Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO 14907-1:2020)

This document specifies the test procedures of electronic fee collection (EFC) roadside equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing which is within the realm of EFC application specifically.
The scope of this document is restricted to systems operating within the radio emission, electromagnetic compatibility (EMC) regulations, traffic, and other regulations of the countries in which they are operated.
This document identifies a set of suitable parameters and provides test procedures to enable the proof of a complete EFC system, as well as components of an EFC system, e.g. OBE, related to the defined requirements of an application. The defined parameter and tests are assigned to the following groups of parameters:
— functionality;
— quality;
— referenced pre-tests.
An overview of the tests and parameters provided by this document is given in 5.1 and 5.2.
This document describes procedures, methods and tools, and a test plan which shows the relation between all tests and the sequence of these tests. It lists all tests that are required to measure the performance of EFC equipment. It describes which EFC equipment is covered by the test procedures; the values of the parameters to be tested are not included. It also describes how the tests are to be performed and which tools and prerequisites are necessary before this series of tests can be undertaken. It is assumed that the security of the system is inherent in the communications and EFC functionality tests, therefore they are not addressed here. All tests in this document provide instructions to evaluate the test results.
This document defines only the tests and test procedures, not the benchmark figures that these are to be measured against. The test procedures defined in this document can be used as input, e.g. by scheme owners, for prototype testing, type approvals, tests of installations and periodic inspections.
Related to a conceptual model of an EFC system, this document relates only to the equipment of the user and the service provider. Any other entities are outside the scope of document.
EFC systems for dedicated short-range communication (DSRC) consist, in principle, of a group of technical components, which in combination fulfil the functions required for the collection of fees by electronic automatic means. These components comprise all, or most, of the following:
— OBE within a vehicle;
— OBE containing the communications and computing sub-functions;
— optional integrated circuit card which may carry electronic money, service rights, and other secured information;
— communication between OBE and RSE based on DSRC;
— equipment for the fee collection at the RSE containing the communications and computing sub-functions;
— equipment for the enforcement at the roadside;
— central equipment for the administration and operation of the system.
The scope of this document relates solely to OBE and RSE and the DSRC interface between OBE and RSE including its functions to perform the fee collection. All the equipment used for enforcement (e.g. detection, classification, localization, and registration) and central equipment are outside the scope of this document.

Elektronische Gebührenerhebung - Testverfahren für straßenseitige und fahrzeugseitige Einrichtungen - Teil 1: Beschreibung von Testverfahren (ISO 14907-1:2020)

Perception de télépéage - Procédures d'essais relatifs aux équipements embarqués et aux équipements fixes - Partie 1: Descriptions des procédures d'essais (ISO 14907-1:2020)

