EN ISO 12944-1:2017
(Main)Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:2017)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:2017)
ISO 12944-1:2017 defines the overall scope of ISO 12944 (all parts). It gives some basic terms and definitions and a general introduction to the other parts of ISO 12944. Furthermore, it includes a general statement on health, safety and environmental protection, and guidelines for using ISO 12944 (all parts) for a given project.
Beschichtungsstoffe - Korrosionsschutz von Stahlbauten durch Beschichtungssysteme - Teil 1: Allgemeine Einleitung (ISO 12944-1:2017)
In diesem Dokument wird der umfassende Anwendungsbereich von ISO 12944 (alle Teile) definiert. Es beinhaltet einige Grundbegriffe sowie eine allgemeine Einleitung zu den anderen Teilen der ISO 12944. Weiterhin enthält es eine allgemeine Aussage bezüglich Gesundheits-, Sicherheits- und Umweltschutz sowie Richtlinien zur Anwendung der ISO 12944 (alle Teile) für ein bestimmtes Projekt
Peintures et vernis - Anticorrosion des structures en acier par systèmes de peinture - Partie 1: Introduction générale (ISO 12944-1:2017)
ISO 12944-1:2017 définit le domaine général d'application de l'ISO 12944 (toutes les parties). Il donne quelques termes et définitions de base et fournit une introduction générale aux autres parties de l'ISO 12944. Enfin, il inclut un exposé général sur l'hygiène, la sécurité et la protection de l'environnement, ainsi que les principes directeurs pour l'utilisation de l'ISO 12944 (toutes les parties) dans le cadre d'un projet donné.
Barve in laki - Protikorozijska zaščita jeklenih konstrukcij z zaščitnimi premaznimi sistemi - 1. del: Splošna predstavitev (ISO 12944-1:2017)
V tem dokumentu je opredeljeno celotno področje uporabe standarda ISO 12944 (vsi deli). Podaja nekaj osnovnih pojmov in definicij ter splošen uvod v druge dele standarda ISO 12944. Poleg tega vključuje splošno izjavo o zdravju, varnosti in varovanju okolja ter smernice za uporabo standarda ISO 12944
(vsi deli) za določen projekt.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2018
1DGRPHãþD
SIST EN ISO 12944-1:1998
%DUYHLQODNL3URWLNRUR]LMVND]DãþLWDMHNOHQLKNRQVWUXNFLM]]DãþLWQLPLSUHPD]QLPL
VLVWHPLGHO 6SORãQDSUHGVWDYLWHY ,62
Paints and varnishes - Corrosion protection of steel structures by protective paint
systems - Part 1: General introduction (ISO 12944-1:2017)
Beschichtungsstoffe - Korrosionsschutz von Stahlbauten durch Beschichtungssysteme -
Teil 1: Allgemeine Einleitung (ISO 12944-1:2017)
Peintures et vernis - Anticorrosion des structures en acier par systèmes de peinture -
Partie 1: Introduction générale (ISO 12944-1:2017)
Ta slovenski standard je istoveten z: EN ISO 12944-1:2017
ICS:
25.220.20 Površinska obdelava Surface treatment
87.040 Barve in laki Paints and varnishes
91.080.13 Jeklene konstrukcije Steel structures
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 12944-1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2017
EUROPÄISCHE NORM
ICS 87.020; 91.080.13 Supersedes EN ISO 12944-1:1998
English Version
Paints and varnishes - Corrosion protection of steel
structures by protective paint systems - Part 1: General
introduction (ISO 12944-1:2017)
Peintures et vernis - Anticorrosion des structures en Beschichtungsstoffe - Korrosionsschutz von
acier par systèmes de peinture - Partie 1: Introduction Stahlbauten durch Beschichtungssysteme - Teil 1:
générale (ISO 12944-1:2017) Allgemeine Einleitung (ISO 12944-1:2017)
This European Standard was approved by CEN on 30 October 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12944-1:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 12944-1:2017) has been prepared by Technical Committee ISO/TC 35 “Paints
and varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2018, and conflicting national standards shall be
withdrawn at the latest by June 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12944-1:1998.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 12944-1:2017 has been approved by CEN as EN ISO 12944-1:2017 without any
modification.
INTERNATIONAL ISO
STANDARD 12944-1
Second edition
2017-11
Paints and varnishes — Corrosion
protection of steel structures by
protective paint systems —
Part 1:
General introduction
Peintures et vernis — Anticorrosion des structures en acier par
systèmes de peinture —
Partie 1: Introduction générale
Reference number
ISO 12944-1:2017(E)
©
ISO 2017
ISO 12944-1:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
ISO 12944-1:2017(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 General introduction to the ISO 12944 series . 3
4.1 Summary . 3
4.2 Protective functions covered . 3
4.3 Field of application . 3
4.3.1 Overview . 3
4.3.2 Type of structure . 4
4.3.3 Type of surface and surface preparation . 4
4.3.4 Type of environment . 4
4.3.5 Type of protective paint system . 4
4.3.6 Type of work . 4
4.3.7 Durability of the protective paint system . 5
5 General considerations and requirements . 5
6 Health and safety and environmental protection . 6
7 Information on the other parts of ISO 12944 . 6
Annex A (informative) Guidelines for using ISO 12944 (all parts) for a given project .8
Bibliography . 9
ISO 12944-1:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 14, Protective paint systems for steel structures.
This second edition cancels and replaces the first edition (ISO 12944-1:1998), which has been
technically revised.
The main changes compared to the previous edition are as follows:
— some parts of the scope have been moved to Clause 4;
— the terms and definitions which were not used in the main part of the standard have been deleted;
— the normative references have been updated;
— the requirements regarding sample areas have been included;
— 7.8 with reference to ISO 12944-9 has been added.
— a bibliography has been added.
A list of all parts in the ISO 12944 series can be found on the ISO website.
iv © ISO 2017 – All rights reserved
ISO 12944-1:2017(E)
Introduction
Unprotected steel in the atmosphere, in water and in soil is subjected to corrosion that can lead to
damage. Therefore, to avoid corrosion damage, steel structures are normally protected to withstand
the corrosion stresses to which they will be subjected during the service life required of the structure.
There are different ways of protecting steel structures from corrosion. ISO 12944 (all parts) deals with
protection by paint systems and covers, in the various parts, all features that are important in achieving
adequate corrosion protection. Additional or other measures are possible but require particular
agreement between the interested parties.
In order to ensure effective corrosion protection of steel structures, owners of such structures, planners,
consultants, companies carrying out corrosion protection work, inspectors of protective coatings
and manufacturers of coating materials need to have at their disposal state-of-the-art information in
concise form on corrosion protection by paint systems. It is vital that such information is as complete as
possible, unambiguous and easily understandable to avoid difficulties and misunderstandings between
the parties concerned with the practical implementation of protection work.
ISO 12944 (all parts) is intended to give this information in the form of a series of instructions. It is
written for those who have some technical knowledge. It is also assumed that the user of ISO 12944 (all
parts) is familiar with other relevant International Standards, in particular those dealing with surface
preparation.
Although ISO 12944
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.