EN 14420-6:2004+A1:2007

Hose fittings with clamp units - Part 6: TW tank truck couplings

This document specifies the design, materials and dimensions for hose fittings with couplings for tank trucks (TW couplings).
Couplings for tank trucks in accordance to this document are intended to link hoses with connections for the transport of liquids, solid matters and gases with the exception of liquid gas and steam. They can be employed in a working pressure range of - 800 mbar up to 25 bar at working temperatures of - 20 °C up to + 65 °C. Couplings for tank trucks for other operating conditions is subject to agreement.
WARNING   Male and female dust couplings are pressure resistant plugs. They do not work as locking device, so, if pipelines remain under pressure, a locking device shall be superposed.

Schlaucharmaturen mit Klemmfassungen - Teil 6: TW Tankwagen-Kupplungen

Diese Europäische Norm legt die Konstruktion, Werkstoffe und Maße für Schlaucharmaturen mit Kupplungen für Tankwagen (TW-Kupplungen) fest.
Kupplungen für Tankwagen nach dieser Norm dienen der Verbindung von Schläuchen mit Anschlüssen zum Fördern von Flüssigkeiten, Feststoffen und Gasen, ausgenommen Flüssiggas und Dampf. Die Kupplungen können in einem Arbeitsdruckbereich von  !0,8 bar" bis !16 bar" bei Arbeitstemperaturen von
20 °C bis + 65 °C verwendet werden. Tankwagen-Kupplungen für andere Betriebsbedingungen nach Vereinbarung.
WARNUNGVater- und Mutterteil-Blindkupplungen sind druckbeständige Verschlüsse. Sie übernehmen jedoch nicht die Funktion eines Absperrorgans, das in jedem Fall vorgeschaltet sein muss, solange Leitungen unter Druck stehen.

Raccords pour flexibles avec demi-coquille - Partie 6: Raccords TW pour camion-citerne

Cevni fitingi z objemkami - 6. del: Spojke za TW cisterne

General Information

• Status: Withdrawn
• Publication Date: 23-Jan-2007
• Withdrawal Date: 09-Jul-2013
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218/WG 1 - Rubber and plastics hoses and hose assemblies for industrial, chemical and petrochemical applications
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 10-Jul-2013
• Completion Date: 10-Jul-2013
• Ref Project: SIST EN 14420-6:2005+A1:2007 - Hose fittings with clamp units - Part 6: TW tank truck couplings

Relations

• Merged From: EN 14420-6:2004 - Hose fittings with clamp units - Part 6: TW tank truck couplings
• Effective Date: 18-Jan-2023
• Replaced By: EN 14420-6:2013 - Hose fittings with clamp units - Part 6: TW tank truck couplings
• Effective Date: 03-Jul-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevni fitingi z objemkami - 6. del: Spojke za TW cisterneSchlaucharmaturen mit Klemmfassungen - Teil 6: TW Tankwagen-KupplungenRaccords pour flexibles avec demi-coquille - Partie 6: Raccords TW pour camion-citerneHose fittings with clamp units - Part 6: TW tank truck couplings23.040.60Prirobnice, oglavki in spojni elementiFlanges, couplings and jointsICS:Ta slovenski standard je istoveten z:EN 14420-6:2004+A1:2007SIST EN 14420-6:2005+A1:2007en,fr,de01-september-2007SIST EN 14420-6:2005+A1:2007SLOVENSKI
STANDARD



SIST EN 14420-6:2005+A1:2007



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14420-6:2004+A1
January 2007 ICS 23.040.70 Supersedes EN 14420-6:2004English Version
Hose fittings with clamp units - Part 6: TW tank truck couplings Raccords pour flexibles avec demi-coquille - Partie 6: Raccords TW pour camion-citerne
Schlaucharmaturen mit Klemmfassungen - Teil 6: TW Tankwagen-Kupplungen This European Standard was approved by CEN on 30 September 2004 and includes Amendment 1 approved by CEN on 13 December 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14420-6:2004+A1:2007: ESIST EN 14420-6:2005+A1:2007



EN 14420-6:2004+A1:2007 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Survey.4 4 Dimensions, designations.5 4.1 Hose fittings with TW couplings.5 4.1.1 General.5 4.1.2 Hose tail with female TW coupling.6 4.1.3 Hose tail with male TW coupling.7 4.1.4 Protecting ring.8 4.2 Male coupling (type VK).9 4.2.1 General.9 4.2.2 Components.10 4.3 Female coupling (type MK).12 4.3.1 Female coupling (type MK) DN 50 and DN 80.12 4.3.2 Female coupling (type MK) DN 100.13 4.3.3 Designation.
...