EN ISO 11547:2018

Small craft - Start-in-gear protection (ISO 11547:1994)

Specifies requirements to prevent an outboard motor from being started in gear, when installed on small craft of up to 24 m length of hull.

Kleine Wasserfahrzeuge - Schutz vor Start unter Last (ISO 11547:1994)

Navires de plaisance - Dispositif de protection contre le démarrage avec vitesse en prise (ISO 11547:1994)

La présente Norme internationale fixe les prescriptions destinées à empêcher le moteur hors-bord des navires de plaisance dont la coque ne dépasse pas 24 m de longueur, de démarrer alors qu'il est en prise.

Mala plovila - Varovanje naprav za startanje (ISO 11547:1994)

Določa zahteve za preprečitev zagona zunanjega motorja v prestavi, če je nameščen na malem plovilu z dolžino trupa do 24 m.

General Information

• Status: Published
• Publication Date: 25-Sep-2018
• ICS: 47.020.20 - Marine engines and propulsion systems
• ICS: 47.080 - Small craft
• Technical Committee: CEN/TC 464 - Small Craft
• Drafting Committee: CEN/TC 464 - Small Craft
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 26-Sep-2018
• Due Date: 03-Nov-2019
• Completion Date: 26-Sep-2018
• Directive: 2003/44/EC - Approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Directive: 2013/53/EU - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Mandate: M/542 - [C(2015)8736] Standardisation Request to the European Committee for Standardisation and the European Committee for Electro-technical Standardisation as regards recreational craft and personal watercraft in support of Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC.
• Ref Project: SIST EN ISO 11547:2018 - Small craft - Start-in-gear protection (ISO 11547:1994)

Relations

• Replaces: EN ISO 11547:1995 - Small craft - Start-in-gear protection (ISO 11547:1994)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 11547:1995/A1:2000 - Small craft - Start-in-gear protection (ISO 11547:1994)
• Effective Date: 03-Oct-2018

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2018
1DGRPHãþD
SIST EN ISO 11547:2000
SIST EN ISO 11547:2000/A1:2001
Mala plovila - Varovanje naprav za startanje (ISO 11547:1994)
Small craft - Start-in-gear protection (ISO 11547:1994)
Kleine Wasserfahrzeuge - Schutz vor Start unter Last (ISO 11547:1994)
Navires de plaisance - Dispositif de protection contre le démarrage avec vitesse en prise
(ISO 11547:1994)
Ta slovenski standard je istoveten z: EN ISO 11547:2018
ICS:
47.020.20 Ladijski motorji Marine engines and
propulsion systems
47.080 ýROQL Small craft
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 11547
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2018
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 11547:1995
English Version
Small craft - Start-in-gear protection (ISO 11547:1994)
Navires de plaisance - Dispositif de protection contre le Kleine Wasserfahrzeuge - Schutz vor Start unter Last
démarrage avec vitesse en prise (ISO 11547:1994) (ISO 11547:1994)
This European Standard was approved by CEN on 16 April 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11547:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered . 4

European foreword
The text of ISO 11547:1994 has been prepared by Technical Committee ISO/TC 188 “Small craft” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 11547:2018.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall be
withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11547:1995.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2013/53/EU.
For relationship with EU Directive 2013/53/EU, see informative Annex ZA, which is an integral part of
this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
Endorsement notice
The text of ISO 11547:1994 has been approved by CEN as EN ISO 11547:2018 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered
This European standard has been prepared under a Commission’s standardization request M/542
C(2015) 8736 final to provide one voluntary means of conforming to Essential Requirements of Directive
2013/53/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive, compliance
with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of
this standard, a presumption of conformity with the corresponding Essential Requirements of that
Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex I and Annex II of
Directive 2013/53/EU
Essential Requirements Clause(s)/sub- Remarks/Notes
of Directive clause(
...