Le présent document spécifie les procédures d'essai des équipements d'infrastructures routières (RSE) et des équipements embarqués (OBE) pour la perception du télépéage (EFC) en ce qui concerne la conformité aux normes et aux exigences pour l'homologation de type et les essais de réception qui concernent plus particulièrement l'application EFC.
Le champ d'application du présent document se restreint aux systèmes fonctionnant dans le cadre des réglementations sur l'émission radio et sur la comptabilité électromagnétique (CEM), sur le trafic et dans le cadre des autres réglementations des pays dans lesquels ils sont exploités.
Le présent document identifie un ensemble de paramètres convenables et fournit des procédures d'essai permettant de vérifier un système EFC complet, ainsi que les composants d'un système EFC, comme par exemple les OBE liés aux exigences définies d'une application. Le paramètre et les essais définis sont affectés aux groupes de paramètres suivants:
— fonctionnement;
— qualité;
— essais préalables cités en référence.
Un aperçu des essais et des paramètres indiqués dans le présent document est donné en 5.1 et 5.2.
Le présent document décrit les procédures, méthodes et outils. Il donne également un plan d'essais qui montre la relation entre tous les essais ainsi que leur séquence. Il énumère tous les essais nécessaires pour mesurer les performances des équipements EFC. Il décrit les équipements EFC couverts par les procédures d'essais, les valeurs des paramètres à contrôler n'étant pas données. Il décrit également comment les essais doivent être effectués et quels sont les outils et prérequis nécessaires avant de pouvoir entreprendre cette série d'essais. Par hypothèse, la sécurité du système est inhérente aux communications et aux essais fonctionnels EFC. Ils ne sont donc pas traités ici. Tous les essais du présent document donnent des instructions sur la manière d'évaluer les résultats des essais.
Ce document ne définit que les tests et les procédures de test, et non les chiffres de référence par rapport auxquels ils doivent être mesurés. Les procédures d'essai définies dans ce document peuvent être utilisées comme base, par exemple par les propriétaires de régimes, pour les essais de prototype, les homologations de type, les essais des installations et les inspections périodiques.
En lien avec un modèle conceptuel de système EFC, le présent document concerne seulement les équipements de l'utilisateur et du fournisseur de service. Toutes les autres entités sont exclues du champ d'application du document.
Les systèmes EFC pour les communications dédiées à courte portée (DSRC) sont en principe constitués d'un groupe de composants techniques qui, ensemble, remplissent les fonctions requises pour la perception des péages par des moyens électroniques automatiques. Ces composants comprennent tout ou partie des éléments suivants:
— OBE à bord d'un véhicule;
— OBE contenant les fonctions de communications et de calcul;
— carte à circuit intégré en option, pouvant comporter de la monnaie électronique, des droits à des services et d'autres informations sécurisées;
— la communication entre OBE et RSE sur la base de DSRC;
— des équipements pour la perception du péage par l'équipement de bord de route qui assure les sous-fonctions de communications et de calcul;
— des équipements de contrôle du respect de la réglementation le long des routes;
— des équipements centraux pour la gestion et l'exploitation du système.

Elektronsko pobiranje pristojbin - Postopki za preskušanje opreme - 1. del: Opis preskusnih postopkov (ISO 14907-1:2020)

General Information

Status
Published
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
01-Jul-2020
Completion Date
01-Jul-2020

RELATIONS

Buy Standard

Standard
EN ISO 14907-1:2020 - BARVE na PDF-str 33,34,35,63,84
English language
96 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 14907-1:2020
01-oktober-2020
Nadomešča:
SIST-TS CEN ISO/TS 14907-1:2015
Elektronsko pobiranje pristojbin - Postopki za preskušanje opreme - 1. del: Opis
preskusnih postopkov (ISO 14907-1:2020)

Electronic fee collection - Test procedures for user and fixed equipment - Part 1:

Description of test procedures (ISO 14907-1:2020)

Elektronische Gebührenerhebung - Testverfahren für straßenseitige und fahrzeugseitige

Einrichtungen - Teil 1: Beschreibung von Testverfahren (ISO 14907-1:2020)

Perception du télépéage - Modes opératoires relatifs aux équipements embarqués et

aux équipements fixes - Partie 1: Description des modes opératoires (ISO 14907-1:2020)

Ta slovenski standard je istoveten z: EN ISO 14907-1:2020
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
SIST EN ISO 14907-1:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 14907-1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 14907-1:2020
EN ISO 14907-1
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2020
EUROPÄISCHE NORM
ICS 35.240.60; 43.040.15 Supersedes CEN ISO/TS 14907-1:2015
English Version
Electronic fee collection - Test procedures for user and
fixed equipment - Part 1: Description of test procedures
(ISO 14907-1:2020)

Perception de télépéage - Procédures d'essais relatifs Elektronische Gebührenerhebung - Testverfahren für

aux équipements embarqués et aux équipements fixes - straßenseitige und fahrzeugseitige Einrichtungen - Teil

Partie 1: Descriptions des procédures d'essais (ISO 1: Beschreibung von Testverfahren (ISO 14907-

14907-1:2020) 1:2020)
This European Standard was approved by CEN on 17 May 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14907-1:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 14907-1:2020
EN ISO 14907-1:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 14907-1:2020
EN ISO 14907-1:2020 (E)
European foreword

This document (EN ISO 14907-1:2020) has been prepared by Technical Committee ISO/TC 204

