Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 062: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed, self-locking - Product standard

This product standard defines a range of cable outlets, style K, 90°, shielded, sealed, self-locking (antirotational), for heat shrinkable boot, and/ or metallic bands for use under the following conditions:
The mating connectors are listed in EN 3660-002.
Temperature range, Class N : − 65 °C to 200 °C;
Class K : − 65 °C to 260 °C;
Class W : − 65 °C to 175 °C;
Class T : − 65 °C to 175 °C (Nickel PTFE plating);
Class Z : − 65 °C to 175 °C (Black zinc nickel plating).
Associated electrical accessories: EN 3660-033 Metallic band (for shield termination).
These cable outlets are designed for termination of overall shielding braid and/or individual cable
shields. They accommodate/permit the termination of heat shrinkable boots.

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 062: Endgehäuse, Bauform K, 90°, für wärmeschrumpfende Bauteile, Schirmanschluss, abgedichtet, selbstsichernd - Produktnorm

Diese Produktnorm legt eine Reihe von Endgehäusen, Bauform K, 90°, Schirmanschluss, abgedichtet, selbst¬sichernd (verdrehgesichert) für wärmeschrumpfende Bauteile und/oder Metallbänder für die Verwendung unter folgenden Bedingungen fest:
Die zugehörigen Steckverbinder sind in EN 3660 002 aufgeführt.
Temperaturbereich,   Klasse N   :   −65 °C bis 200 °C;
   Klasse K   :   −65 °C bis 260 °C;
   Klasse W   :   −65 °C bis 175 °C;
   Klasse T   :   −65 °C bis 175 °C (Nickel/PTFE Oberflächenschutz);
   Klasse Z   :   −65 °C bis 175 °C (schwarzer Zink Nickel Oberflächenschutz).
Zugehörige elektrische Zubehörteile: EN 3660 033 Metallband (für Schirmanschluss).
Diese Endgehäuse ermöglichen den Anschluss von Gesamtschirmen und/oder Einzelleitungsschirmen. Sie nehmen wärmeschrumpfende Bauteile auf oder ermöglichen das Anbringen.

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 062 : Raccord, type K, coudé à 90°, blindé, étanche, pour manchon thermorétractable, à freinage interne - Norme de produit

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 062. del: Kabelska spojka, tip K, 90°, za toplotno skrčljive dele, oklopljena, tesnjena, samozapiralna - Standard za proizvod

Ta standard za proizvod opredeljuje različne vrste kabelskih spojk tipa K, 90°, ki so oklopljene, tesnjene, samozapiralne (nerotacijske), za toplotno skrčljive dele in/ali kovinske trakove za uporabo v naslednjih pogojih.
Stikalni priključki so navedeni v standardu EN 3660-002.
Temperaturno območje, razred N: od −65 °C do 200 °C;
razred K: od −65 °C do 260 °C;
razred W: od −65 °C do 175 °C;
razred T: od −65 °C do 175 °C (nikljeva prevleka PTFE);
razred Z: od −65 °C do 175 °C (črna cink-nikljeva prevleka).
Povezani električni dodatki: EN 3660-033 Kovinski trak (za zaključni oklop).
Te kabelske spojke so zasnovane za zaključitev celotne oklopljene pletenice in/ali posameznih kabelskih
oklopov. Omogočajo/dovoljujejo zaključevanje toplotno skrčljivih delov.

General Information

Status
Published
Publication Date
30-Aug-2022
Withdrawal Date
29-Nov-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
04-May-2022
Completion Date
04-May-2022

Relations

Buy Standard

Standard
EN 3660-062:2022
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3660-062:2022
01-julij-2022
Nadomešča:
SIST EN 3660-062:2016

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje -

062. del: Kabelska spojka, tip K, 90°, za toplotno skrčljive dele, oklopljena,
tesnjena, samozapiralna - Standard za proizvod

