iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12729:2002

(Main)

Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A

Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A

The purpose of this standard is to define - the field of application; - the dimensional, physico-chemical, design, hydraulic, mechanical and acoustic characteristics; - the working and the prescriptions for the tests to check , these characteristics; - the marking and the presentation. To be adhered to for reduced pressure principle backflow preventers, controllable BA.

Sicherungseinrichtungen zum Schutz des Trinkwassers gegen Verschmutzung durch Rückfließen - Systemtrenner mit kontrollierbarer druckreduzierter Zone - Familie B - Typ A

Diese Europäische Norm legt den Anwendungsbereich, die maßlichen und physikalisch-chemischen Anforde-rungen, die Anforderungen an die Konstruktion, die hydraulischen, mechanischen und akustischen Anforderungen für Systemtrenner mit kontrollierbarer druckreduzierter Zone, Familie B, Typ A fest.
Die vorliegende Norm gilt für Systemtrenner mit kontrollierbarer druckreduzierter Zone, Familie B, Typ A, die verhindern sollen, dass durch Rücksaugen oder Rückdrücken Wasser in das Trinkwasserversorgungsnetz zurückfließt, wenn der Druck in diesem Netz niedriger ist als in der nachgeschalteten Anlage.
Die Norm gilt für Systemtrenner der Nennweiten DN 8 bis DN 250.
Diese Norm gilt für Systemtrenner mit einem Nenndruck PN 10, die ohne Abänderung oder Nachstellung arbeiten:
¾ bei jedem Druck bis 1 MPa (10 bar);
¾ bei jeder Druckschwanking bis 1 MPa (10 bar);
¾ der Dauerbelastung bei einer Grenztemperatur von 65 °C sowie bei 90 °C für den Zeitraum von 1 h.
Die Norm enthält ferner Festlegungen für die Prüfverfahren und Anforderungen zum Nachweis dieser Eigen-schaften, die Kennzeichnung und den Lieferzustand.

Dispositifs de protection contre la pollution par retour de l'eau potable - Disconnecteur à zone de pression réduite contrôlable - Famille B - Type A

La présente Norme européenne spécifie le domaine d'application, les caractéristiques dimensionnelles, physico-chimiques, de conception hydrauliques, mécaniques et acoustiques de disconnecteurs à zone de pression réduite contrôlable de Famille B, Type A.
La présente norme s'applique aux disconnecteurs de Famille B, Type A à zone de pression réduite contrôlable, destinés à empêcher le retour d'une eau par contre pression ou siphonnage dans le réseau de distribution d'eau potable, lorsque la pression dans ce dernier est plus faible que dans le circuit placé en aval.
Elle est applicable aux disconnecteurs contrôlables de dénomination DN 8 à DN 250.
Elle s'applique aux disconnecteurs contrôlables de PN 10 qui doivent pouvoir fonctionner sans modification ni réglage :
   à toute pression jusqu'à 1 MPa (10 bar) ;
   pour toute variation de pression jusqu'à 1 MPa (10 bar) ;
   en service continu à une température limite de 65 °C et de 90 °C pendant 1 h au maximum.
Elle spécifie également les méthodes d'essai et les exigences pour vérifier leurs caractéristiques, le marquage et la présentation à la livraison.

Naprave za varovanje pred onesnaženjem pitne vode zaradi povratnega toka - Sistemski ločevalnik z nadzorovanim območjem znižanega tlaka - Družina B - Tip A

General Information

Status
Withdrawn
Publication Date
19-Nov-2002
Withdrawal Date
28-Feb-2023
ICS
13.060.20 - Drinking water
91.140.60 - Water supply systems
Technical Committee
CEN/TC 164 - Water supply
Drafting Committee
CEN/TC 164/WG 14 - Valves and fitting for buildings and devices to prevent pollution by backflow
Current Stage
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/EXP - Expected mandates in CPD field.
Ref Project
SIST EN 12729:2003 - Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A

Relations

Replaced By
EN 12729:2023 - Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A
Effective Date
19-Jan-2023

