iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 1514:2024

(Main)

Paints and varnishes - Standard panels for testing (ISO 1514:2024)

Paints and varnishes - Standard panels for testing (ISO 1514:2024)

This document specifies several types of standard panels and provides guidance and requirements on the procedures for their preparation prior to painting. The standard panels described in this document are intended for use in general methods of test for paints, varnishes and related products.

Beschichtungsstoffe - Norm-Probenplatten (ISO 1514:2024)

Dieses Dokument legt mehrere Arten von Probenplatten fest und bietet Leitlinien und Anforderungen zu den Verfahren für deren Vorbereitung vor dem Beschichten. Die in diesem Dokument beschriebenen Norm-Probenplatten sind zur Verwendung für allgemeine Verfahren zur Prüfung von Beschichtungsstoffen und ähnlichen Produkten vorgesehen.

Peintures et vernis - Panneaux normalisés pour essai (ISO 1514:2024)

Le présent document spécifie divers types de panneaux normalisés et donne des recommandations et des exigences sur les méthodes de préparation avant mise en peinture. Les panneaux normalisés décrits dans le présent document sont destinés à être utilisés dans les méthodes générales d’essai des peintures, des vernis et des produits assimilés.

Barve in laki - Standardne ploščice za preskušanje (ISO 1514:2024)

Standard ISO 1514:2016 določa več vrst standardnih ploščic za preskušanje in opisuje postopke za njihovo pripravo pred barvanjem. Te standardne ploščice se uporabljajo za splošne metode preskušanja za barve, lake in sorodne izdelke.

General Information

Status
Published
Publication Date
16-Jul-2024
ICS
87.040 - Paints and varnishes
87.100 - Paint coating equipment
Technical Committee
CEN/TC 139 - Paints and varnishes
Drafting Committee
CEN/TC 139 - Paints and varnishes
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
17-Jul-2024
Completion Date
17-Jul-2024
Ref Project
SIST EN ISO 1514:2024 - Paints and varnishes - Standard panels for testing (ISO 1514:2024)

Relations

Replaces
EN ISO 1514:2016 - Paints and varnishes - Standard panels for testing (ISO 1514:2016)
Effective Date
13-Jul-2022

Buy Standard

EN ISO 1514:2024EN ISO 1514:2024
PreviousNext
Standard
EN ISO 1514:2024
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2024
Nadomešča:
SIST EN ISO 1514:2016
Barve in laki - Standardne ploščice za preskušanje (ISO 1514:2024)
Paints and varnishes - Standard panels for testing (ISO 1514:2024)
Beschichtungsstoffe - Norm-Probenplatten (ISO 1514:2024)
Peintures et vernis - Panneaux normalisés pour essai (ISO 1514:2024)
Ta slovenski standard je istoveten z: EN ISO 1514:2024
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 1514
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2024
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 1514:2016
English Version
Paints and varnishes - Standard panels for testing (ISO
1514:2024)
Peintures et vernis - Panneaux normalisés pour essai Beschichtungsstoffe - Norm-Probenplatten (ISO
(ISO 1514:2024) 1514:2024)
This European Standard was approved by CEN on 3 July 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1514:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 1514:2024) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2025, and conflicting national standards shall
be withdrawn at the latest by January 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1514:2016.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 1514:2024 has been approved by CEN as EN ISO 1514:2024 without any modification.

International
Standard
ISO 1514
Sixth edition
Paints and varnishes — Standard
2024-07
panels for testing
Peintures et vernis — Panneaux normalisés pour essai
Reference number
ISO 1514:2024(en) © ISO 2024
ISO 1514:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 1514:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Steel panels . 2
4.1 Properties .2
4.2 Storage prior to preparation .2
4.3 Preparation by solvent cleaning .2
4.4 Preparation by aqueous cleaning (spray or immersion process) .3
4.5 Preparation by abrasion .3
4.5.1 General .3
4.5.2 Hand abrasion .3
4.5.3 Circular mechanical abrasion .4
4.5.4 Linear grinding .4
4.6 Inspection and cleaning .4
4.7 Preparation by phosphate treatment .4
4.7.1 General .4
4.7.2 Amorphous iron phosphate treatment .4
4.8 Preparation by blast-cleaning .4
5 Tinplate panels . 4
5.1 Properties .4
5.2 Preparation by solvent or aqueous cleaning .5
5.3 Preparation by abrasion .5
6 Zinc- and zinc-alloy-coated panels . 5
6.1 Properties .5
6.2 Preparation by solvent cleaning .5
6.3 Preparation by aqueous cleaning .5
7 Aluminium panels . 6
7.1 Properties .6
7.2 Preparation by solvent cleaning .6
7.3 Preparation by aqueous cleaning .6
7.4 Preparation by abrasion .6
8 Coil-coating panels of steel or aluminium . 6
8.1 Properties .6
8.2 Coating .6
8.3 Substrate .7
8.4 Preparation by solvent cleaning .7
9 Plastics panels . 7
9.1 Properties .7
9.2 Preparation by solvent cleaning .7
9.3 Preparation by detergent cleaning .7
9.4 Pre-treatment by flaming .7
10 Glass-fibre reinforced plastic composite panels (GRP) . 7
10.1 Properties .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17677:2024(Main)
Food processing machinery - Craft bakery and pastry depositors - Safety and hygiene requirements
kSIST FprEN 17677:2024