Aerospace series - Cable outlet accessories for circular and rectangular electrical and

optical connectors - Part 062: Cable outlet, style K, 90°, for heat shrinkable boot,

shielded, sealed, self-locking - Product standard
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und
Rechtecksteckverbinder - Teil 062: Endgehäuse, Bauform K, 90°, für
wärmeschrumpfende Bauteile, Schirmanschluß, abgedichtet, selbstsichernd -
Produktnorm

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires

électriques et optiques - Partie 062 : Raccord, type K, coudé à 90°, blindé, étanche, pour

manchon thermorétractable, à freinage interne - Norme de produit
Ta slovenski standard je istoveten z: EN 3660-062:2022
ICS:
31.220.99 Druge elektromehanske Other electromechanical
komponente components
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3660-062:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3660-062:2022
---------------------- Page: 2 ----------------------
SIST EN 3660-062:2022
EN 3660-062
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2022
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3660-062:2016
English Version
Aerospace series - Cable outlet accessories for circular and
rectangular electrical and optical connectors - Part 062:
Cable outlet, style K, 90°, for heat shrinkable boot,
shielded, sealed, self-locking - Product standard

Série aérospatiale - Accessoires arrière pour Luft- und Raumfahrt - Endgehäuse für elektrische und

connecteurs circulaires et rectangulaires électriques et optische Rund- und Rechtecksteckverbinder - Teil 062:

optiques - Partie 062 : Raccord, type K, coudé à 90°, Endgehäuse, Bauform K, 90°, für wärmeschrumpfende

blindé, étanche, pour manchon thermorétractable, à Bauteile, Schirmanschluß, abgedichtet, selbstsichernd -

freinage interne - Norme de produit Produktnorm
This European Standard was approved by CEN on 26 August 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3660-062:2022 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3660-062:2022
EN 3660-062:2022 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

Scope .................................................................................................................................................................... 4

Normative references .................................................................................................................................... 4

Terms and definitions ................................................................................................................................... 5

Characteristics ................................................................................................................................................. 5

Tests ................................................................................................................................................................... 11

Designation ..................................................................................................................................................... 19

Marking ............................................................................................................................................................. 19

Technical specification ............................................................................................................................... 19

Annex A (informative) Standard evolution form .............................................................................................. 20

---------------------- Page: 4 ----------------------
SIST EN 3660-062:2022
EN 3660-062:2022 (E)
European foreword

This document (EN 3660-062:2022) has been prepared by the Aerospace and Defence Industries

Association of Europe — Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of

ASD, prior to its presentation to CEN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by November 2022, and conflicting national standards shall

be withdrawn at the latest by November 2022.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN 3660-062:2016.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,

Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,

Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North

Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United

Kingdom.
---------------------- Page: 5 ----------------------
SIST EN 3660-062:2022
EN 3660-062:2022 (E)
Scope

This product standard defines a range of cable outlets, style K, 90°, shielded, sealed, self-locking (anti-

rotational), for heat shrinkable boot, and/ or metallic bands for use under the following conditions:

The mating connectors are listed in EN 3660-002.
Temperature range, Class N : − 65 °C to 200 °C;
Class K : − 65 °C to 260 °C;
Class W : − 65 °C to 175 °C;
Class T : − 65 °C to 175 °C (Nickel PTFE plating);
Class Z : − 65 °C to 175 °C (Black zinc nickel plating).

Associated electrical accessories: EN 3660-033 Metallic band (for shield termination).

These cable outlets are designed for termination of overall shielding braid and/or individual cable

shields. They accommodate/permit the termination of heat shrinkable boots.
Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

EN 2591 , Aerospace series — Elements of electrical and optical connection — Test methods

EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and

optical connectors — Part 001: Technical specification

EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and

optical connectors — Part 002: Index of product standards

EN 3660-033, Aerospace series — Cable outlet accessories for circular and rectangular electrical and

optical connectors — Part 033: Stainless steel banding band, style Z, for attachment of individual and/or

overall screens to cable outlets — Product standard

EN 3909, Aerospace series — Test fluids and test methods for electrical and optical components and

sub-assemblies
EN 60529, Degrees of protection provided by enclosures (code IP)
DIN 82, Knurls
*) All its parts quoted in this document.
---------------------- Page: 6 ----------------------
SIST EN 3660-062:2022
EN 3660-062:2022 (E)
Terms and definitions

