EN ISO 19115-2:2010
(Main)Geographic information - Metadata - Part 2: Extensions for imagery and gridded data (ISO 19115-2:2009)
Geographic information - Metadata - Part 2: Extensions for imagery and gridded data (ISO 19115-2:2009)
ISO 19115-2:2009 extends the existing geographic metadata standard by defining the schema required for describing imagery and gridded data. It provides information about the properties of the measuring equipment used to acquire the data, the geometry of the measuring process employed by the equipment, and the production process used to digitize the raw data. This extension deals with metadata needed to describe the derivation of geographic information from raw data, including the properties of the measuring system, and the numerical methods and computational procedures used in the derivation. The metadata required to address coverage data in general is addressed sufficiently in the general part of ISO 19115.
Geoinformation - Metadaten - Teil 2: Erweiterungen für Bild- und Rasterdaten (ISO 19115-2:2009)
Dieser Teil von ISO 19115 erweitert die bestehende Norm zu geographischen Metadaten durch Definieren
des zur Beschreibung von Bild- und Rasterdaten erforderlichen Schemas. Es werden Informationen
bereitgestellt zu den Eigenschaften der zur Datenerfassung verwendeten Messausrüstung, zu der Geometrie
des von der Ausrüstung angewendeten Messprozesses sowie zu dem zur Digitalisierung der Rohdaten
angewendeten Erzeugungsprozess. In der vorliegenden Erweiterung werden Metadaten behandelt, die zur
Beschreibung der Ableitung von Geoinformationsdaten aus Rohdaten erforderlich sind, einschließlich der
Eigenschaften des Messsystems und der numerischen Methoden und Rechenvorgänge im Zusammenhang
mit einer derartigen Ableitung. Die für Coverage-Daten im Allgemeinen erforderlichen Metadaten sind
ausführlich im allgemeinen Teil von ISO 19115 behandelt.
Information géographique - Métadonnées - Partie 2: Extensions pour les images et les matrices (ISO 19115-2:2009)
L'ISO 19115-2:2009 étend la norme existante sur les métadonnées géographiques en définissant le schéma requis de description des images et des matrices. Elle donne des informations relatives aux propriétés des équipements de mesure utilisés pour obtenir les données, la géométrie du processus de mesure utilisée par ces équipements, et le processus de production utilisé pour numériser les données brutes. Cette extension porte sur les métadonnées nécessaires pour décrire la déduction des informations géographiques à partir de données brutes, y compris les propriétés du système de mesure, et les méthodes numériques et procédures informatiques utilisées pour la déduction. Les métadonnées requises pour aborder les données de couverture en général sont suffisamment abordées dans la partie générale de l'ISO 19115.
Geografske informacije - Metapodatki - 2. del: Razširitev za podobe in mrežne podatke (ISO 19115-2:2009)
Ta del ISO 19115 razširja obstoječ geografski standard o metapodatkih z definiranjem sheme, potrebne za opisovanje podob in mrežnih podatkov. Zagotavlja informacije o lastnostih opreme za merjenje, ki se uporablja za pridobivanje podatkov, geometrijo postopka merjenja, ki ga uporablja oprema in produkcijski proces, ki se uporablja za digitalizacijo neobdelanih podatkov. Ta razširitev obravnava metapodatke, potrebne za opisovanje izpeljav geografskih informacij iz neobdelanih podatkov, vključno z lastnostmi merilnega sistema ter numerične metode in izračunske postopke, ki se uporabljajo pri izpeljavah. Metapodatki, potrebni za obravnavo vključenih podatkov na splošno, so v zadostni meri obravnavani v splošnem delu ISO 19115.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2010
Geografske informacije - Metapodatki - 2. del: Razširitev za podobe in mrežne
podatke (ISO 19115-2:2009)
Geographic information - Metadata - Part 2: Extensions for imagery and gridded data
(ISO 19115-2:2009)
Geoinformation - Metadaten - Teil 2: Erweiterungen für Bild- und Rasterdaten (ISO
19115-2:2009)
Information géographique - Métadonnées - Partie 2: Extensions pour les images et les
matrices (ISO 19115-2:2009)
Ta slovenski standard je istoveten z: EN ISO 19115-2:2010
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 19115-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2010
ICS 35.240.70
English Version
Geographic information - Metadata - Part 2: Extensions for
imagery and gridded data (ISO 19115-2:2009)
Information géographique - Métadonnées - Partie 2: Geoinformation - Metadaten - Teil 2: Erweiterungen für
Extensions pour les images et les matrices (ISO 19115- Bild- und Rasterdaten (ISO 19115-2:2009)
2:2009)
This European Standard was approved by CEN on 12 December 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19115-2:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
The text of ISO 19115-2:2009 has been prepared by Technical Committee ISO/TC 211 “Geographic
information/Geomatics” of the International Organization for Standardization (ISO) and has been taken over
as EN ISO 19115-2:2010 by Technical Committee CEN/TC 287 “Geographic Information” the secretariat of
which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2010, and conflicting national standards shall be withdrawn at the
latest by July 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 19115-2:2009 has been approved by CEN as a EN ISO 19115-2:2010 without any
modification.