1.1 This document specifies safety and hygiene requirements for the design and manufacture of craft bakery and pastry depositors as described in the normative Annex A and which:
a)   are intended to be:
-   only for professional use;
-   used by one operator at a time;
-   used to deposit only pasty food (i.e.: cream, dough, batter, etc.);
-   used to deposit only on trays;
-   used as standalone machines;
-   used with manual loading of the dough into the hopper;
-   used with manual loading and unloading of the tray/s on/from the tray conveyor.
b)   can carry out only the following movements and relevant directions (see Figure 1a)):
-   Z: vertical movement of the table and/or the deposit unit;
-   X: horizontal movement of the tray conveyor;
-   Y: possible horizontal component of the movement only of the spouts themselves inside the deposit unit;
c)   are fitted with one or more hoppers whose capacity is ≤ 60 dm3 each;
d)   have a total length of the tray conveyor ≤ 1 600 mm;
e)   have a vertical movement between spouts and tray conveyor (H) ≤ 200 mm (see Figure 1c));
f)   have a deposit performance (see 3.5):
-   ≤ 60 cycles/minute with up/down movement of the table or the deposit unit;
-   ≤ 100 cycles/minute without up/down movement of the table or the deposit unit;
g)   have a trays performance (see 3.6) ≤ 4 trays/minute.
This document deals with all significant hazards, hazardous situations and events relevant to adjustment, operation and cleaning of craft bakery and pastry depositors, when they are used as intended or under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document covers requirements for the safe operation of the machine, including loading, depositing, unloading and cleaning.
1.2 The following hazards are not covered by this document:
-   hazards arising from the use of an automatic hopper loading system;
-   hazards due to packaging, handling or transport;
-   hazards arising from electromagnetic compatibility issues;
-   hazards due to dismantling and disassembling;
-   hazards due to operational stop;
-   hazards due to selection of control or operating modes;
-   hazards due to failure of the power supply;
-   hazards due to surfaces, edges or angles;
-   hazards due to uncontrolled movements;
-   hazards due to machinery maintenance.
This standard does not deal with any specific requirements on noise emitted from craft bakery and pastry depositor as the generated noise does not cause a relevant hazard.
The significant hazards covered by this document are described in Annex B.
1.3 The following machines are excluded from the scope of this document:
a)   machines which deposit pasty food by means of needles (injection);
b)   machines where the trays are put onto and/or removed from the tray conveyor automatically;
c)   machines which require a blade for the cutting system;
d)   domestic appliances;
e)   machines for industrial production;
f)   machines to deposit other products than food for bakery and pastry products.
1.4 This document is not applicable to machines which are manufactured before the date of publication of this European Standard.

  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17137:2024(Main)
Textiles and textile products - Determination of the content of compounds based on chlorobenzenes and chlorotoluenes
kSIST FprEN 17137:2024

This document specifies a test method using gas chromatography with mass selective detector (GC-MS) for detection and quantification of chlorobenzenes, chlorotoluenes, and α-chlorinated toluenes in fibres, yarns, fabrics, coated fabrics and plastics.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17948:2024(Main)
Maintenance management and functions
kSIST FprEN 17948:2024

This document specifies the main content of maintenance management and the main activities for which maintenance management is responsible.
This document is applicable to maintenance managers and asset managers in the industry sector and for infrastructure and buildings in order to achieve the success factors of the organization.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 556-2:2024(Main)
Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 2: Requirements for aseptically processed medical devices
kSIST FprEN 556-2:2024