"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent

transport systems” the secretariat of which is held by NEN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by January 2021, and conflicting national standards shall

be withdrawn at the latest by January 2021.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes CEN ISO/TS 14907-1:2015.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 14907-1:2020 has been approved by CEN as EN ISO 14907-1:2020 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 14907-1:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 14907-1:2020
INTERNATIONAL ISO
STANDARD 14907-1
First edition
2020-03
Electronic fee collection — Test
procedures for user and fixed
equipment —
Part 1:
Description of test procedures
Perception du télépéage — Modes opératoires relatifs aux
équipements embarqués et aux équipements fixes —
Partie 1: Description des modes opératoires
Reference number
ISO 14907-1:2020(E)
ISO 2020
---------------------- Page: 7 ----------------------
SIST EN ISO 14907-1:2020
ISO 14907-1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 14907-1:2020
ISO 14907-1:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 2

3 Terms and definitions ..................................................................................................................................................................................... 2

4 Abbreviated terms .............................................................................................................................................................................................. 6

5 Test parameters and test procedures for EFC ........................................................................................................................ 7

5.1 Tests overview ......................................................................................................................................................................................... 7

5.1.1 General...................................................................................................................................................................................... 7

5.1.2 Functionality tests .......................................................................................................................................................... 8

5.1.3 Quality tests ......................................................................................................................................................................... 9

5.1.4 Referenced pre-tests ..................................................................................................................................................... 9

5.2 Parameter overview ........................................................................................................................................................................... 9

5.3 Test plan .....................................................................................................................................................................................................15

5.4 Required documentation ............................................................................................................................................................15

6 Inspection and tests .......................................................................................................................................................................................16

6.1 Functionality tests .............................................................................................................................................................................16

6.1.1 Communication ..............................................................................................................................................................16

6.1.2 EFC application ..............................................................................................................................................................16

6.1.3 Traffic conditions ...................................................................... ....................................................................................20

6.1.4 Vehicle characteristics..............................................................................................................................................21

6.1.5 Environmental influences .....................................................................................................................................23

6.2 Quality tests ............................................................................................................................................................................................23

6.2.1 Quality management .................................................................................................................................................23

6.2.2 Reliability and availability ....................................................................................................................................24

6.3 Referenced pre-tests .......................................................................................................................................................................24

6.3.1 DSRC ........................................................................................................................................................................................24

6.3.2 Environment .....................................................................................................................................................................25

6.3.3 EMC...........................................................................................................................................................................................25

7 Evaluation and certification ..................................................................................................................................................................25

7.1 Evaluation .................................................................................................................................................................................................25

7.2 Certification ............................................................................................................................................................................................26

Annex A (informative) How to use this document ...............................................................................................................................27

Annex B (informative) Traffic, vehicle, and other performance tests .............................................................................29

Annex C (informative) Reliability/availability tests ..........................................................................................................................50

Annex D (informative) Classes of equipment ...........................................................................................................................................56

Annex E (informative) Examples for statistical calculations ....................................................................................................58

Annex F (informative) Examples of referenced pre-tests based on European test procedures ...........62

Annex G (informative) Test methods and tools ......................................................................................................................................67

Annex H (informative) Examples of EFC scenarios .............................................................................................................................74

Annex I (informative) Examples of referenced pre-tests based on Japanese test procedures ..............81

Bibliography .............................................................................................................................................................................................................................84

© ISO 2020 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 14907-1:2020
ISO 14907-1:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/

iso/ foreword .html.

The committee responsible for this document is ISO/TC 204, Intelligent transport systems.

This edition cancels and replaces the third edition of ISO/TS 14907-1:2015.
The main changes compared to the previous edition are as follows:

— the document has been converted from a Technical Specification to an International Standard;

— the references have been revised.
A list of all parts in the ISO 14907 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 14907-1:2020
ISO 14907-1:2020(E)
Introduction

For an electronic fee collection (EFC) system, approvals and tests are required to determine whether the

system (or individual components of the system) conforms to standards and application requirements

and to enable parameters such as quality, availability, and maintainability to be measured.

There are complete EFC systems available, including documentation and approvals, and these could

already be in operation in some European countries. This document provides a toolbox of tests and

procedures for the assessment and proof of such EFC systems that they are suitable for specified EFC

applications under specific operational conditions. Dependent on a system to be tested and based on

the available documentation and the status of previously performed approvals, this document enables

parties involved, e.g. system provider, operators, and test houses, to take into consideration already

proven references and to identify such parameters which still have to be tested according to the

specified applications.

