CEN/TR 17464:2020
(Main)Space - Use of GNSS-based positioning for road Intelligent Transport System (ITS) - Security attacks modelling and definition of performance features and metrics related to security
Space - Use of GNSS-based positioning for road Intelligent Transport System (ITS) - Security attacks modelling and definition of performance features and metrics related to security
The objective is to analyse the security issues that can occur at the GNSS SIS level. In order to do so, a full taxonomy of the GNSS SIS attacks are proposed and GNSS SIS attack security model are elaborated and classified. Security metrics for the validation of the GBPT robustness performances are defined.
The proposed methodology for this technical report consists in three distinct steps that are described hereunder:
I. The first step consists in providing a full taxonomy of the possible GNSS Signal in Space attacks (voluntary or not) to be considered and identify their impact at GBPT level;
II. The second step consists in regrouping narrow sets of previouslyidentified GNSS SIS attacks into security attack models. For each security attack model, an assessment of the dangerousness based on beforehand identified key parameters and methodology will be provided;
III. The third step consists in providing definition of performance objectives, security control, security metrics, and a specific procedure for a robustness evaluation of a GBPT against the identified security attack models at step II.
The results will benefit to the EN16803-3 "Assessment of security performances of GNSS based positioning terminals"
Modellierung von Sicherheitsangriffen und Definition von Leistungsmerkmalen und Sicherheitsmetriken
Espace - Utilisation de la localisation basée sur les GNSS pour les systèmes de transport routiers intelligents - Modélisation des attaques de sécurité et, définition des caractéristiques de performance et des métriques liées à la sécurité
Vesolje - Ugotavljanje položaja z uporabo sistema globalne satelitske navigacije (GNSS) pri inteligentnih transportnih sistemih (ITS) v cestnem prometu - Modeliranje varnostnih napadov ter opredelitev tehničnih značilnosti in metrike v zvezi z varnostjo
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2020
Vesolje - Ugotavljanje položaja z uporabo sistema globalne satelitske navigacije
(GNSS) pri inteligentnih transportnih sistemih (ITS) v cestnem prometu -
Modeliranje varnostnih napadov ter opredelitev tehničnih značilnosti in metrike v
zvezi z varnostjo
Space - Use of GNSS-based positioning for road Intelligent Transport System (ITS) -
Security attacks modelling and definition of performance features and metrics related to
security
Modellierung von Sicherheitsangriffen und Definition von Leistungsmerkmalen und
Sicherheitsmetriken
Espace - Utilisation de la localisation basée sur les GNSS pour les systèmes de
transport routiers intelligents - Modélisation des attaques de sécurité et, définition des
caractéristiques de performance et des métriques liées à la sécurité
Ta slovenski standard je istoveten z: CEN/TR 17464:2020
ICS:
03.220.20 Cestni transport Road transport
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL REPORT
CEN/TR 17464
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
August 2020
ICS 03.220.20; 33.060.30; 35.240.60
English version
Space - Use of GNSS-based positioning for road Intelligent
Transport System (ITS) - Security attacks modelling and
definition of performance features and metrics related to
security
Espace - Utilisation de la localisation basée sur les Modellierung von Sicherheitsangriffen und Definition
GNSS pour les systèmes de transport routiers von Leistungsmerkmalen und Sicherheitsmetriken
intelligents - Modélisation des attaques de sécurité et,
définition des caractéristiques de performance et des
métriques liées à la sécurité
This Technical Report was approved by CEN on 3 February 2020. It has been drawn up by the Technical Committee
CEN/CLC/JTC 5.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2020 CEN/CENELEC All rights of exploitation in any form and by any means Ref. No. CEN/TR 17464:2020 E
reserved worldwide for CEN national Members and for
CENELEC Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 List of acronyms . 8
5 Analysis of the GNSS attacks taxonomy . 9
5.1 Introduction . 9
5.2 Known Previous Categorization Work . 9
5.3 GNSS SiS Attacks Taxonomy . 10
6 Definition of security attack models . 12
6.1 Introduction . 12
6.2 Keys parameters . 12
6.3 Methodology . 16
6.4 Security attack Models . 17
6.5 Synthesis. 26
7 Definition of the performance security metrics . 28
7.1 Introduction . 28
7.2 Methodology . 28
7.3 Security Objectives and Controls . 28
7.4 Security Metrics Identification . 31
7.5 Robustness Performance Level Evaluation . 39
8 Conclusion. 40
Annex A (normative) Signal to noise considerations . 42
A.1 Acquisition performance . 42
A.2 GNSS SIS and interference (system performance) . 42
A.3 Receiver parameters . 43
A.4 Data demodulation . 43
Annex B (normative) Intentional and Unintentional Attacks Description . 44
B.1 Intentional attacks . 44
Bibliography . 58
European foreword
This document (CEN/TR 17464:2020) has been prepared by Technical Committee CEN-CENELEC/JTC 5
“Space”, the secretariat of which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Introduction
Performances of the PVT (Position, Velocity and Time) information provided by a GBPT (GNSS-Based
Positioning Terminal) is a key feature that has a direct impact on the reliability and performance of the
application itself. The lack of effort devoted to assess the quality of the PVT has resulted in a lack of
common assessment criteria. Being able to assess the quality of a computed PVT is a critical problem for
applications such Road user charging or autonomous driving.
