Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements

This part of this European Standard gives a technical specification for rovings that are made from continuous filament textile glass. It defines those parameters which shall be specified plus other parameters which may be specified if required for a particular application or processing method.
The specification does not define absolute or nominal values for any parameter. The value of a specified parameter is to be defined by the manufacturer but this specification defines the method of test to be used to determine the value of each specified parameter and the tolerance about which the parameter shall be controlled by the manufacturer.
The parameters which shall always be defined in any roving specification are defined in clause 4.1 and 4.2. The other parameters which are included in a specification shall either be nominated by the manufacturer or agreed between manufacturer and customer. These parameters are defined in clause 4.3.

Verstärkungsfasern - Spezifikation für Textilglasrovings - Teil 3: Besondere Anforderungen

Renforts - Spécification des stratifils (rovings) de verre textile - Partie 3: Exigences spécifiques

Ojačitve - Specifikacije za snopiče (roving) steklenih vlaken - 3. del: Posebne zahteve

General Information

Status
Published
Publication Date
03-Dec-2002
Technical Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Dec-2022

Buy Standard

Standard
EN 14020-3:2003
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.]DKWHYHVerstärkungsfasern - Spezifikation für Textilglasrovings - Teil 3: Besondere AnforderungenRenforts - Spécification des stratifils (rovings) de verre textile - Partie 3: Exigences spécifiquesReinforcements - Specification for textile glass rovings - Part 3: Specific requirements59.100.10Materiali iz steklenih vlakenTextile glass materialsICS:Ta slovenski standard je istoveten z:EN 14020-3:2002SIST EN 14020-3:2003en01-maj-2003SIST EN 14020-3:2003SLOVENSKI
STANDARD



SIST EN 14020-3:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14020-3December 2002ICS 59.100.10English versionReinforcements - Specification for textile glass rovings - Part 3:Specific requirementsRenforts - Spécification des stratifils (rovings) de verretextile - Partie 3: Exigences spécifiquesVerstärkungsfasern - Spezifikation für Textilglasrovings -Teil 3: Besondere AnforderungenThis European Standard was approved by CEN on 7 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14020-3:2002 ESIST EN 14020-3:2003



EN 14020-3:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Specification.5Bibliography.7SIST EN 14020-3:2003



EN 14020-3:2002 (E)3ForewordThis document (EN 14020-3:2002) has been prepared by Technical Committee CEN /TC 249 "Plastics", thesecretariat of which is held by IBN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by June 2003, and conflicting national standards shall be withdrawn at the latest byJune 2003.This document is one part of EN 14020 which is structured as follows:¾ Part 1 : Designation¾ Part 2 : Test methods and general requirements¾ Part 3 : Specific requirementsAccording to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 14020-3:2003



EN 14020-3:2002 (E)41 ScopeThis part of this European Standard gives a technical specification for rovings that are made from continuousfilament textile glass. It defines those parameters which shall be specified plus other parameters which may bespecified if required for a particular application or processing method.The specification does not define absolute or nominal values for any parameter. The value of a specified parameteris to be defined by the manufacturer but this specification defines the method of test to be used to determine thevalue of each specified parameter and the tolerance about which the parameter shall be controlled by themanufacturer.The parameters which shall always be defined in any roving specification are defined in clause 4.1 and 4.2. Theother parameters which are included in a specification shall either be nominated by the manufacturer or agreedbetween manufacturer and customer. These parameters are defined in clause 4.3.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thes
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.