At the time of publication of this document, the determination of common system requirements for

Europe (or any other region) has not been agreed. For this reason, this document does not specify any

particular performance requirements, unless these are already determined elsewhere (such as safety

or radio regulations), but rather identifies the key parameters which will comprise such requirements.

Where reference to an existing test is available, this document provides that reference. This document

defines only the test and test procedures, not the benchmark figures that these are to be measured

against. Benchmark figures which the systems or components under test can be compared with

and validated against might form the subject of a future part of this series of standards. Within the

framework of the European Electronic Toll System (EETS), this document could provide inputs for the

work of the notified bodies in view to certify the different systems' part of the EETS in particular to

check the suitability for use.

This document is furthermore limited to automated (electronic) payment using a standardized

dedicated short-range communication (DSRC). The scope of this document does not include manual

payment, conventional money transaction, nor payment by means of sticker, vignettes, tickets, or

magnetic-stripe cards, etc. The applications to which EFC is related are toll collection, road pricing,

parking, and individual traffic information.

This document enables groups of operators to determine common specific performance levels and

operating conditions and to enable regional variation where appropriate. It provides operating and

environmental parameters (or classes of operating and environmental parameters) within which such

systems shall successfully function without impairing interoperability to ensure that the person who

specified the system can state their requirements clearly to implementation designers and integrators

and to enable the measurement of the performance of such systems.

The following guidelines have been followed when selecting the test procedures for test parameters:

— reference as far as possible to existing standardized test procedures;

— focusing on those tests that are essential to ensure that EFC equipment is able to exchange

information and mutually use the exchanged information.
A brief guide describing how to use this document is provided by Annex A.

While this document relates to general test procedures, certain provisions relate specifically to test

procedures for certification purposes. Many features of this document are relevant internationally; it is

recognized that due to different regulatory requirements outside Europe, extension may be required to

make its applicability as comprehensive in non-EU countries, before this International Standard can be

reviewed for acceptance as in EU countries.

The ISO/TS 17444 series provides an examination framework for EFC charging performance.

This document relates only to the equipment of the user and the service provider as illustrated in

Figure 1.
© ISO 2020 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 14907-1:2020
ISO 14907-1:2020(E)
Figure 1 — Conceptual model of EFC

The scope of this document relates solely to OBE and RSE and the DSRC interface between OBE and RSE

including its functions to perform the fee collection as illustrated by Figure 2.

Figure 2 — OBE/RSE interface and associated environments
vi © ISO 2020 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 14907-1:2020
INTERNATIONAL STANDARD ISO 14907-1:2020(E)
Electronic fee collection — Test procedures for user and
fixed equipment —
Part 1:
Description of test procedures
1 Scope

This document specifies the test procedures of electronic fee collection (EFC) roadside equipment

(RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements

for type approval and acceptance testing which is within the realm of EFC application specifically.

The scope of this document is restricted to systems operating within the radio emission, electromagnetic

compatibility (EMC) regulations, traffic, and other regulations of the countries in which they are

operated.

This document identifies a set of suitable parameters and provides test procedures to enable the proof

of a complete EFC system, as well as components of an EFC system, e.g. OBE, related to the defined

requirements of an application. The defined parameter and tests are assigned to the following groups

of parameters:
— functionality;
— quality;
— referenced pre-tests.

An overview of the tests and parameters provided by this document is given in 5.1 and 5.2.

This document describes procedures, methods and tools, and a test plan which shows the relation

between all tests and the sequence of these tests. It lists all tests that are required to measure the

performance of EFC equipment. It describes which EFC equipment is covered by the test procedures;

the values of the parameters to be tested are not included. It also describes how the tests are to be

performed and which tools and prerequisites are necessary before this series of tests can be undertaken.

It is assumed that the security of the system is inherent in the communications and EFC functionality

tests, therefore they are not addressed here. All tests in this document provide instructions to evaluate

the test results.

This document defines only the tests and test procedures, not the benchmark figures that these are to

be measured against. The test procedures defined in this document can be used as input, e.g. by scheme

owners, for prototype testing, type approvals, tests of installations and periodic inspections.

Related to a conceptual model of an EFC system, this document relates only to the equipment of the user

and the service provider. Any other entities are outside the scope of document.

