 37 Alloy EN AW-6360 [Al SiMgMn] 44
Table 38 Alloy EN AW-6061 [AI Mg1SiCu] 45
Table 39 Alloy EN AW-6261 [Al Mg1SiCuMn 46
Table 40 Alloy EN AW-6262 [Al Mg1SiPb] 47
Table 41 Alloy EN AW-6262A [Al Mg1SiSn] 48
Table 42 Alloy EN AW-6063 [Al Mg0,7Si] 49
Table 43 Alloy EN AW-6063A [AI Mg0,7Si(A)] 50
Table 44 Alloy EN AW-6463 [Al Mg0,7Si(B)] 51
Table 45 Alloy EN AW-6065 [Al Mg1Bi1Si] 52
Table 46 Alloy EN AW-6081 [Al Si0,9MgMn] 53
Table 47 Alloy EN AW-6082 [Al Si1MgMn] 54
Table 48 Alloy EN AW-6182 [Al Si1MgZr] 55
Table 49 Alloy EN AW-7003 [Al Zn6Mg0,8Zr] 56
Table 50 Alloy EN AW-7005 [Al Zn4,5Mg1,5Mn] 57
Table 51 Alloy EN-AW-7108 [Al Zn5Mg1Zr] 58
Table 52 Alloy EN-AW- 7108A [Al Zn5Mg1Zr(A)] 59
Table 53 Alloy EN AW-7020 [AI Zn4,5Mg1] 60
Table 54 Alloy EN AW-7021 [Al Zn5,5Mg1,5] 61
Table 55 Alloy EN AW-7022 [Al Zn5Mg3Cu] 62
Table 56 Alloy EN AW-7049A [Al Zn8MgCu] 63
Table 57 Alloy EN AW-7075 [Al Zn5,5MgCu] 64

3.4 Tables of mechanical properties
Table 1 — Aluminium EN AW-1050A [Al 99,5]
Extruded rod/bar
R R
Dimensions m p0,2
A A
HBW
50 mm
mm
MPa MPa
Temper % %
Typical
a b value
min. min.
D S
min. max. min. max.
c
F , H112 all all 60 - 20 - 25 23 20
O, H111 all all 60 95 20 - 25 23 20
Extruded tube
R R
m p0,2 A A
HBW
50 mm
Wall thickness
MPa MPa
Temper t % %
Typical
mm
value
min. min
min. max. min. max.
c
F , H112 all 60 20 - 25 23 20
O, H111 all 60 95 20 - 25 23 20
Extruded profile
R R
m p0,2 A A
HBW
50 mm
Wall thickness
MPa MPa
Temper t % %
Typical
mm
value
min. min
min. max. min. max.
c
F , H112 all 60 20 - 25 23 20
a
D = Diameter for round bar.
b
S = Width across flats for square and hexagonal bar, thickness for rectangular bar.
c
F Temper: property values are for information only.
Table 2 — Aluminium EN AW-1070A [Al 99,7]
Extruded rod/bar
R R
Dimensions m p0,2
A A
HBW
50 mm
mm
MPa MPa
Temper % %
Typical
a b value
min. min.
D S min. max. min. max.
c
F , H112 all all 60 - 23 25 23 18
Extruded tube
Not specified
Extruded profile
Not specified
a
D = Diameter for round bar.
b
S = Width across flats for square and hexagonal bar, thickness for rectangular bar.
c
F Temper: property values are for information only.

Table 3 — Aluminium EN AW-1200 [Al 99,0]
Extruded rod/bar
R R
Dimensions
m p0,2
A A HBW
50 mm
mm
MPa MPa
Temper % %
Typical
a b
value
min. min.
D S min. max. min. max.
c
F , H112 all all 75 - 25 - 20 18 23
Extruded tube
R R
m p0,2
A A
50 mm HBW
Wall thickness
MPa MPa
Temper t % %
Typical
mm
value
min. min.
min. max. min. max.
c
F , H112 all all 75 - 25 20 18 23
Extruded profile
R R
m p0,2
A A
HBW
Wall thickness 50 mm
MPa MPa
Temper t % %
Typical
mm
value
min. min.
min. max. min. max.
c
F , H112 all 75 - 25 20 18 23
a
D = Diameter for round bar.
b
S = Width across flats for square and hexagonal bar, thickness for rectangular bar.
c
F Temper: property values are for infor
...