Buy Standard

EN 12729:2003EN 12729:2003
PreviousNext
Standard
EN 12729:2003
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12729:2003
01-oktober-2003
1DSUDYH]DYDURYDQMHSUHGRQHVQDåHQMHPSLWQHYRGH]DUDGLSRYUDWQHJDWRND
6LVWHPVNLORþHYDOQLN]QDG]RURYDQLPREPRþMHP]QLåDQHJDWODND'UXåLQD%7LS
$
Devices to prevent pollution by backflow of potable water - Controllable backflow
preventer with reduced pressure zone - Family B - Type A
Sicherungseinrichtungen zum Schutz des Trinkwassers gegen Verschmutzung durch
Rückfließen - Systemtrenner mit kontrollierbarer druckreduzierter Zone - Familie B - Typ
A
Dispositifs de protection contre la pollution par retour de l'eau potable - Disconnecteur a
zone de pression réduite contrôlable - Famille B - Type A
Ta slovenski standard je istoveten z: EN 12729:2002
ICS:
13.060.20 Pitna voda Drinking water
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN 12729:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 12729
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2002
ICS 13.060.20; 91.140.60
English version
Devices to prevent pollution by backflow of potable water -
Controllable backflow preventer with reduced pressure zone -
Family B - Type A
Dispositifs de protection contre la pollution par retour de Sicherungseinrichtungen zum Schutz des Trinkwassers
l'eau potable - Disconnecteur à zone de pression réduite gegen Verschmutzung durch Rückfließen - Systemtrenner
contrôlable - Famille B - Type A mit kontrollierbarer druckreduzierter Zone - Familie B - Typ
A
This European Standard was approved by CEN on 7 September 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12729:2002 E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 12729:2002 (E)
Contents
page
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions.6
4 Denomination .7
5 Designation.7
6 Symbolization.7
7 Physico-chemical characteristics .8
7.1 Materials.8
7.2 Nature of the materials .8
8 Design .9
8.1 General.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12729:2023(Main)
Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A
SIST EN 12729:2023

This document specifies the field of application, the dimensional, the physico-chemical, the design, the hydraulic, the mechanical, and the acoustic characteristics of controllable backflow preventers with reduced pressure zone, Family B, Type A.
This document covers controllable backflow preventers of Family B, Type A, with reduced pressure zones, intended to prevent pollution of potable water by backflow, caused by backsiphonage or by backpressure.
It is applicable to controllable backflow preventers in denominations DN 6 up to DN 250.
It covers controllable backflow preventers of PN 10 that are capable of working without modification or adjustment:
- at any pressure, up to 1 MPa (10 bar);
- with any pressure variation, up to 1 MPa (10 bar);
- in permanent duty at a limited temperature of 65 °C and for maximum 1 h at 90 °C.
It specifies also the test methods and requirements for verifying their characteristics, the marking and the presentation at delivery.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17801:2022(Main)
Guidelines for water safety plan concept in buildings
SIST-TP CEN/TR 17801:2022

This document describes a method for the analysis, evaluation and management of risks that exist or may arise from the use of potable water installations within buildings and, for certain purposes, outside buildings but within the premises. Water Safety Plans for potable water supply systems are excluded from the scope of this document.
The document is addressed to all organisations and other stakeholders which are responsible for providing potable water within a safe potable water installation inside buildings according to EN 806, EN 1717 and national regulations.

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15848:2010(Main)
Water conditioning equipment inside buildings - Adjustable chemical dosing systems - Requirements for performance, safety and testing
SIST EN 15848:2012

This European Standard specifies definitions, principles of construction (but not dimensions) and design, requirements on performance and operation as well as methods for testing the performance of adjustable chemical dosing systems for conditioning water intended for human consumption inside buildings (see [1]) which are permanently connected to the mains supply.
The concentration in the treated water of the active chemical(s) as well as of any other ingredient or minor component (including possible contaminants) should not exceed the parametric values laid down in the existing legislation in the Member States for the water intended for the human consumption, as implemented by the national authorities.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13443-1:2002+A1:2007(Main)
Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing
SIST EN 13443-1:2003+A1:2007

Part 1 of this European standard applies to mechanical filters for drinking water installations inside buildings, of nominal size from DN 15 to DN 100, minimum nominal pressure PN10, particle rating of 80 to 150 µm, and minimum design temperature of 30°C. It specifies requirements relating to the construction and mode of operation of filters and describes relevant methods of testing. It only concerns units which are permanently connected to the mains supply at the point of entry into the building.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14898:2006+A1:2007(Main)
Water conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing
SIST EN 14898:2006+A1:2007

