EN ISO 11212-1:1997

Starch and derived products - Heavy metals content - Part 1: Determination of arsenic content by atomic absorption spectrometry (ISO 11212-1:1997)

Migrated from Progress Sheet (TC Comment) (2000-07-10): According to a PC4 recommendation, CEN/BT agreed to launch a parallel voting ++ procedure on the draft international standard derived from the above ++ mentionned subject (Ref.nr. in ISO 11212).

Stärke und Stärkederivate - Schwermetallgehalt - Teil 1: Bestimmung des Arsengehaltes durch Atomabsorptionsspektrometrie (ISO 11212-1:1997)

Dieser Teil von ISO 11212 legt ein Verfahren für die Bestimmung des Arsengehaltes von Stärke, einschließlich von Derivaten und Nebenprodukten, durch Atomabsorptionsspektrometrie mit Hydriderzeugung fest. Die gegenwärtig verfügbaren Hydriderzeuger verwenden sehr verschiedene Verfahren; es ist folglich unmöglich, ein umfassendes Verfahren vorzuschlagen, das das Erreichen von zufriedenstellenden Ergebnissen für alle Gerätetypen sicherzustellt.

Amidons, fécules et produits dérivés - Teneur en métaux lourds - Partie 1: Détermination de la teneur en arsenic par spectrométrie d'absorption atomique (ISO 11212-1:1997)

La présente partie de l'ISO 11212 prescrit une méthode pour la détermination de la teneur en arsenic dans les amidons, fécules, produits dérivés et sous-produits d'amidonnerie par spectrométrie d'absorption atomique avec génération d'hydrures. Les appareils générateurs d'hydrures actuellement commercialisés utilisant des techniques très différentes, il est donc impossible de proposer une méthode détaillée susceptible de garantir l'obtention de résultats satisfaisants sur tous les types d'appareils. Il convient donc que chaque analyste procède à l'optimisation des conditions d'utilisation de son propre instrument sur la base des recommandations générales ou particulières qui lui sont données.

Škrob in škrobni derivati - Delež težkih kovin - 1. del: Določevanje arzena z atomsko absorpcijsko spektrometrijo (ISO 11212-1:1997)

General Information

• Status: Published
• Publication Date: 14-Mar-1997
• Withdrawal Date: 29-Sep-1997
• ICS: 67.180 - Sugar. Sugar products. Starch
• Technical Committee: CEN/SS C10 - Starch
• Drafting Committee: CEN/SS C10 - Starch
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 16-Jul-2001
• Completion Date: 16-Jul-2001
• Ref Project: SIST EN ISO 11212-1:1998 - Starch and derived products - Heavy metals content - Part 1: Determination of arsenic content by atomic absorption spectrometry (ISO 11212-1:1997)

