EN ISO 11607-2:2006
(Main)Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006)
Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006)
ISO 11607-2:2006 specifies the requirements for development and validation of processes for packaging medical devices that are terminally sterilized. These processes include forming, sealing, and assembly of preformed sterile barrier systems, sterile barrier systems and packaging systems.
ISO 11607-2:2006 is applicable to industry, to health care facilities, and wherever medical devices are packaged and sterilized.
ISO 11607-2:2006 does not cover all requirements for packaging medical devices that are manufactured aseptically. Additional requirements may also be necessary for drug/device combinations.
Verpackungen für in der Endverpackung zu sterilisierende Medizinprodukte - Teil 2: Validierungsanforderungen an Prozesse der Formgebung, Siegelung und des Zusammenstellens (ISO 11607-2:2006)
Dieser Teil von ISO 11607 legt die Anforderungen für die Entwicklung und Validierung von Verpackungs-prozessen für Medizinprodukte fest, die in der Endverpackung sterilisiert werden. Zu diesen Verfahren gehören die Formgebung, Siegelung und das Zusammenstellen von vorgefertigten Sterilbarrieresystemen, Sterilbarrieresystemen und Verpackungssystemen.
Dieser Teil von ISO 11607 gilt für die Industrie, für Einrichtungen des Gesundheitswesens und alle anderen Einrichtungen, in denen Medizinprodukte verpackt und sterilisiert werden.
Dieser Teil von ISO 11607 erfasst nicht alle Anforderungen für die Verpackung von aseptisch hergestellten Medizinprodukten. Auch für Kombinationen von Medikamenten und Medizinprodukten können zusätzliche Anforderungen erforderlich sein.
Emballages des dispositifs médicaux stérilisés au stade terminal - Partie 2: Exigences de validation pour les procédés de formage, scellage et assemblage (ISO 11607-2:2006)
L'ISO 11607-2:2006 spécifie les exigences pour la mise au point et la validation des procédés d'emballage de dispositifs médicaux qui sont stérilisés au stade terminal. Ces procédés comprennent le formage, le scellage et l'assemblage de systèmes de barrière stérile préformés, de systèmes de barrière stérile et de systèmes d'emballage.
L'ISO 11607-2:2006 s'applique à l'industrie, aux installations de santé et à tout lieu où les dispositifs médicaux sont emballés et stérilisés.
L'ISO 11607-2:2006 ne couvre pas toutes les exigences relatives aux dispositifs médicaux fabriqués de manière aseptique. Des exigences supplémentaires sont nécessaires pour garantir les combinaisons médicaments/dispositifs.
Embalaža za končno sterilizirane medicinske pripomočke - 2. del: Zahteve validacije za proces oblikovanja, označevanja in sestavljanja (ISO 11607-2:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11607-2:2006
01-julij-2006
(PEDODåD]DNRQþQRVWHULOL]LUDQHPHGLFLQVNHSULSRPRþNHGHO =DKWHYH
YDOLGDFLMH]DSURFHVREOLNRYDQMDR]QDþHYDQMDLQVHVWDYOMDQMD ,62
Packaging for terminally sterilized medical devices - Part 2: Validation requirements for
forming, sealing and assembly processes (ISO 11607-2:2006)
Verpackungen für in der Endverpackung zu sterilisierende Medizinprodukte - Teil 2:
Validierungsanforderungen an Prozesse der Formgebung, Siegelung und des
Zusammenstellens (ISO 11607-2:2006)
Emballages des dispositifs médicaux stérilisés au stade terminal - Partie 2: Exigences de
validation pour les procédés de formage, scellage et assemblage (ISO 11607-2:2006)
Ta slovenski standard je istoveten z: EN ISO 11607-2:2006
ICS:
11.080.30
SIST EN ISO 11607-2:2006 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 11607-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2006
ICS 11.080.30
English Version
Packaging for terminally sterilized medical devices - Part 2:
Validation requirements for forming, sealing and assembly
processes (ISO 11607-2:2006)
Emballages des dispositifs médicaux stérilisés au stade Verpackungen für in der Endverpackung zu sterilisierende
terminal - Partie 2: Exigences de validation pour les Medizinprodukte - Teil 2: Validierungsanforderungen an
procédés de formage, scellage et assemblage (ISO 11607- Prozesse der Formgebung, Siegelung und des
2:2006) Zusammenstellens (ISO 11607-2:2006)
This European Standard was approved by CEN on 13 April 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11607-2:2006: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 11607-2:2006 (E)
Foreword
This document (EN ISO 11607-2:2006) has been prepared by Technical Committee ISO/TC 198
"Sterilization of health care products" in collaboration with Technical Committee CEN/TC 102
"Sterilizers for medical purposes", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2006, and conflicting national standards
shall be withdrawn at the latest by October 2006.
This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 11607-2:2006 has been approved by CEN as EN ISO 11607-2:2006 without any
modifications.
2
---------------------- Page: 3 ----------------------
EN ISO 11607-2:2006 (E)
ANNEX ZA
(informative)
Relationship between this International Standard and the Essential
Requirements of EU Directive 93/42/EEC on medical devices
This International Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association to provide a means of conforming to
Essential Requirements of the New Approach Directive 93/42/EEC on medical devices.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.