EN ISO/IEC 15419:2010

Information technology - Automatic identification and data capture techniques - Bar code digital imaging and printing performance testing (ISO/IEC 15419:2009)

ISO/IEC 15419:2009 describes the characteristics and defines categories of bar code digital imaging systems, identifies the attributes of each system which are required to be controlled, and specifies minimum requirements for those attributes. It defines test methods for assessing the conformance of those attributes with ISO/IEC 15419:2009. It is intended to be used in conjunction with International Standards which detail the methodology for assessing the quality of a bar code symbol, such as ISO/IEC 15416. ISO/IEC 15419:2009 does not apply to Bar Code Masters, which are covered by ISO/IEC 15421.

Informationstechnik - Verfahren der automatischen Identifikation und Datenerfassung - Leistungsanforderungen für digitale Bild- und Druckverarbeitung für Strichcodes (ISO/IEC 15419:2009)

Technologies de l'information - Techniques automatiques d'identification et de capture des données - Test de performance de la numérisation digitale et l'impression des codes à barres (ISO/IEC 15419:2009)

L'ISO/CEI 15419:2009 décrit les caractéristiques et définit les catégories de systèmes d'imagerie numérique à codes à barres, identifie les attributs de chaque système qui doivent être contrôlés et spécifie les exigences minimales pour ces attributs. Elle définit les méthodes d'évaluation de la conformité de ces attributs par rapport à l'ISO/CEI 15419:2009. Elle est destinée à être utilisée conjointement aux Normes internationales qui présentent en détail la méthodologie d'évaluation de la qualité d'un symbole de code à barres, telles que l'ISO/CEI 15416. L'ISO/CEI 15419:2009 ne s'applique pas aux codes à barres de base, qui sont couverts par l'ISO/CEI 15421.

Informacijska tehnologija - Tehnike za samodejno razpoznavanje in zajem podatkov - Digitalni prikaz črtnih kod in preskušanje tiskalnih zmogljivosti (ISO/IEC 15419:2009)

Ta mednarodni standard opisuje značilnosti in določa kategorije sistemov z digitalnim prikazom črtnih kod, določa atribute posameznega sistema, katere je potrebno nadzorovati, ter določa minimalne zahteve za te atribute. Določa preskusne metode za ocenjevanje skladnosti teh atributov s tem mednarodnim standardom. Namenjen je za uporabo skupaj z mednarodnimi standardi, ki podrobno opisujejo metodologijo za ocenjevanje kvalitete simbola črtne kode, kot so ISO/IEC 15416. Ta mednarodni standard ne velja za mojstre črtne kode, ki so zajeti z ISO/IEC 15421.

General Information

• Status: Published
• Publication Date: 10-Aug-2010
• Withdrawal Date: 27-Feb-2011
• ICS: 35.040 - Information coding
• ICS: 35.040.50 - Automatic identification and data capture techniques
• Technical Committee: CEN/TC 225 - AIDC technologies
• Drafting Committee: CEN/TC 225 - AIDC technologies
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 11-Aug-2010
• Due Date: 25-Aug-2011
• Completion Date: 11-Aug-2010
• Ref Project: SIST EN ISO/IEC 15419:2010 - Information technology - Automatic identification and data capture techniques - Bar code digital imaging and printing performance testing (ISO/IEC 15419:2009)

Relations

• Replaces: EN ISO/IEC 15419:2002 - Information technology - Automatic identification and data capture techniques - Bar code digital imaging and printing performance testing (ISO/IEC 15419:2001)
• Effective Date: 14-Aug-2010