This European Standard specifies requirements relating to the construction, performance and methods of testing for active media filters for drinking water installations inside buildings, with a maximum working pressure of at least 1 000 kPa and a maximum working temperature of less than 30 °C. It only concerns units, which are permanently connected to the mains supply at the point of entry or point of use.
This standard applies only to filter systems comprising a housing and filter media tested together.
It includes capsule type units where both the element and its outer housing are disposable.
NOTE   Products intended for use in water supply systems are to comply, when existing, with national regulations and testing arrangements that ensure fitness for contact with drinking water. The Member States relevant regulators and the EC Commission agreed on the principle of a future unique European Acceptance Scheme (EAS) which would provide a common testing and approval arrangement at European level.
If and when the EAS is adopted, European Standards on products will be amended by the addition of an Annex Z/EAS under Mandate M/136 which will contain formal references to the testing, certification and product marking requirements of the EAS. Until the EAS comes into force, the current national regulations remain applicable.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14897:2006+A1:2007(Main)
Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
SIST EN 14897:2006+A1:2007

This document specifies definitions, principles of construction, requirements and methods for testing the performance of UV devices for drinking water installations inside buildings which are permanently connected to the mains supply at the point of entry into a building or within the water distribution system inside the building.
UV devices in the sense of this standard are UV bactericidal treatment devices or UV disinfection devices.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13443-2:2005+A1:2007(Main)
Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing
SIST EN 13443-2:2005+A1:2007

This document specifies requirements relating to the construction, performance and methods of testing for mechanical filters for the removal of suspended matter in drinking water installations inside buildings. It applies to filters with a filtration rating from 1 µm up to less than 80 µm and which are intended for use in systems with a minimum pressure rating of PN 6, connections between DN 15 and DN 100 and service temperature of less than 30 °C.
This document is applicable to back-washable filters, integral filters and those designed for replaceable cartridges. It only concerns units that are permanently connected to the mains supply at point of entry or point of use.
Part 1 of this standard (EN 13443-1) is a separate document and deals with filters with a particle rating between
80 µm and 150 µm.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14652:2005+A1:2007(Main)
Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing
SIST EN 14652:2006+A1:2007

This European Standard specifies requirements relating to the construction, performance and methods of testing for membrane separation systems with a particle rating below 1 m, namely microfiltration (MF), ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) for drinking water installations inside buildings, intended to remove from the drinking water marginal concentrations of suspended and colloidal solids, microorganisms, organic molecules and/or to reduce the dissolved solids concentration and applies to systems with a minimum pressure of PN 10, connections between DN 15 and DN 100 and a maximum working temperature of at least 30 °C.
This European Standard applies to membrane separation systems, whose elements may be partly or entirely cleanable or disposable in accordance with the type of system. It only concerns units which are permanently connected to the mains supply at the point-of-entry or the point-of-use.
A membrane separation system may include, together with the separation device pre- and /or post-treatment devices.
For the scope of this European Standard:
-   separation device shall comply with this European Standard, i.e. without pre-and/or post-treatments;
-   where pre-and/or post-treatment devices are incorporated in the system, each of them shall conform to the relevant standard. If this is the case, the complete system shall be considered as conforming as a whole.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14812:2005+A1:2007(Main)
Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing
SIST EN 14812:2006+A1:2007

This European Standard specifies definitions, principles of construction (but not dimensions) and design, requirements on performance and operation as well as methods for testing the performance of chemical pre-set dosing systems for conditioning water intended for human consumption inside buildings (see [7]) which are permanently connected to the mains supply

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14623:2005(Main)
Devices to prevent pollution by backflow of potable water - Air gaps with minimum circular overflow (verified by test or measurement) - Family A, type G
SIST EN 14623:2005

This European Standard specifies the characteristics and the requirements of air gaps with overflow, family A, type G for nominal flow velocity not exceeding 3 m/s. Air gaps are devices for protection of potable water in water installations from pollution. This European Standard applies to air gaps in factory assembled products and to constructed air gaps in situ, and defines the physicochemical characteristics of materials of construction used for the purpose and application to ensure compliance with this document during normal working use.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day