iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN 16586-1

(Main)

Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 1: Steps for access and egress

Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 1: Steps for access and egress

This document describes the specific ‘Design for PRM use’ requirements applying to both infrastructure and rolling stock and the assessment of those requirements. The following applies to this document:
- The definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI.
- This document defines elements which are universally valid for obstacle free travelling including lighting, contrast, tactile feedback, transmission of visual and acoustic information. The definitions and requirements of this document cover the infrastructure and the rolling stock applications.
- This document only refers to aspects of accessibility for PRM passengers; it does not define non PRM related requirements and definitions.
- This document assumes that the infrastructure or rolling stock is in its defined operating condition.
- Where minimum or maximum dimensions are quoted these are absolute NOT nominal.
The ‘Accessibility of persons with reduced mobility’ standard is written in two parts:
— This document is Part 1 and contains:
— Steps for access and egress.

Bahnanwendungen - Gestaltung für die Nutzung durch PRM - Barrierefreier Zugang - Teil 1: Einstiegs- und Ausstiegsstufen

Applications ferroviaires - Conception destinée à l'usage par les PMR - Accessibilité du matériel roulant aux personnes à mobilité réduite - Partie 1: Marches de sortie et d'accès

Železniške naprave - Načrtovanje za osebe z omejenimi gibalnimi sposobnostmi - Dostop do železniških vozil - 1. del: Stopnice za vstop in izstop

General Information

Status
Not Published
Publication Date
27-Nov-2024
ICS
11.180.01 - Aids for disabled and handicapped persons in general
45.060.20 - Trailing stock
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/WG 44 - People with Reduced Mobility (PRM)
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
30-May-2024
Due Date
22-Feb-2023
Completion Date
30-May-2024
Directive
2016/797/EU - Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
M/591 - Standardisation request to the European Committee for Standardisation and the European Committee for Electrotechnical Standardisation as regards railway products in support of Directive (EU) 2016/797
Ref Project
oSIST prEN 16586-1:2022 - Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 1: Steps for access and egress

Relations

Revises
EN 16586-1:2017 - Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 1: Steps for access and egress
Effective Date
19-Jan-2023

Buy Standard

prEN 16586-1:2022prEN 16586-1:2022
PreviousNext
Draft
prEN 16586-1:2022
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 16586-1:2022
01-julij-2022
Železniške naprave - Načrtovanje za osebe z omejenimi gibalnimi sposobnostmi -
Dostop do železniških vozil - 1. del: Stopnice za vstop in izstop
Railway applications - Design for PRM use - Accessibility of persons with reduced
mobility to rolling stock - Part 1: Steps for access and egress
Bahnanwendungen - Gestaltung für die Nutzung durch PRM - Barrierefreier Zugang -
Teil 1: Einstiegs- und Ausstiegsstufen
Applications ferroviaires - Conception destinée à l'usage par les PMR - Accessibilité du
matériel roulant aux personnes à mobilité réduite - Partie 1: Marches de sortie et d'accès
Ta slovenski standard je istoveten z: prEN 16586-1
ICS:
11.180.01 Pripomočki za Aids for disabled and
onesposobljene in handicapped persons in
hendikepirane osebe na general
splošno
45.060.20 Železniški vagoni Trailing stock
oSIST prEN 16586-1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16586-1:2022

---------------------- Page: 2 ----------------------
oSIST prEN 16586-1:2022


DRAFT
EUROPEAN STANDARD
prEN 16586-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2022
ICS 11.180.01; 45.060.20 Will supersede EN 16586-1:2017
English Version

Railway applications - Design for PRM use - Accessibility of
persons with reduced mobility to rolling stock - Part 1:
Steps for access and egress
Applications ferroviaires - Conception destinée à Bahnanwendungen - Gestaltung für die Nutzung durch
l'usage par les PMR - Accessibilité du matériel roulant PRM - Barrierefreier Zugang - Teil 1: Einstiegs- und
aux personnes à mobilité réduite - Partie 1: Marches de Ausstiegsstufen
sortie et d'accès
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16586-1:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16586-1:2022
prEN 16586-1:2022 (E)
Contents Page