Relations

• Child: EN ISO 11212-2:1997 - Starch and derived products - Heavy metals content - Part 2: Determination of mercury content by atomic absorption spectrometry (ISO 11212-2:1997)
• Effective Date: 22-Dec-2008
• Child: EN ISO 11212-4:1997 - Starch and derived products - Heavy metals content - Part 4: Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization (ISO 11212-4:1997)
• Effective Date: 22-Dec-2008
• Child: EN ISO 11212-3:1997 - Starch and derived products - Heavy metals content - Part 3: Determination of lead content by atomic absorption spectrometry with electrothermal atomization (ISO 11212-3:1997)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-1998
âNURELQãNUREQLGHULYDWL'HOHåWHåNLKNRYLQGHO'RORþHYDQMHDU]HQD]
DWRPVNRDEVRUSFLMVNRVSHNWURPHWULMR,62
Starch and derived products - Heavy metals content - Part 1: Determination of arsenic
content by atomic absorption spectrometry (ISO 11212-1:1997)
Stärke und Stärkederivate - Schwermetallgehalt - Teil 1: Bestimmung des Arsengehaltes
durch Atomabsorptionsspektrometrie (ISO 11212-1:1997)
Amidons, fécules et produits dérivés - Teneur en métaux lourds - Partie 1: Détermination
de la teneur en arsenic par spectrométrie d'absorption atomique (ISO 11212-1:1997)
Ta slovenski standard je istoveten z: EN ISO 11212-1:1997
ICS:
67.180.20 Škrob in izdelki iz njega Starch and derived products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL
STANDARD
First edition
1997-03-I 5
Starch and derived products - Heavy
metals content -
Part 1:
Determination of arsenic content by atomic
absorption spectrometry
Amidons, f&u/es et produits d&iv& - Teneur en mktaux lourds -
Partie 1: Ddtermination de la teneur en arsenic par spectromktrie
d ’absorption atomique
Reference number
IS0 11212-1:1997(E)
IS0 11212-1:1997(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work of
preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 11212-l was prepared by Technical Committee
ISOmC 93, Starch (including derivatives and by-products).
IS0 11212 consists of the following parts, under the general title Starch
and derived products - Heavy metals content.
- Pall 1: Determination of arsenic content by atomic absorption
spectrometry
- Part 2: Determination of mercury content by atomic absorption
spectrometry
- Part 3: Determination of lead content by atomic absorption
spectrometry with electrothermal atomization
- Pan 4: Determination of cadmium content by atomic absorption
spectrometry with electrothermal atomization
Annex A of this part of IS0 11212 is for information only.
0 IS0 1997
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 l CH-1211 Geneve 20 l Switzerland
Internet central @ iso.ch
x.400
c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii
IS0 11212=1:1997(E)
INTERNATIONAL STANDARD @ Iso
Starch and derived products - Heavy metals content -
Part 1:
Determination of arsenic content by atomic absorption spectrometry
1 Scope
This part of IS0 11212 specifies a method for the determination of the arsenic content of starch, including
derivatives and by-products, by atomic absorption spectrometry with hybride generation.
The hybride generators currently available use very different techniques; it is thus impossible to propose a
comprehensive method likely to ensure the attainment of satisfactory results on all types of apparatus. Each analyst
should therefore optimize the conditions of use of his/her own apparatus on the basis of general or particular
instructions.
2 Definition
For the purposes of this part of IS0 11212, the following definition applies.
2.1 arsenic content: Quantity of arsenic determined in accordance with the conditions specified in this method
and expressed as arsenic (As), in micrograms per kilogram of the product as received.
3 Principle
Wet digestion of the organic matrix. Reduction of arsenic (As3+) to arsenic hydride by hydrogen resulting from the
action of sodium borohydride on hydrochloric acid. Entrainment of the hydride form by a flow of gas and
determination by atomic absorption spectrometry in a heated quartz cell.
Measurement of the absorbance at a wavelength of 193,7 nm.
Determination of the concentration of arsenic in the sample by means of a calibration curve.
4 Reagents
Use only reagents’ of recognized analytical grade and distilled water or water of equivalent purity.
4.1 Nitric acid (pzO = I,38 g/ml).
4.2 Hydrogen peroxide, 30 % (VW) solution.

@ IS0
IS0 11212=1:1997(E)
4.3 Sodium borohydride solution
Prepare a solution at the concentration recommended in the instructions for use of the hydride generator (5.3).
4.4 Hydrochloric acid solution
Prepare a solution at the concentration recommended in the instructions for use of the hydride generator (5.3).
4.5 Arsenic standard solution, 1 g/l.
Standard solutions are commercially available at this concentration. These solutions may be prepared by weighing
and dissolving the salt or metal of known purity.
4.6 Calibration solutions
Before each series of measurements, prepare from the standard arsenic solution (4.5) at least five calibration
solutions covering the range of concentrations to be determined. 100 ml of each calibration solution shall contain
73 ml of nitric acid (4.1).
5 Apparatus
All the glassware used shall be previously washed by means of suitable products (such as nitric acid) and rinsed
with distilled water to eliminate any trace of arsenic.
Use ordinary laboratory apparatus and, in particular, the following.
5.1 Digestion apparatus (see figure I), made of borosilicate glass and consisting of three elements terminating
with conical ground joints (5.1 .I to 5.1.3).
5.1.1 Soxhlet extraction tube, of capacity 200 ml, equipped with a stopcock and a lateral tube connected directly
to the flask (5.1.3).
51.2 Cooling apparatus, 35 cm long, con
...