EFC systems for dedicated short-range communication (DSRC) consist, in principle, of a group of

technical components, which in combination fulfil the functions required for the collection of fees by

electronic automatic means. These components comprise all, or most, of the following:

— OBE within a vehicle;
— OBE containing the communications and computing sub-functions;

— optional integrated circuit card which may carry electronic money, service rights, and other secured

information;
© ISO 2020 – All rights reserved 1
---------------------- Page: 13 ----------------------
SIST EN ISO 14907-1:2020
ISO 14907-1:2020(E)
— communication between OBE and RSE based on DSRC;

— equipment for the fee collection at the RSE containing the communications and computing sub-

functions;
— equipment for the enforcement at the roadside;
— central equipment for the administration and operation of the system.

The scope of this document relates solely to OBE and RSE and the DSRC interface between OBE and

RSE including its functions to perform the fee collection. All the equipment used for enforcement (e.g.

detection, classification, localization, and registration) and central equipment are outside the scope of

this document.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories

ISO/IEC 17065:2012, Conformity assessment — Requirements for bodies certifying products, processes

and services
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1
acceptance testing

examination that a product, process, or service is in conformity with the system specification

3.2
accreditation

third-party attestation (3.3) related to a conformity assessment body (3.7) conveying formal

demonstration of its competence, consistent operation and impartiality (3.15) in performing specific

conformity assessment activities
[SOURCE: ISO/IEC 17000:2020, 2.4.7]
3.3
attestation

issue of a statement, based on a decision (3.8) that fulfilment of specified requirements (3.27) has been

demonstrated

Note 1 to entry: The resulting statement, referred to in this document as a “statement of conformity”, is intended

to convey the assurance that the specified requirements have been fulfilled. Such an assurance does not, of itself,

afford contractual or other legal guarantees.

Note 2 to entry: First-party and third-party attestations are distinguished by the terms 2.4.2 to 2.4.7 in

ISO/IEC 17000:2020. For second-party attestation, no such term is available.
[SOURCE: ISO/IEC 17000:2020, 2.4.3]
2 © ISO 2020 – All rights reserved
---------------------- Page: 14 ----------------------
SIST EN ISO 14907-1:2020
ISO 14907-1:2020(E)
3.4
availability
property of being accessible and useable upon demand by an authorized entity
[SOURCE: ISO 7498-2:1989, 3.3.11]
3.5
certification

third-party attestation (3.3) related to objects of conformity assessment (3.20), with the exception of

conformity assessment bodies (3.7)

Note 1 to entry: Certification is applicable to all objects of conformity assessment except for conformity

assessment bodies themselves, to which accreditation (3.2) is applicable.
[SOURCE: ISO/IEC 17000:2020, 2.4.6]
3.6
compatibility

suitability of products, processes, or services for use together under specific conditions to fulfil relevant

requirements without causing unacceptable interactions
3.7
conformity assessment body

body that performs conformity assessment activities, excluding accreditation (3.2)

[SOURCE: ISO/IEC 17000:2020, 2.1.6]
3.8
decision

conclusion based on the results of review (3.24), that fulfilment of specified requirements (3.27) has or

has not been demonstrated
[SOURCE: ISO/IEC 17000:2020, 2.4.2]
3.9
EFC equipment
equipment comprising roadside equipment (RSE) and on-board equipment (OBE)
3.10
EFC system
system that enables electronic debiting for the use of transport services
3.11
evaluation

systematic process of determining how individuals, procedures, systems, or programs have met

formally agreed objectives and requirements
[SOURCE: ISO/TS 10798:2011, 1.90]
3.12
evaluation assurance level

set of assurance requirements, usually involving documentation, analysis and testing, representing a

point on a predefined assurance scale, that forms an assurance package
3.13
field test
test that is performed under real-life conditions
© ISO 2020 – All rights reserved 3
---------------------- Page: 15 ----------------------
SIST EN ISO 14907-1:2020
ISO 14907-1:2020(E)
3.14
functionality test
assessing the performance of an EFC system, based on specific parameters

Note 1 to entry: Functionality parameters can include communication, application, and vehicle and traffic

characteristics.
3.15
impartiality
objectivity with regard to the outcome of a conformity a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.