The EC mandate M/496 (“Mandate addressed to CEN, CENELEC and ETSI to develop standardization
regarding space industry”) and more specifically part of the dossier 1 “Navigation and Positioning (NP)
Receivers for Road Applications” of mandate M/496 (exclusion made of airport services) stressed
European standards organizations to make assessment of necessary future standardization in support of
the regulatory framework related to positioning performances.
The mandate work related to dossier sectorial 1, especially regarding the topics mentioned above, have
been carried out by CEN/CLC TC5/WG1 and BNAE dealing with administrative management of the
standardization work.
WG1 of CEN-CLC TC5 has produced draft standards EN 16803 (all parts), Use of GNSS-based positioning
for road Intelligent Transport Systems (ITS) — Part 1: Definitions and system engineering procedures for
the establishment and assessment of performances; Part 2: Assessment field tests for basic performances of
GNSS-based positioning terminals; Part 3: Assessment of security performances of GNSS-based positioning
terminals.
Security of the GBPT in road Intelligent Transport Systems (ITS) became a critical point. Many
applications rely on PVT information provided by GNSS. If during the past GNSS SIS attacks were
considered as feasible but requiring significant technical means, it is not the case today considering that
a spoofing attack can be led with a COTS SDR at relatively low cost and that jammer are available on the
market at a wealth of prices.
In this context, receiver manufacturers began to implement new technologies fighting against SiS (Signal
in Space) GNSS attacks and major advances that have been done in the GNSS security aspects in Europe
associated to the new capabilities of the Galileo system in particular in the definition of the public
regulated service and the commercial authentication service in E6 where some member of this
consortium has been especially active.
1 Scope
The objective is to analyse the security issues that can occur at the GNSS SIS level. In order to do so, a full
taxonomy of the GNSS SIS attacks are proposed and GNSS SIS attack security model are elaborated and
classified. Security metrics for the validation of the GBPT robustness performances are defined.
The proposed methodology for this technical report consists in three distinct steps that are described
hereunder:
— The first step consists in providing a full taxonomy of the possible GNSS Signal in Space attacks
(voluntary or not) to be considered and identify their impact at GBPT level;
— The second step consists in regrouping narrow sets of previously identified GNSS SIS attacks into
security attack models. For each security attack model, an assessment of the dangerousness based
on beforehand identified key parameters and methodology will be provided;
— The third step consists in providing definition of performance objectives, security control, security
metrics, and a specific procedure for a robustness evaluation of a GBPT against the identified security
attack models at step II.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO/IEC 27001:2013, Information technology — Security techniques — Information security management
systems — Requirements
ETSI TS 103 246-3:2015, Satellite Earth Stations and Systems (SES) — GNSS based location systems —
Part 3: Performance requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ETSI TS 103 246-3 and
ISO/IEC 27001 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• ISO Online browsing platform: available at http://www.iso.org/obp
• IEC Electropedia: available at http://www.electropedia.org/
3.1
objective
result to be achieved
3.2
attack
attempt to destroy, expose, alter, disable, steal or gain unauthorized access to or make unauthorized use
of an asset
3.3
availability
property of being accessible and usable upon demand by an authorized entity
3.4
competence
ability to apply knowledge and skills to achieve intended results
3.5
data
collection of values assigned to base measures, derived measures and/or indicators
3.6
integrity
measure of the trust in the accuracy of the location-related data provided by the location system
3.7
integrity risk
risk that a positioning error is greater than a protection level per independent sample of time
3.8
threat
potential cause of an unwanted incident, which may result in harm to a system or organization
3.9
electromagnetic interference
source of RF transmission that is within the frequency band used by a communication link, and that
degrades the performance of this link
Note 1 to entry: Jamming is a particular case of electromagnetic interference.
3.10
jamming
deliberate transmission of interference to disrupt processing of wanted signals (which in this case are
GNSS or telecommunications signals)
3.11
level of risk
magnitude of a risk expressed in terms of the combination of consequences and their likelihood
3.12
likelihood
chance of something happening
3.13
continuity
likelihood that the navigation signal-in-space supports accuracy and integrity requirements for duration
of intended operation
Note 1 to entry: Continuity aids a user to start an operation during a g
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.