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2010
1DGRPHãþD
SIST EN ISO/IEC 15419:2003
,QIRUPDFLMVNDWHKQRORJLMD7HKQLNH]DVDPRGHMQRUD]SR]QDYDQMHLQ]DMHP
SRGDWNRY'LJLWDOQLSULND]þUWQLKNRGLQSUHVNXãDQMHWLVNDOQLK]PRJOMLYRVWL
,62,(&
Information technology - Automatic identification and data capture techniques - Bar code
digital imaging and printing performance testing (ISO/IEC 15419:2009)
Informationstechnik - Verfahren der automatischen Identifikation und Datenerfassung -
Leistungsanforderungen für digitale Bild- und Druckverarbeitung für Strichcodes
(ISO/IEC 15419:2009)
Technologies de l'information - Techniques automatiques d'identification et de capture
des données - Test de performance de la numérisation digitale et l'impression des codes
à barres (ISO/IEC 15419:2009)
Ta slovenski standard je istoveten z: EN ISO/IEC 15419:2010
ICS:
35.040 Nabori znakov in kodiranje Character sets and
informacij information coding
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO/IEC 15419
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2010
ICS 35.040 Supersedes EN ISO/IEC 15419:2002
English Version
Information technology - Automatic identification and data
capture techniques - Bar code digital imaging and printing
performance testing (ISO/IEC 15419:2009)
Technologies de l'information - Techniques automatiques Informationstechnik - Verfahren der automatischen
d'identification et de capture des données - Test de Identifikation und Datenerfassung -
performance de la numérisation digitale et l'impression des Leistungsanforderungen für digitale Bild- und
codes à barres (ISO/IEC 15419:2009) Druckverarbeitung für Strichcodes (ISO/IEC 15419:2009)
This European Standard was approved by CEN on 29 July 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/IEC 15419:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO/IEC 15419:2009 has been prepared by Technical Committee ISO/IEC JTC 1 “Information
technology”of the International Organization for Standardization (ISO) and the International Electrotechnical
Commission (IEC) and has been taken over as EN ISO/IEC 15419:2010 by Technical Committee
CEN/TC 225 “AIDC technologies” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2011, and conflicting national standards shall be withdrawn
at the latest by February 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO/IEC 15419:2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO/IEC 15419:2009 has been approved by CEN as a EN ISO/IEC 15419:2010 without any
modification.
INTERNATIONAL ISO/IEC
STANDARD 15419
Second edition
2009-06-01
Information technology — Automatic
identification and data capture
techniques — Bar code digital imaging
and printing performance testing
Technologies de l'information — Techniques automatiques
d'identification et de capture des données — Test de performance de la
numérisation digitale et l'impression des codes à barres

Reference number
ISO/IEC 15419:2009(E)
©
ISO/IEC 2009
ISO/IEC 15419:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO/IEC 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2009 – All rights reserved

ISO/IEC 15419:2009(E)
Contents Page
Foreword. iv
Introduction . vi
1 Scope .1
2 Normative references .1
3 Terms, definitions, and abbreviated terms .1
4 Bar code design software .3
4.1 General requirements.3
4.2 Considerations by software and imaging device categories.3
4.3 Test requirements.8
4.4 Conformance.8
4.5 Test report .9
5 Dedicated bar code printers .10
5.1 Data input requirements .10
5.2 Test requirements.10
5.3 Conformance.12
5.4 Test report .13
Annex A (normative) Sample test layout .14
Annex B (normative) General constructional and operational requirements.15
Annex C (informative) Maintenance and supplies .16
Annex D (informative) Classification of software categories .18
Annex E (informative) Classification of imaging categories.20
Annex F (informative) Programmer’s examples.21
Annex G (informative) Functions of bar code production software .25
Bibliography .26
© ISO/IEC 2009 – All rights reserved iii

ISO/IEC 15419:2009(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 15419 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 31, Automatic identification and data capture techniques.
This second edition cancels and replaces the first edition (ISO/IEC 15419:2001), which has been technically
revised.
iv © ISO/IEC 2009 – All rights reserved

ISO/IEC 15419:2009(E)
Introduction
Bar code technology is based on the recognition of patterns encoded in bars and spaces of defined
dimensions according to rules defining the translation of characters into such patterns, known as the
symbology specification.
Bar code digital imaging systems must be capable of reliably converting the information to be encoded into a
bar code symbol meeting the symbology specification and application requirements if the technology is to fulfil
its basic objective. Such systems comprise two major components, namely the hardware device which
produces the physical image of the bar code symbol on paper, photographic film, printing plate, or other
substrate, and the associated software which converts the input data into digital instructions used to drive the
hardware device. Each component can take many forms and perform differing functions.
Manufacturers of bar code equipment, the producers of bar code symbols and the users of bar code
technology therefore require publicly available standard test specifications for bar code digital imaging
systems to ensure the accuracy and consistency of performance of these systems. This International
Standard is intended to lay down general principles governing the bar code image generation function in each
component, supplemented by more specific details applicable to certain major categories of software and
hardware.
© ISO/IEC 2009 – All rights reserved v

INTERNATIONAL STANDARD ISO/IEC 15419:2009(E)

Information technology — Automatic identification and data
capture techniques — Bar code digital
...