European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Symbols and abbreviations . 7
5 Requirements and assessment . 8
5.1 General. 8
5.2 Step position
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16586-1:2017(Main)
Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 1: Steps for access and egress
SIST EN 16586-1:2017

This European Standard describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard:
-   The definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
-   This standard defines elements which are universally valid for obstacle free travelling including steps for access and egress and boarding aids. The definitions and requirements of this standard are to be used for rolling stock applications;
-   This standard only refers to aspects of accessibility for PRM passengers it does not define general requirements and general definitions;
-   This standard assumes that the vehicle is in the defined operating condition;
-   Where minimum or maximum dimensions are quoted these are absolute NOT nominal
The ‘Accessibility of persons with reduced mobility’ standard is written in two parts:
-   This document is Part 1 and contains:
-   Steps for access and egress
-   Part 2 contains
-   Boarding aids.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16586-2:2017(Main)
Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 2: Boarding aids
SIST EN 16586-2:2017

This European Standard describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard:
-   the definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
-   this standard defines elements which are universally valid for obstacle free travelling including steps for access and egress and boarding aids. The definitions and requirements of this standard are to be used for rolling stock applications;
-   this standard only refers to aspects of accessibility for PRM passengers it does not define general requirements and general definitions;
-   this standard assumes that the vehicle is in the defined operating condition;
-   where minimum or maximum dimensions are quoted these are absolute NOT nominal.
The ‘Accessibility of persons with reduced mobility’ standard is written in two parts:
-   Part 1 contains:
-   steps for access and egress.
-   this document is Part 2 and contains:
-   boarding aids.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16585-3:2017(Main)
Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 3: Clearways and internal doors
SIST EN 16585-3:2017

This European Standard describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard:
-   the definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
-   this standard defines elements which are universally valid for obstacle free travelling including toilets, elements for sitting, standing and moving and clearways and internal doors. The definitions and requirements of this standard are to be used for rolling stock applications;
-   this standard only refers to aspects of accessibility for PRM passengers. It does not define general requirements and general definitions;
-   this standard assumes that the rolling stock is in its defined operating condition;
-   where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
The 'Equipment and components' standard is written in three parts:
-   Part 1 contains:
-   toilets;
-   Part 2 contains:
-   handholds;
-   seats;
-   wheelchair spaces;
-   this document is Part 3 and contains:
-   clearways;
-   internal doors.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16585-1:2017(Main)
Railway applications - Design for PRM use - Equipment and components onboard rolling stock - Part 1: Toilets
SIST EN 16585-1:2017

This European Standard describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard:
-   the definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
-   this standard defines elements which are universally valid for obstacle free travelling including toilets, elements for sitting, standing and moving and clearways and internal doors. The definitions and requirements of this standard are to be used for rolling stock applications;
-   this standard only refers to aspects of accessibility for PRM passengers. It does not define general requirements and general definitions;
-   this standard assumes that the rolling stock is in its defined operating condition;
-   where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
The 'Equipment and Components' standard is written in three parts:
-   this document is Part 1 and contains:
-   toilets;
-   part 2 contains:
-   handholds;
-   seats;
-   wheelchair spaces;
-   part 3 contains:
-   clearways;
-   internal doors.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16585-2:2017(Main)
Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 2: Elements for sitting, standing and moving
SIST EN 16585-2:2017

This European Standard describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard:
-   the definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
-   this standard defines elements which are universally valid for obstacle free travelling including toilets, elements for sitting, standing and moving and clearways and internal doors. The definitions and requirements of this standard are to be used for rolling stock applications;
-   this standard only refers to aspects of accessibility for PRM passengers. It does not define general requirements and general definitions;
-   this standard assumes that the rolling stock is in its defined operating condition;
-   where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
The 'Equipment and components' standard is written in three parts:
-   Part 1 contains:
-   toilets;
-   this document is Part 2 and contains:
-   handholds;
-   seats;
-   wheelchair spaces;
-   Part 3 contains:
-   clearways;
-   internal doors.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 16585-3(Main)
Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 3: Clearways and internal doors
oSIST prEN 16585-3:2022

