iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10274:1999

(Main)

Metallic materials - Drop weight tear test

Metallic materials - Drop weight tear test

This European Standard specifies the drop weight tear test for meatallic materials and includes a method for assessing the fracture appearance of ferritic steels. Assessment can also be based on the energy absorbed in fracturing the test piece, particularly for materials other than ferritic steels.

Metallische Werkstoffe - Fallgewichtsversuch

In dieser Europäischen Norm ist der Fallgewichtsversuch für metallische Werkstoffe festgelegt. Es wird ein Verfahren zur Bewertung des Aussehens von Bruchflächen ferritischer Stählen beschrieben. Die Auswertung kann auch auf der von der Probe verbrauchten Schlagarbeit basieren, insbesondere wenn keine ferritischen Stähle verwendet werden.

Matériaux métalliques - Essai de chute de masse

La présente norme européenne prescrit l'essai de chute de masse destiné aux matériaux métalliques et inclut une méthode permettant d'évaluer le faciès de rupture des matériaux ferritiques. L'évaluation peut également être basée sur l'énergie absorbée lors de la rupture de l'éprouvette, notamment dans le cas de matériaux autres que les aciers ferritiques.

Kovinski materiali - Udarni pregibni preskus

General Information

Status
Published
Publication Date
18-May-1999
Withdrawal Date
29-Nov-1999
ICS
77.040.10 - Mechanical testing of metals
Technical Committee
ECISS/TC 110 - Steel tubes, and iron and steel fittings
Drafting Committee
ECISS/TC 29/SC 9 - Mechanical testing of tubes
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Dec-2020
Mandate
M/005 - Mandate to CEN/ECISS concerning standardization in the iron and steel sector
Ref Project
SIST EN 10274:2000 - Metallic materials - Drop weight tear test

Buy Standard

EN 10274:2000EN 10274:2000
PreviousNext
Standard
EN 10274:2000
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kovinski materiali - Udarni pregibni preskusMetallische Werkstoffe - FallgewichtsversuchMatériaux métalliques - Essai de chute de masseMetallic materials - Drop weight tear test77.040.10Mehansko preskušanje kovinMechanical testing of metalsICS:Ta slovenski standard je istoveten z:EN 10274:19
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 8494:2013(Main)
Metallic materials - Tube - Flanging test (ISO 8494:2013)
SIST EN ISO 8494:2014

ISO 8494:2013 specifies a method for determining the ability of metallic tubes of circular cross-section to undergo plastic deformation during flange formation.
ISO 8494:2013 is intended for tubes having an outside diameter no greater than 150 mm and a wall thickness no greater than 10 mm, although the range of diameters or wall thickness for which ISO 8494:2013 is applicable may be more exactly specified in the relevant product standard.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8496:2013(Main)
Metallic materials - Tube - Ring tensile test (ISO 8496:2013)
SIST EN ISO 8496:2014

ISO 8496:2013 specifies a method for a ring tensile test of tubes to reveal surface and internal defects by subjecting the test piece to strain until fracture occurs. This test may also be used to assess the ductility of tubes.
The ring tensile test is applicable to tubes having an outside diameter exceeding 150 mm and a wall thickness no greater than 40 mm. The inside diameter shall be greater than 100 mm.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8492:2013(Main)
Metallic materials - Tube - Flattening test (ISO 8492:2013)
SIST EN ISO 8492:2014

ISO 8492:2013 specifies a method for determining the ability of metallic tubes of circular cross-section to undergo plastic deformation by flattening. It may also be used to reveal the defects in the tubes.
ISO 8492:2013 is applicable to tubes having an outside diameter no greater than 600 mm and a thickness no greater than 15 % of the outside diameter. The range of the outside diameter or thickness, for which this International Standard is applicable, may be more exactly specified in the relevant product standard.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8495:2013(Main)
Metallic materials - Tube - Ring-expanding test (ISO 8495:2013)
SIST EN ISO 8495:2014

ISO 8495:2013 specifies a method for a ring-expanding test on tubes, that is used to reveal defects both on the surfaces and within the tube wall by expanding the test piece using a conical mandrel until fracture occurs. It may be also used to assess the ability of tubes to undergo plastic deformation.
The ring-expanding test is applicable to tubes having an outside diameter from 18 mm up to and including 150 mm and a wall thickness from 2 mm up to and including 16 mm.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8493:2004(Main)
Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
SIST EN ISO 8493:2004

WI created following Res COCOR 10/2001: approval of ECISS/TC 29 business plan (CC/010719)

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8491:2004(Main)
Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998)
SIST EN ISO 8491:2004

This International Standard specifies a method for determining the ability of full-section metallic tubes of circular cross-section to undergo plastic deformation in bending. It is intended for tubes with an outside diameter no greater than 65 mm, although the range of the outside diameter for which this International Standard is applicable may be more exactly specified in the relevant product standard.
NOTE - Bend tests of the test pieces taken from tubes in the form of transverse strips should be made in accordance with ISO 7438 so as to increase the original curvature of the test piece.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10275:1999(Main)
Metallic materials - Tube ring hydraulic pressure test
SIST EN 10275:2000

This European Standard specifies the ring hydraulic pressure test for metallic tubes. It is generally applied to tubes with an outside diameter generally greater than 120 mm and outside diameter to thickness ratio not less than 20. The objective of this test is to ascertain the value of the hoop stress required to produce a specified total circumferential (hoop) strain.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6508-2:2023(Main)
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2023)
SIST EN ISO 6508-2:2024

This document specifies two separate methods of verification of testing machines (direct and indirect) for determining Rockwell hardness in accordance with ISO 6508-1, together with a method for verifying Rockwell hardness indenters.
The direct verification method is used to determine whether the main parameters associated with the machine function, such as applied force, depth measurement, and testing cycle timing, fall within specified tolerances. The indirect verification method uses a number of calibrated reference hardness blocks to determine how well the machine can measure a material of known hardness.
This document is applicable to stationary and portable hardness testing machines.
Attention is drawn to the fact that the use of tungsten carbide composite for ball indenters is considered to be the standard type of Rockwell indenter ball.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6508-3:2023(Main)
Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2023)
SIST EN ISO 6508-3:2024

This document specifies a method for the calibration of reference blocks to be used for the indirect and daily verification of Rockwell hardness testing machines and indenters, as specified in ISO 6508-2. This document also specifies requirements for Rockwell machines and indenters used for calibrating reference blocks and specifies methods for their calibration and verification.
Attention is drawn to the fact that the use of hard metal for ball indenters is considered to be the standard type of Rockwell indenter ball.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6508-1:2023(Main)
Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)
SIST EN ISO 6508-1:2024

This document specifies the method for Rockwell regular and Rockwell superficial hardness tests for scales A, B, C, D, E, F, G, H, K, 15N, 30N, 45N, 15T, 30T, and 45T for metallic materials and is applicable to stationary and portable hardness testing machines.
For specific materials and/or products, other specific International Standards apply (e.g. ISO 3738-1 and ISO 4498).

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day