This document specifies the requirements for an aseptically processed medical device to be designated “STERILE”.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/CLC/TR 18115:2024(Main)
Data governance and quality for AI within the European context
kSIST-TP FprCEN/CLC/TR 18115:2024

This document provides an overview on AI-related standards, with a focus on data and data life cycles, to organizations, agencies, enterprises, developers, universities, researchers, focus groups, users, and other stakeholders that are experiencing this era of digital transformation.
It describes links among the many international standards and regulations published or under development, with the aim of promoting a common language, a greater culture of quality, giving an information framework.
It addresses the following areas:
-   data governance;
-   data quality;
-   elements for data, data sets properties to provide unbiased evaluation and information for testing.

  • Draft
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17992:2024(Main)
Food authenticity - Determination of the sum of 16-O-Methylcafestol, 16-O-Methylkahweol and their derivatives in roasted coffee by ¹H-qNMR
kSIST FprEN 17992:2024

This document specifies a method for the determination of soluble 16-O-Methylcafestol and 16-O-Methylkahweol content (the sum of free forms and derivatives, e.g. fatty acid esters, henceforth abbreviated as 16-OMD = “diterpenes”) in roasted coffee (beans or ground), using quantitative proton nuclear magnetic resonance spectroscopy (1H-qNMR).
If complying with the experimental parameters described below, this test procedure has been proven for the following mass fraction range:
w16-OMD:    20 mg/kg to 2 000 mg/kg.
The mass fraction range can be expanded by suitable changes of the experimental parameters, e.g. a different weighed portion of ground coffee or the accumulation of more NMR-transients.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22476-16:2024(Main)
Geotechnical investigation and testing - Field testing - Part 16: Borehole shear test (ISO 22476‑16:2024)
kSIST FprEN ISO 22476-16:2023

This document is applicable to the borehole shear test using the phicometer procedure, commonly named the phicometer test (etymologically derived from phi for friction angle, co for cohesion and meter for measurement).
The test can be performed in all types of natural soils, fills and artificial soils, which can be saturated or not.
It does not apply to very soft fine soils, very loose coarse soils, medium strong to very strong rocks and natural or artificial soils with a predominance of cobbles having a particle diameter greater than 150 mm.
Generally, the test is applicable in soils with an order of magnitude of their in situ resistance characteristics as follows:
—     Ménard pressuremeter limit pressure: 0,4 MPa < plM < 3,5 MPa approximately or more than 4 MPa in granular non-cohesive soils;
—     CPT Cone resistance: 1,5 MPa —     SPT N: 8 The test can also be carried out in soils presenting a resistance outside these application limits as long as the representativeness of the results is assessed or validated by the analysis of the PBST graphs (see Clause 8).
This document applies only to tests carried out at a depth less than or equal to 30 m.
The parameters derived from this test are the shear strength properties, as the cohesion and angle of friction.

  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16214-1:2024(Main)
Sustainability and greenhouse gas emission saving criteria for biomass for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology
KSIST FprEN 16214-1:2023

This document specifies the terminology to be used in the field of sustainability and greenhouse gas emission saving criteria for biomass for energy applications. This document specifically considers some relevant terms and definitions used in European Commission Directive 2018/EU/2001, the recast of the Renewable Energy Directive (RED II), and the European Commission Directive 2009/30/EC referred to as Fuel Quality Directive (FQD), or in other related European regulations.

  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 18003:2024(Main)
Food authenticity - Determination of 16-O-Methylcafestol content of green and roasted coffee - HPLC-method
kSIST FprEN 18003:2024

This document specifies a high-performance liquid chromatography (HPLC) method for determining the 16-O-Methylcafestol content in green and roasted coffee.
The method is suitable for a content of 40 mg/kg to 1 600 mg/kg of 16-O-Methylcafestol of green and roasted coffee, respectively. The collaborative study has shown that mass fractions also between 20 mg/kg to 40 mg/kg can be successfully analysed depending on the laboratory equipment.
The compliance assessment process is not part of this document.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12735-2:2024(Main)
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
kSIST FprEN 12735-2:2024

This document specifies the requirements, sampling, test methods and conditions of delivery for seamless round copper tubes, smooth or inner finned, used for heat exchangers and their internal connecting pipes in the manufacturing of refrigeration and air conditioning equipment.
It is applicable to tubes with an outside diameter from 3,97 mm up to and including 219 mm.
NOTE   The tubes are supplied in straight length or as coils.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day