Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2024)

This document specifies how a preliminary welding procedure specification (pWPS) is qualified by welding procedure tests.
This document specifies the conditions for the execution of welding procedure tests and the qualification range for welding procedures for all practical welding operations within the range of variables listed in Clause 8.
This document specifies the required tests. Additional tests can be required by application standards.
This document applies to the arc welding of titanium, zirconium and their alloys in all product forms. Arc welding is covered by the following processes in accordance with ISO 4063:
131 – metal inert gas welding, MIG welding;
14 – tungsten inert gas welding, TIG welding;
15 – plasma arc welding.
The principles of this document can be applied to other fusion welding processes.

Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißverfahrensprüfung - Teil 5: Lichtbogenschweißen von Titan, Zirkonium und ihren Legierungen (ISO 15614-5:2024)

Dieses Dokument legt fest, wie eine vorläufige Schweißanweisung (pWPS, en: preliminary welding procedure specification) durch Schweißverfahrensprüfungen qualifiziert wird.
Dieses Dokument legt die Bedingungen für die Durchführung der Schweißverfahrensprüfungen und den Geltungsbereich für Schweißverfahren für alle praktischen schweißtechnischen Tätigkeiten innerhalb des Bereiches der Einflussgrößen nach Abschnitt 8 fest.
Dieses Dokument legt die geforderten Prüfungen fest. Zusätzliche Prüfungen können durch Anwendungsnormen gefordert werden.
Dieses Dokument wird angewendet beim Lichtbogenschweißen von Titan, Zirconium und ihren Legierungen in allen Produktformen. Lichtbogenschweißen umfasst die folgenden Schweißprozesse nach ISO 4063:
131 — Metall Inertgasschweißen (MIG Schweißen);
14 — Wolfram Inertgasschweißen (WIG Schweißen);
15 — Plasmaschweißen.
Die Grundsätze dieses Dokuments können bei anderen Schmelzschweißverfahren angewendet werden.

Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 5: Soudage à l'arc sur titane, zirconium et leurs alliages (ISO 15614-5:2024)

Le présent document spécifie comment un descriptif de mode opératoire de soudage préliminaire (DMOS-P) est qualifié par épreuve.
Le présent document spécifie les conditions d'exécution des épreuves de qualification de mode opératoire de soudage et le domaine de validité du mode opératoire de soudage, pour toutes les opérations pratiques de soudage englobant la liste des variables mentionnées à l'Article 8.
Le présent document spécifie les contrôles, examens et essais à réaliser. Des contrôles, examens et essais complémentaires peuvent être exigés par des normes d'application.
Le présent document s’applique au soudage à l’arc du titane, du zirconium et de leurs alliages sous toutes formes. Le soudage à l’arc est couvert par les procédés suivants conformément à l’ISO 4063:
131 – soudage à l’arc sous protection de gaz inerte (soudage MIG) avec fil plein;
14 – soudage à l’arc sous protection de gaz inerte avec électrode de tungstène (soudage TIG);
15 – soudage plasma.
Les principes du présent document peuvent s’appliquer à d’autres procédés de soudage par fusion.

Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega postopka - 5. del: Obločno varjenje titana, cirkonija in njunih zlitin (ISO 15614-5:2024)

General Information

Status
Published
Publication Date
10-Sep-2024
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-Sep-2024
Completion Date
11-Sep-2024

Relations

Buy Standard

Draft
prEN ISO 15614-5:2022
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN ISO 15614-5:2022
01-april-2022
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega
postopka - 5. del: Obločno varjenje titana, cirkonija in njunih zlitin (ISO/DIS 15614-
5:2022)
Specification and qualification of welding procedures for metallic materials - Welding
procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO/DIS
15614-5:2022)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißverfahrensprüfung - Teil 5: Lichtbogenschweißen von Titan, Zirkonium und ihren
Legierungen (ISO/DIS 15614‑5:2022)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 5:
Soudage à l'arc sur titane, zirconium et leurs alliages (ISO/DIS 15614-5:2022)
Ta slovenski standard je istoveten z: prEN ISO 15614-5
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.120.50 Titan in titanove zlitine Titanium and titanium alloys
oSIST prEN ISO 15614-5:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 15614-5:2022
oSIST prEN ISO 15614-5:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15614-5
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-02-03 2022-04-28
Specification and qualification of welding procedures for
metallic materials — Welding procedure test —
Part 5:
Arc welding of titanium, zirconium and their alloys
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de
qualification d'un mode opératoire de soudage —
Partie 5: Soudage à l'arc sur titane, zirconium et leurs alliages
ICS: 25.160.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15614-5:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

oSIST prEN ISO 15614-5:2022
ISO/DIS 15614-5:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
oSIST prEN ISO 15614-5:2022
ISO/DIS 15614-5:2022(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .2
4 Preliminary welding procedure specification (pWPS) .2
5 Welding procedure test .2
6 Test pieces .2
6.1 General . 2
6.2 Shape and dimensions of test pieces . 2
6.2.1 General . 2
6.2.2 Butt joint in plate with full penetration . 3
6.2.3 Butt joint in pipe with full penetration . 3
6.2.4 T-joint . . 3
6.2.5 Branch connection . 3
6.3 Welding of test pieces . 3
7 Examination and testing . 6
7.1 Extent of testing . 6
7.2 Location and taking of test specimens . 7
7.3 Non-destructive testing . 11
7.4 Destructive testing . 11
7.4.1 General . 11
7.4.2 Transverse tensile test . 11
7.4.3 Bend test . 11
7.4.4 Macro/micro-examination . 11
7.5 Acceptance levels .12
7.6 Coloration . 12
7.7 Re-testing .12
8 Qualification range .12
8.1 General .12
8.2 Requirements related to the manufacturer .12
8.3 Requirements related to the parent material .12
8.3.1 Parent material grouping .12
8.3.2 Material thickness and pipe diameter. 13
8.3.3 Angle of branch connection . 14
8.4 Requirements common to all welding procedures . 15
8.4.1 Welding process . 15
8.4.2 Welding positions . 15
8.4.3 Type of joint and weld . 15
8.4.4 Filler material, designation . 15
8.4.5 Type of current . 15
8.4.6 Interpass temperature .15
8.4.7 Post-weld heat treatment . 16
8.4.8 Backing gas . 16
8.4.9 Welding in a chamber . 16
8.5 Requirements specific to welding processes . 16
8.5.1 Process 131 . 16
8.5.2 Process 141 . 16
8.5.3 Process 15 . 16
9 Welding procedure qualification record (WPQR).16
iii
oSIST prEN ISO 15614-5:2022
ISO/DIS 15614-5:2022(E)
Annex A (informative) Example of a welding procedure qualification record .18
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2014/68/EU (PED) aimed to be covered .22
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2014/29/EU (SPVD) aimed to be covered .23
Bibliography .24
iv
oSIST prEN ISO 15614-5:2022
ISO/DIS 15614-5:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.