EN 14772:2005
(Main)Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
This European Standard specifies the technical delivery conditions and quality assurance for gaskets and sheet gasket materials.
Flansche und ihre Verbindungen - Qualitätssicherungsprüfung und Prüfung von Dichtungen nach den Normen der Reihen EN 1514 und EN 12560
Diese Europäische Norm legt die Qualitätssicherungsverfahren fest, mit denen sichergestellt werden kann,
dass die gelieferten Dichtungen den jeweiligen Produktnormen entsprechen. Diese Europäische Norm enthält
Verfahren, nach denen der Anwender darauf vertrauen kann, dass die wesentlichen Merkmale jedes ge-
lieferten Loses Dichtungen oder Dichtungswerkstoffe konstant bleiben.
Die in dieser Europäischen Norm behandelten Dichtungsarten fallen in den Anwendungsbereich der Normen-
reihen EN 1514 und EN 12560 sowie gleichzeitig der Normenreihe EN 1591. Eine Ausnahme bilden die
ausschließlich für Flüssigkeiten für den häuslichen Gebrauch (z. B. Wasser, Abwasser ...) bestimmten Dich-
tungen aus Gummi mit oder ohne Verstärkung wie Füllstoffe und/oder Einlagen.
Brides et leurs assemblages - Contrôle de l'assurance de la qualité et essais de joints conformément aux série de normes EN 1514 et EN 12560
Le présent document spécifie les modes opératoires d�assurance de la qualité applicables pour garantir que
les joints fournis sont conformes aux normes de produits correspondantes. Le présent document fixe des
modes opératoires qui donnent à un utilisateur l�assurance que les caractéristiques principales de chaque lot
de joints ou matériaux de joints qui lui sont fournis sont constantes.
Les types de joints couverts par le présent document sont ceux qui relèvent du domaine d�application des
séries de normes EN 1514 et EN 12560 et simultanément du domaine d�application de la série de normes
EN 1591, à l�exception des joints uniquement destinés à un usage domestique (par exemple, pour l�eau, les
eaux usées�) qui sont en caoutchouc, avec ou sans renfort, tel que des matériaux de remplissage et/ou des
inserts.
Prirobnice in prirobnične zveze - Nadzor zagotavljanja kakovosti in preskušanje tesnilk, izdelanih skladno s standardoma serije EN 1514 in EN 12560
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2005
3ULUREQLFHLQSULUREQLþQH]YH]H1DG]RU]DJRWDYOMDQMDNDNRYRVWLLQSUHVNXãDQMH
WHVQLONL]GHODQLKVNODGQRVVWDQGDUGRPDVHULMH(1LQ(1
Flanges and their joints - Quality assurance inspection and testing of gaskets in
accordance with the series of standards EN 1514 and EN 12560
Flansche und ihre Verbindungen - Qualitätssicherungsprüfung und Prüfung von
Dichtungen nach den Normen der Reihen EN 1514 und EN 12560
Brides et leurs assemblages - Contrôle de l'assurance de la qualité et essais de joints
conformément aux série de normes EN 1514 et EN 12560
Ta slovenski standard je istoveten z: EN 14772:2005
ICS:
23.040.60 Prirobnice, oglavki in spojni Flanges, couplings and joints
elementi
23.040.80 Tesnila za cevne zveze Seals for pipe and hose
assemblies
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 14772
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2005
ICS 23.040.60; 23.040.80
English version
Flanges and their joints - Quality assurance inspection and
testing of gaskets in accordance with the series of standards EN
1514 and EN 12560
Brides et leurs assemblages - Contrôle de l'assurance de la Flansche und ihre Verbindungen -
qualité et essais de joints conformément aux série de Qualitätssicherungsprüfung und Prüfung von Dichtungen
normes EN 1514 et EN 12560 nach den Normen der Reihen EN 1514 und EN 12560
This European Standard was approved by CEN on 3 January 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14772:2005: E
worldwide for CEN national Members.