This document describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this document:
—   The definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI
—   This document defines elements which are universally valid for obstacle-free travelling including toilets, elements for sitting, standing and moving and clearways and internal doors. The definitions and requirements of this standard are to be used for rolling stock applications
—   This document only refers to aspects of accessibility for PRM passengers; it does not define non-PRM related requirements and definitions.
—   This document assumes that the rolling stock is in its defined operating condition.
—   Where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
The 'Equipment and components' standard is written in three parts:
—   Part 1 contains:
—   Toilets
—   Part 2 contains:
—   Handholds
—   Seats
—   Wheelchair spaces
—   This document is Part 3 and contains:
—   Clearways
—   Internal doors.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 16585-1(Main)
Railway applications - Design for PRM use - Equipment and components onboard rolling stock - Part 1: Toilets
oSIST prEN 16585-1:2022

This European Standard describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard:
—   the definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
—   this standard defines elements which are universally valid for obstacle free travelling including toilets, elements for sitting, standing and moving and clearways and internal doors. The definitions and requirements of this standard are to be used for rolling stock applications;
—   this standard only refers to aspects of accessibility for PRM passengers. It does not define general requirements and general definitions;
—   this standard assumes that the rolling stock is in its defined operating condition;
—   where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
The 'Equipment and Components' standard is written in three parts:
—   this document is Part 1 and contains:
—   toilets;
—   part 2 contains:
—   handholds;
—   seats;
—   wheelchair spaces;
—   part 3 contains:
—   clearways;
—   internal doors.

  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 16585-2(Main)
Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 2: Elements for sitting, standing and moving
oSIST prEN 16585-2:2022

This European Standard describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard:
—   the definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
—   this standard defines elements which are universally valid for obstacle free travelling including toilets, elements for sitting, standing and moving and clearways and internal doors. The definitions and requirements of this standard are to be used for rolling stock applications;
—   this standard only refers to aspects of accessibility for PRM passengers. It does not define general requirements and general definitions;
—   this standard assumes that the rolling stock is in its defined operating condition;
—   where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.
The 'Equipment and components' standard is written in three parts:
—   Part 1 contains:
—   toilets;
—   this document is Part 2 and contains:
—   handholds;
—   seats;
—   wheelchair spaces;
—   Part 3 contains:
—   clearways;
—   internal doors.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 16586-2(Main)
Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 2: Boarding aids
oSIST prEN 16586-2:2022

This document describes the specific ‘Design for PRM use’ requirements applying to both infrastructure and rolling stock and the assessment of those requirements. The following applies to this document:
- The definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI.
- This document defines elements which are universally valid for obstacle free travelling including lighting, contrast, tactile feedback, transmission of visual and acoustic information. The definitions and requirements of this document cover the infrastructure and the rolling stock applications.
- This document only refers to aspects of accessibility for PRM passengers; it does not define non PRM related requirements and definitions.
- This document assumes that the infrastructure or rolling stock is in its defined operating condition.
- Where minimum or maximum dimensions are quoted these are absolute NOT nominal.
The ‘Accessibility of persons with reduced mobility’ standard is written in two parts:
- Part 2 contains:
- Boarding Aids.

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16586-1:2017(Main)
Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 1: Steps for access and egress
SIST EN 16586-1:2017

This European Standard describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard:
-   The definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
-   This standard defines elements which are universally valid for obstacle free travelling including steps for access and egress and boarding aids. The definitions and requirements of this standard are to be used for rolling stock applications;
-   This standard only refers to aspects of accessibility for PRM passengers it does not define general requirements and general definitions;
-   This standard assumes that the vehicle is in the defined operating condition;
-   Where minimum or maximum dimensions are quoted these are absolute NOT nominal
The ‘Accessibility of persons with reduced mobility’ standard is written in two parts:
-   This document is Part 1 and contains:
-   Steps for access and egress
-   Part 2 contains
-   Boarding aids.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day