INTERNATIONAL ISO
STANDARD 19115-2
First edition
2009-02-15
Geographic information — Metadata —
Part 2:
Extensions for imagery and gridded data
Information géographique — Métadonnées —
Partie 2: Extensions pour les images et les matrices
Reference number
ISO 19115-2:2009(E)
©
ISO 2009
ISO 19115-2:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
ISO 19115-2:2009(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope .1
2 Conformance.1
2.1 Conformance requirements.1
2.2 Metadata profiles .1
3 Normative references .1
4 Terms and definitions .2
5 Symbols and abbreviated terms .5
5.1 Abbreviations.5
5.2 UML notations.5
5.3 UML model relationships .6
5.4 UML model stereotypes .7
6 Imagery and gridded data metadata .8
6.1 Metadata for geospatial imagery and gridded data requirement.8
6.2 Imagery and gridded data metadata packages.8
6.3 Unified Modeling Language (UML) diagrams .12
6.4 Data dictionary.12
Annex A (normative) Imagery and gridded data metadata schemas.13
Annex B (normative) Imagery and gridded data metadata data dictionary .22
Annex C (normative) Conformance.40
Bibliography .43
ISO 19115-2:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 19115-2 was prepared by Technical Committee ISO/TC 211, Geographic information/Geomatics.
ISO 19115 consists of the following parts, under the general title Geographic information — Metadata:
⎯ Geographic information — Metadata
⎯ Part 2: Extensions for imagery and gridded data
iv © ISO 2009 – All rights reserved
ISO 19115-2:2009(E)
Introduction
Imagery and gridded data are important information sources and products used within a geospatial
environment by geographic information systems. The production of imagery and gridded data follows one or
more process chains that begin with remote sensing data, scanned maps, field data collection or other
sensing methods and end with the creation of the end data products. The production process needs to be
documented in order to maintain quality control over the end products. In addition, metadata about the
geometry of the measuring process and the properties of the measuring equipment need to be retained with
the raw data in order to support the production process.
Within the suite of ISO geographic information standards, ISO 19115 defines the guidelines for describing
geographic information and services. While the ISO 19115 metadata model does provide some provisions for
imagery and gridded data, the requirements were not fully developed at the time ISO 19115:2003 was drafted.
To permit the development of ISO 19115 to proceed, inclusion of metadata definitions for imagery and gridded
data was deferred until the framework for these data was more fully specified within the suite of ISO
geographic information standards. Additionally, other standards that implement metadata for imagery and
gridded data have been surveyed and are described in ISO/TR 19121.
The object of this part of ISO 19115 is to provide the additional structure to more extensively describe the
derivation of geographic imagery and gridded data. This structure is intended to augment ISO 19115.
INTERNATIONAL STANDARD ISO 19115-2:2009(E)
Geographic information — Metadata —
Part 2:
Extensions for imagery and gridded data
1 Scope
This part of ISO 19115 extends the existing geographic metadata standard by defining the schema required
for describing imagery and gridded data. It provides information about the properties of the measuring
equipment used to acquire the data, the geometry of the measuring process employed by the equipment, and
the production process used to digitize the raw data. This extension deals with metadata needed to describe
the derivation of geographic information from raw data, including the properties of the measuring system, and
the numerical methods and computational procedures used in the derivation. The metadata required to
address coverage data in general is addressed sufficiently in the general part of ISO 19115.
2 Conformance
2.1 Conformance requirements
Metadata shall be provided as specified in Clause 6 and Annexes A and B of this part of ISO 19115 and
ISO 19115:2003, Clause 6 and Annexes A and B.
User-defined metadata extensions to this part of ISO 19115 shall be defined and provided as specified in
ISO 19115:2003, Annex C.
Any metadata claiming conformance wi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.