For the purposes of this document, the terms and definitions given in EN 3660-001 apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

• ISO Online browsing platform: available at http://www.iso.org/obp
• IEC Electropedia: available at http://www.electropedia.org/
3.1
self-locking/anti rotational

a self-locking or anti rotational mechanism provides a nut rotation with moderate torque in the mated

direction and provides a greater torque in the unmated direction
Characteristics
4.1 Dimensions and mass

For dimensions and mass, see Figures 1 to Figure 3 and Table 1, Table 2 to Table 5.

For cable entry dimensions, see 4.2.
---------------------- Page: 7 ----------------------
SIST EN 3660-062:2022
EN 3660-062:2022 (E)
Key
1) O-Ring
2) Thread C
3) Marking
4) Four (4) tooling holes spaced 90°apart. Ø 2,60, depth, 1,27
5) Straight knurl. Pitch manufacturer’s option
6) Number of teeth N

7) RKV 08 DIN 82. Figure 2. (Please note there may be crossover dependent on diameter and pitch)

8) Minimum penetration of Ø D from the front of serrations
9) Optional clearance feature, see Table 2.
10) Break edge

NOTE 1 Cable outlets may be manufactured as cast, fabricated or machined (manufactures option).

NOTE 2 No sharp edges/burrs permissible on internal or external surfaces/joints.
Surface finish of on all internal surfaces.

NOTE 3 Reference clearance feature (9) when nut is in the uncoupled position the nut shall not contact the shell

body.

NOTE 4 Valley of start of tooth to be at vertical centre line of accessory at position shown:

• within ± 3° for shell sizes 09-13;
• within ± 2° for shell sizes 15-19;
• within ± 1° for shell sizes 21 and larger.
Figure 1 — Cable outlet
---------------------- Page: 8 ----------------------
SIST EN 3660-062:2022
EN 3660-062:2022 (E)
Table 1 — Fixed dimensions of shell
Dimensions in millimetres
C E G J I N
∅ A ∅ B ∅ D ∅ H
Shell
size
Number
max. max. Thread min. max. max. max. max. min.
of teeth
09 21,79 15,24 M12 × 1,0-6H 6,7 16,76 14,85 10,2 31,05 2,9 12
11 24,99 18,21 9,9 16,76 16,60 13,7 34,21 2,9 16
M15 × 1,0-6H
13 29,39 21,18 12,8 16,76 18,15 16,8 37,95 2,9 20
M18 × 1,0-6H
15 32,49 25,14 16,0 16,76 19,50 17,9 39,65 2,9 24
M22 × 1,0-6H
17 35,71 28,12 M25 × 1,0-6H 19,2 16,76 21,10 21,2 41,25 2,9 28
19 38,50 31,09 21,4 16,76 22,10 23,2 43,75 2,9 32
M28 × 1,0-6H
21 41,70 34,06 24,6 16,76 23,60 26,2 46,91 2,9 36
M31 × 1,0-6H
23 44,91 36,90 27,7 16,76 25,20 29,4 50,10 2,9 40
M34 × 1,0-6H
25 47,98 39,88 M37 × 1,0-6H 30,9 16,76 26,90 32,6 53,26 1,7 44
Table 2 — Feature 9 dimensions (optional)
Dimensions in millimetres
Shell K
Depth of
size
flat
max.
max.
09 0,60 11,20
11 0,60 12,80
13 0,60 15,00
15 0,60 16,55
17 0,60 18,15
19 0,60 19,55
21 0,60 21,15
23 0,60 22,75
25 0,60 24,30
---------------------- Page: 9 ----------------------
SIST EN 3660-062:2022
EN 3660-062:2022 (E)
Table 3 — Mass for classes K, N, W, T and Z
Dimensions in grams
Shell Cable entry size code
size Classes
A B C D E F G H J K L M
code
N,T,
13,3 13,6 14,7 15,5 — — — — — — — —
W,Z
33,8 34,4 4
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.