Contents
Page
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Definitions .6
4 Structure of this document.6
5 Quality assurance tests and inspections.6
5.1 Quality assurance inspection and testing of gaskets as indicated in the relevant standard.6
5.1.1 General.6
5.1.2 Non-metallic flat gasket with or without inserts.6
5.1.3 Spiral wound gaskets.7
5.1.4 Non-metallic PTFE envelope gaskets.7
5.1.5 Corrugated, flat or grooved metallic and filled metallic gaskets.7
5.1.6 Metallic ring type gaskets .8
5.1.7 Covered serrated metal gaskets .8
5.1.8 Covered jacketed gaskets.9
5.1.9 Polymeric "O" Ring Gaskets .9
5.2 Quality assurance tests that are relevant for the components of composite gaskets.9
5.2.1 General.9
5.2.2 Exfoliated graphite.9
5.2.3 PTFE (All forms).10
5.2.4 Plate silicate .10
5.2.5 Millboard.10
5.2.6 Rubber bound, fibre reinforced, sheet material .10
5.2.7 Metal.10
5.3 Functional testing of the gaskets.10
5.3.1 General.10
5.3.2 Non-metallic flat gaskets with or without inserts.11
5.3.3 Spiral wound gaskets.11
5.3.4 Non-metallic PTFE envelope gaskets.11
5.3.5 Corrugated, flat or grooved metallic and filled metallic gaskets.11
5.3.6 Metallic ring type gaskets .11
5.3.7 Covered serrated metal gaskets .11
5.3.8 Covered jacketed gaskets.11
5.3.9 Polymeric "O" Ring Gaskets .11
6 Recommended test procedures.12
6.1 Thickness determination .12
6.2 Density/Weight per unit area determination .12
6.3 Ash content/Ignition loss determination.12
6.4 Compression and recovery determination .12
6.5 Chloride content determination .12
6.6 Sulphur content determination .12
6.7 Comparative graphite oxidation determination.12
6.8 Gas permeability determination.13
6.9 Stress retention determination.13
6.10 Hardness.13
7 Reporting .13
Bibliography .14
Foreword
This document (EN 14772:2005) has been prepared by Technical Committee CEN/TC 74 “Flanges and their
joints", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2005, and conflicting national standards shall be withdrawn at
the latest by August 2005.
This document includes a Bibliography.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-
mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-
bourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and
United Kingdom.
Introduction
This document provides a set of quality assurance procedures which is applicable to a wide range of gasket
types encompassing most types of industrial applications.
1 Scope
This document specifies the quality assurance procedures that are applicable to ensure that delivered gaskets
comply with the relevant product standards. This document sets down procedures by which a user can have
confidence that the salient features of each batch of gaskets or gasket materials delivered to him will be
constant.
The gasket types covered by this document are those that are within the scope of the series of standards
EN 1514 and EN 12560 and are simultaneously within the scope of the series of standards EN 1591. An ex-
ception is those gaskets intended solely for domestic fluids (like water, waste water .) which are based on
rubber with or without reinforcement like fillers and/or inserts.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated refer-
ences, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
EN 1514-1:1997, Flanges and their joints — Dimensions of gaskets for PN-designated flanges — Part 1: Non-
metallic flat gaskets with or without inserts.
EN 1514-2:1997, Flanges and their joints — Dimensions of gaskets for PN-designated flanges — Part 2:
Spiral wound gaskets for use with steel flanges.
EN 1514-3:1997, Flanges and their joints — Dimensions of gaskets for PN-designated flanges — Part 3: Non-
metallic PTFE envelope gaskets.
EN 1514-4:1997, Flanges and their joints — Dimensions of gaskets for PN-designated flanges — Part 4:
Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges.
EN 1514-6:2003, Flanges and their joints — Dimensions of gaskets for PN-designated flanges — Part 6:
Covered serrated metal gaskets for use with steel flanges.
EN 1514-7:2004, Flanges and their joints — Gaskets for PN-designated flanges — Part 7: Covered metal
jacketed gaskets for use with steel flanges.
EN 1514-8:2004, Flanges and their joints — Dimensions of gaskets for PN-designated flanges — Part 8: Poly-
meric O-Ring gaskets for grooved flanges.
EN 12560-1:2001, Flanges and their joints — Gaskets for Class-designated flanges — Part 1: Non-metallic
flat gaskets with or without inserts.
EN 12560-2:2001, Flanges and their joints — Gaskets for Class-designated flanges — Part 2: Spiral wound
gaskets for use with steel flanges.
EN 12560-3:2001, Flanges and their joints — Gaskets for Class-designated flanges — Part 3: Non-metallic
PTFE envelope gaskets.
EN 12560-4:2001, Flanges and their joints — Gaskets for Class-designated flanges — Part 4: Corrugated, flat
or grooved metallic and filled metallic gaskets for use with steel flanges.
EN 12560-5:2001, Flanges and their joints — Gaskets for Class-designated flanges — Part 5: Metallic ring
joint gaskets for use with steel flanges.
EN 12560-6:2003, Flanges and their joints — Gaskets for Class-designated flanges — Part 6: Covered
serrated metal gaskets for use with steel flanges.
EN 12560-7:2004, Flanges and their joints — Gaskets for Class-designated flanges — Part 7: Covered metal
jacketed gaskets for use with steel flanges.
3 Definitions
For the purposes of this document, the terms and definitions given in the series of standards EN 1514 and
EN 12560 apply.
4 Structure of this document
This document is in three main sections that are to be found in Clause 5.
The first section deals with the quality assurance inspection and testing of gaskets to the requirements of the
relevant standard in the series of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.